Numerical Assessment of Frictional Heating in Sliding Bearings for Seismic Isolation

This article proposes a numerical investigation of the frictional heating developed in sliding bearings under high velocities and the influence of the relevant temperature rise on the mechanical characteristics of the device. A three-dimensional finite element model of the bearing is created and frictional heat generation is modelled through a thermal source inserted at the sliding surface of the bearing, with intensity dependent on the coefficient of friction, the contact pressure and the velocity. The friction value is adjusted step-by-step on surface temperature and velocity and used to update the thermal flux and the resisting force developed by the bearing. The numerical predictions of temperature histories and force–displacement loops are compared with the results of laboratory tests to validate the numerical approach. The procedure can help in preliminary studies for the selection of bearing materials accounting for their thermal stability and for the estimation of change of design properties of sliding isolation bearings due to frictional heating.

[1]  M. Dolce,et al.  Frictional Behavior of Steel-PTFE Interfaces for Seismic Isolation , 2005 .

[2]  Michael C. Constantinou.  NCEER-TAISEI CORPORATION RESEARCH PROGRAM ON SLIDING SEISMIC ISOLATION SYSTEMS FOR BRIDGES EXPERIMENTAL AND ANALYTICAL STUDY OF A FRICTION PENDULUM SYSTEM (FPS). , 1993 .

[3]  Andrei M. Reinhorn,et al.  Teflon Bearings in Base Isolation II: Modeling , 1990 .

[4]  E. Gandelli,et al.  Numerical Assessment of the Seismic Performance of Sliding Pendulum Isolators , 2012 .

[5]  Stephen A. Mahin,et al.  A Simple Pendulum Technique for Achieving Seismic Isolation , 1990 .

[6]  C. S. Tsai,et al.  Component and shaking table tests for full‐scale multiple friction pendulum system , 2006 .

[7]  Michael C. Constantinou,et al.  Seismic isolation retrofit of large historic building , 1996 .

[8]  Michael Smith,et al.  ABAQUS/Standard User's Manual, Version 6.9 , 2009 .

[9]  Edward Cohen,et al.  Minimum Design Loads for Buildings and Other Structures , 1990 .

[10]  Michael C. Constantinou,et al.  Experimental Study of Friction‐Pendulum Isolation System , 1991 .

[11]  Bryan E. Little,et al.  American Association of State Highway and Transportation Officials. Highway Drainage Guidelines American Association of State Highway and Transportation Officials. LRFD Bridge Design Specifications , 2000 .

[12]  Hong-Ki Hong,et al.  Coulomb friction oscillator : Modelling and responses to harmonic loads and base excitations , 2000 .

[13]  Andrew S. Whittaker,et al.  Performance of Seismic Isolation Hardware under Service and Seismic Loading , 2007 .

[14]  N. Null.  Minimum Design Loads for Buildings and Other Structures , 2003 .

[15]  Yu. N. Drozdov,et al.  Heat state of pendulum sliding bearings under seismic effects , 2008 .

[16]  Andrew S. Whittaker,et al.  Characterization and Modeling of Friction Pendulum Bearings Subjected to Multiple Components of Excitation , 2004 .

[17]  C. Ettles.  Polymer and elastomer friction in the thermal control regime , 1987 .

[18]  Christian Braun.  The sliding isolation pendulum – an improved recentring bridge bearing , 2009 .

[19]  Carlo Poggi,et al.  Experimental assessment of sliding materials for seismic isolation systems , 2012, Bulletin of Earthquake Engineering.

[20]  L. Rosenhead.  Conduction of Heat in Solids , 1947, Nature.

[21]  P. C Tsopelas,et al.  NCEER - Taisei Corporation Research Program on Sliding Seismic Isolation Systems for Bridges : Experimental and analytical study of a system consisting of sliding bearings and fluid restoring force/damping devices , 1994 .

[22]  S J Clarke,et al.  Structural Platform Solution for Seismic Arctic Environments--Sakhalin II Offshore , 2005 .

[23]  Igor Lanese,et al.  Development of Software and Hardware Architecture for Real-Time Dynamic Hybrid Testing and Application to a Base Isolated Structure , 2012 .

[24]  Alberto Pavese,et al.  Design of a large-scale dynamic and pseudo-dynamic testing facility , 2005 .

[25]  S. Emerson,et al.  AASHTO (American Association of State Highway and Transportation Officials). 2001. A Policy on Geometric Design of Highways and Streets. Fourth Edition. Washington, D.C. , 2007 .