One-shot additive manufacturing of robotic finger with embedded sensing and actuation

[1]  Sean K. Powell,et al.  Mechanical behaviour of flexible 3D printed gyroid structures as a tuneable replacement for soft padding foam , 2022, Additive Manufacturing.

[2]  J. Slavič,et al.  Single‐Process 3D‐Printed Triaxial Accelerometer , 2021, Advanced Materials Technologies.

[3]  I. Ashcroft,et al.  Material extrusion additive manufacturing of continuous fibre reinforced polymer matrix composites: A review and outlook , 2021 .

[4]  W. Shu,et al.  Sacrificial 3D Printing of Highly Porous, Soft Pressure Sensors , 2021, Advanced Electronic Materials.

[5]  Gianluca Percoco,et al.  Thermal Characterization of New 3D-Printed Bendable, Coplanar Capacitive Sensors , 2021, Sensors.

[6]  E. Toyserkani,et al.  Additive manufacture of porous ceramic proximal interphalangeal (PIP) joint implant: design and process optimization , 2021, The International Journal of Advanced Manufacturing Technology.

[7]  Stefano Stramigioli,et al.  Modelling of Anisotropic Electrical Conduction in Layered Structures 3D-Printed with Fused Deposition Modelling , 2021, Sensors.

[8]  B. Vanderborght,et al.  A Sensorized Soft Pneumatic Actuator Fabricated with Extrusion-Based Additive Manufacturing , 2021, Actuators.

[9]  A. Ehrmann,et al.  3D printing of shape memory polymers , 2021, Journal of Applied Polymer Science.

[10]  J. Slavič,et al.  Design principles for a single-process 3d-printed accelerometer – theory and experiment , 2021 .

[11]  Xueliang Xiao,et al.  Tracing evolutions in electro-activated shape memory polymer composites with 4D printing strategies: A systematic review , 2021 .

[12]  O. González-Estrada,et al.  Mechanical properties for long fibre reinforced fused deposition manufactured composites , 2021 .

[13]  Amir Hosein Sakhaei,et al.  Shape memory alloy based 3D printed composite actuators with variable stiffness and large reversible deformation , 2021 .

[14]  R. Wicker,et al.  Intermittent Embedding of Wire into 3D Prints for Wireless Power Transfer , 2021, International Journal of Precision Engineering and Manufacturing.

[15]  F. Berto,et al.  Fused Filament Fabrication-4D-Printed Shape Memory Polymers: A Review , 2021, Polymers.

[16]  A. Rusinek,et al.  Conductive 3D printed PLA composites: On the interplay of mechanical, electrical and thermal behaviours , 2021 .

[17]  E. Iwase,et al.  Hybrid hinge structure with elastic hinge on self-folding of 4D printing using a fused deposition modeling 3D printer , 2021 .

[18]  Choon Chiang Foo,et al.  3D Printed Metamaterial Capacitive Sensing Array for Universal Jamming Gripper and Human Joint Wearables , 2021, Advanced Engineering Materials.

[19]  Cagri Ayranci,et al.  Advances in additive manufacturing of shape memory polymer composites , 2021 .

[20]  Yonas Tadesse,et al.  A Soft 3D-Printed Robotic Hand Actuated by Coiled SMA , 2020, Actuators.

[21]  S. Stramigioli,et al.  A Review of Extrusion-Based 3D Printing for the Fabrication of Electro- and Biomechanical Sensors , 2020, IEEE Sensors Journal.

[22]  Jorge A. Cardenas,et al.  Flash ablation metallization of conductive thermoplastics , 2020 .

[23]  J. Slavič,et al.  Experimental identification of the dynamic piezoresistivity of fused-filament-fabricated structures , 2020 .

[24]  Yin Bi,et al.  Research progress of flexible capacitive pressure sensor for sensitivity enhancement approaches , 2020 .

[25]  A. Di Nisio,et al.  Fused filament fabrication of commercial conductive filaments: experimental study on the process parameters aimed at the minimization, repeatability and thermal characterization of electrical resistance , 2020, The International Journal of Advanced Manufacturing Technology.

[26]  Carlo Alberto Avizzano,et al.  On the integration of FBG sensing technology into robotic grippers , 2020, The International Journal of Advanced Manufacturing Technology.

[27]  E. Pei,et al.  The Influence of Shape Changing Behaviors from 4D Printing through Material Extrusion Print Patterns and Infill Densities , 2020, Materials.

[28]  Abbas Z. Kouzani,et al.  3D/4D-printed bending-type soft pneumatic actuators: fabrication, modelling, and control , 2020, Virtual and Physical Prototyping.

[29]  Yee Ling Yap,et al.  A review of 3D printing processes and materials for soft robotics , 2020, Rapid Prototyping Journal.

[30]  Denny Oetomo,et al.  A practical 3D-printed soft robotic prosthetic hand with multi-articulating capabilities , 2020, PloS one.

