Use of Modal Flexibility for Damage Detection and Condition Assessment: Case Studies and Demonstrations on Large Structures

Displacement coefficients and profiles are presented as promising kernel condition and damage indices along with real-life examples. It is shown that dynamic tests, which do not require stationary reference measurement locations, can also be used to generate data for the computation of modal flexibility. Modal flexibility can then be employed to obtain the displacement profiles. It is also shown that the modal flexibility can be obtained from the frequency response function measurements of the structures. Problems such as environmental effects on measured data and limitations such as incomplete dynamic measurements, spatial and temporal truncation effects are commonly faced in damage detection and condition assessment of real structures. Possible approaches to mitigate these obstacles are discussed. The level of variation and the uncertainty that may be expected when displacement coefficients are extracted from real civil infrastructure systems are also presented. The methods are demonstrated on two real-life bridges and the findings are validated by independent test results.

[1]  Bart Peeters,et al.  Comparison of ambient and Forced Vibration Testing of civil engineering structures , 1999 .

[2]  Randall J. Allemang,et al.  A UNIFIED MATRIX POLYNOMIAL APPROACH TO MODAL IDENTIFICATION , 1998 .

[3]  Nicholas A J Lieven,et al.  Damage Prognosis: Current Status and Future Needs , 2003 .

[4]  Ahmet E. Aktan,et al.  FLEXIBILITY BY MULTIREFERENCE IMPACT TESTING FOR BRIDGE DIAGNOSTICS , 1992 .

[5]  Erik A. Johnson,et al.  Phase I IASC-ASCE Structural Health Monitoring Benchmark Problem Using Simulated Data , 2004 .

[6]  Ahmet E. Aktan,et al.  Issues in multi-reference impact testing of steel-stringer bridges , 1997 .

[7]  Charles R. Farrar,et al.  Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: A literature review , 1996 .

[8]  A. Emin Aktan,et al.  Parameter Estimation for Multiple-Input Multiple-Output Modal Analysis of Large Structures , 2004 .

[9]  Ahmet E. Aktan,et al.  ISSUES IN INFRASTRUCTURE HEALTH MONITORING FOR MANAGEMENT , 2000 .

[10]  Rune Brincker,et al.  Identification of the Swiss Z24 Highway Bridge by Frequency Domain Decomposition , 2002 .

[11]  Richard B. Nelson,et al.  Structural identification and damage assessment of large space structures , 1988 .

[12]  Ahmet E. Aktan,et al.  Bridge-condition assessment by modal flexibility , 1994 .

[13]  A. Emin Aktan,et al.  CONDITION AND DAMAGE ASSESSMENT: ISSUES AND SOME PROMISING INDICES , 2002 .

[14]  Jun Zhao,et al.  Sensitivity Study for Vibrational Parameters Used in Damage Detection , 1999 .

[15]  G. De Roeck,et al.  Z24 bridge damage detection tests , 1999 .