A toolbox for supporting the design of large-scale capacitive tactile systems

In the process of covering a generic robot with artificial skin, it is necessary to use design tools allowing designers to specify and validate tactile requirements for the scenario at hand. In particular, given a set of well-defined functional requirements (e.g., minimum spatial sensitivity or minimum force to detect), there are two needs to be fulfilled: (i) to check the artificial skin capability to meet these requirements and criteria; (ii) to drive the customization process to find a reasoned trade-off between different (and possibly conflicting) design parameters, such as dielectric thickness or taxel diameter. The main contribution of this article is the description of a robot skin design toolbox based on Finite Element Analysis, able to provide the designer with insights in the behaviour of large scale tactile systems.

[1]  Fulvio Mastrogiovanni,et al.  Design of an embedded networking infrastructure for whole-body tactile sensing in humanoid robots , 2010, 2010 10th IEEE-RAS International Conference on Humanoid Robots.

[2]  S. Yahud,et al.  Finite element analysis of a tactile sensor for a robotic hand , 2008, 2008 International Conference on Intelligent Sensors, Sensor Networks and Information Processing.

[3]  Minoru Asada,et al.  CB2: A child robot with biomimetic body for cognitive developmental robotics , 2007, 2007 7th IEEE-RAS International Conference on Humanoid Robots.

[4]  Masayuki Inaba,et al.  Development of musculoskeletal humanoid Kotaro , 2006, Proceedings 2006 IEEE International Conference on Robotics and Automation, 2006. ICRA 2006..

[5]  Giulio Sandini,et al.  An embedded artificial skin for humanoid robots , 2008, 2008 IEEE International Conference on Multisensor Fusion and Integration for Intelligent Systems.

[6]  Yasuo Kuniyoshi,et al.  A highly stretchable tactile distribution sensor for smooth surfaced humanoids , 2007, 2007 7th IEEE-RAS International Conference on Humanoid Robots.

[7]  M. Shimojo,et al.  Spatial filtering characteristic of elastic cover for tactile sensor , 1994, Proceedings of the 1994 IEEE International Conference on Robotics and Automation.

[8]  Giorgio Metta,et al.  Methods and Technologies for the Implementation of Large-Scale Robot Tactile Sensors , 2011, IEEE Transactions on Robotics.

[9]  Chih-Chieh Wen,et al.  Tuning the sensing range and sensitivity of three axes tactile sensors using the polymer composite membrane , 2008 .

[10]  Makoto Shimojo,et al.  Mechanical filtering effect of elastic cover for tactile sensor , 1997, IEEE Trans. Robotics Autom..

[11]  Van Anh Ho,et al.  Analysis of sliding of a soft fingertip embedded with a novel micro force/moment sensor: Simulation, experiment, and application , 2009, 2009 IEEE International Conference on Robotics and Automation.

[12]  S. Laurie Ricker,et al.  2-D finite-element models of tactile sensors , 1993, [1993] Proceedings IEEE International Conference on Robotics and Automation.

[13]  Takashi Maeno,et al.  Friction estimation by pressing an elastic finger-shaped sensor against a surface , 2004, IEEE Transactions on Robotics and Automation.

[14]  Yasuo Kuniyoshi,et al.  Wearable motion capture suit with full-body tactile sensors , 2009, 2009 IEEE International Conference on Robotics and Automation.

[15]  Benjamin C. K. Tee,et al.  Highly sensitive flexible pressure sensors with microstructured rubber dielectric layers. , 2010, Nature materials.

[16]  Fulvio Mastrogiovanni,et al.  Towards automated self-calibration of robot skin , 2010, 2010 IEEE International Conference on Robotics and Automation.

[17]  K. Johnson.  Contact Mechanics: Frontmatter , 1985 .

[18]  Giulio Sandini,et al.  Tactile Sensing—From Humans to Humanoids , 2010, IEEE Transactions on Robotics.

[19]  Yasuo Kuniyoshi,et al.  Conformable and scalable tactile sensor skin for curved surfaces , 2006, Proceedings 2006 IEEE International Conference on Robotics and Automation, 2006. ICRA 2006..

[20]  Mohammad A. Qasaimeh,et al.  PVDF-Based Microfabricated Tactile Sensor for Minimally Invasive Surgery , 2009, Journal of Microelectromechanical Systems.

[21]  N. Lovell,et al.  Characterization of a capacitive tactile shear sensor for application in robotic and upper limb prostheses , 2011 .

[22]  Yuhua Zhang,et al.  Sensitivity enhancement of a micro-scale biomimetic tactile sensor with epidermal ridges , 2010 .

[23]  J. Barbera,et al.  Contact mechanics , 1999 .

[24]  Zhiwei Luo,et al.  Development of the Tactile Sensor System of a Human-Interactive Robot “RI-MAN” , 2008, IEEE Transactions on Robotics.