[31]  Gianluca Percoco,et al.  Additive Manufacturing for Soft Robotics: Design and Fabrication of Airtight, Monolithic Bending PneuNets with Embedded Air Connectors , 2020, Micromachines.

[32]  Dichen Li,et al.  Design and additive manufacturing of flexible polycaprolactone scaffolds with highly-tunable mechanical properties for soft tissue engineering , 2020 .

[33]  A. Seyam,et al.  A critical review on 3D printed continuous fiber-reinforced composites: History, mechanism, materials and properties , 2020 .

[34]  Yonas Tadesse,et al.  Multidirectional 3D-printed functionally graded modular joint actuated by TCPFL muscles for soft robots , 2019, Bio-Design and Manufacturing.

[35]  S. Natarajan,et al.  Prediction of geometric characteristics in polycaprolactone (PCL) scaffolds produced by extrusion-based additive manufacturing technique for tissue engineering , 2019, Rapid Prototyping Journal.

[36]  H. Rodrigue,et al.  Long Shape Memory Alloy Tendon-based Soft Robotic Actuators and Implementation as a Soft Gripper , 2019, Scientific Reports.

[37]  Arup Dey,et al.  A Systematic Survey of FDM Process Parameter Optimization and Their Influence on Part Characteristics , 2019, Journal of Manufacturing and Materials Processing.

[38]  Filippo Cianetti,et al.  Dynamic Measurements Using FDM 3D-Printed Embedded Strain Sensors , 2019, Sensors.

[39]  Amir Hosein Sakhaei,et al.  Multimaterial 3D Printed Soft Actuators Powered by Shape Memory Alloy Wires , 2019, Sensors and Actuators A: Physical.

[40]  D. Floreano,et al.  Soft Robotic Grippers , 2018, Advanced materials.

[41]  Bernard Bayle,et al.  Soft Robots Manufacturing: A Review , 2018, Front. Robot. AI.

[42]  Thomas J. Wallin,et al.  3D printing of soft robotic systems , 2018, Nature Reviews Materials.

[43]  L. Weiss,et al.  Temperature-dependent electrical resistance of conductive polylactic acid filament for fused deposition modeling , 2018, The International Journal of Advanced Manufacturing Technology.

[44]  Yonghua Chen,et al.  Innovative Design of Embedded Pressure and Position Sensors for Soft Actuators , 2018, IEEE Robotics and Automation Letters.

[45]  Kyung Hyun Choi,et al.  3D printing for soft robotics – a review , 2018, Science and technology of advanced materials.

[46]  Gerhard Neumann,et al.  Directly Printable Flexible Strain Sensors for Bending and Contact Feedback of Soft Actuators , 2018, Front. Robot. AI.

[47]  Sri Hinduja,et al.  Structural Evolution of PCL during Melt Extrusion 3D Printing , 2018 .

[48]  Conor J. Walsh,et al.  A Highly Sensitive Capacitive‐Based Soft Pressure Sensor Based on a Conductive Fabric and a Microporous Dielectric Layer , 2018 .

[49]  Siew Ting Melissa Tan,et al.  Electrically conductive filament for 3D-printed circuits and sensors , 2017 .

[50]  Sung-hoon Ahn,et al.  Curved shape memory alloy-based soft actuators and application to soft gripper , 2017 .

[51]  Inkyu Park,et al.  Sensors and Actuators A: Physical , 2017 .

[52]  A. Sulong,et al.  A review of electrical conductivity models for conductive polymer composite , 2017 .

[53]  M SpinksGeoffrey,et al.  3D Printed Flexure Hinges for Soft Monolithic Prosthetic Fingers , 2016 .

[54]  Sung-Hoon Ahn,et al.  SMA-based smart soft composite structure capable of multiple modes of actuation , 2015 .

[55]  Martin L. Dunn,et al.  Sequential Self-Folding Structures by 3D Printed Digital Shape Memory Polymers , 2015, Scientific Reports.

[56]  Sung-Hoon Ahn,et al.  A shape memory alloy–based soft morphing actuator capable of pure twisting motion , 2015 .

[57]  Martin L. Dunn,et al.  Active origami by 4D printing , 2014 .

[58]  P. Jha,et al.  Shape and Size Dependent Melting Point Temperature of Nanoparticles , 2008 .

[59]  Gianluca Percoco,et al.  Additive manufacturing aimed to soft robots fabrication: A review , 2021 .

[60]  Xiaobo Tan,et al.  Soft Actuators with Stiffness and Shape Modulation Using 3D-Printed Conductive Polylactic Acid Material. , 2019, Soft robotics.

[61]  Sung-Hoon Ahn,et al.  Shape Memory Alloy-Based Soft Gripper with Variable Stiffness for Compliant and Effective Grasping. , 2017, Soft robotics.

[62]  Elisabetta Ceretti,et al.  Multi-layered Scaffolds Production via Fused Deposition Modeling (FDM) Using an Open Source 3D Printer: Process Parameters Optimization for Dimensional Accuracy and Design Reproducibility , 2017 .