Phase change materials (PCM) for cooling applications in buildings: A review

Cooling demand in the building sector is growing rapidly; thermal energy storage systems using phase change materials (PCM) can be a very useful way to improve the building thermal performance. The right use of PCM in the envelope can minimize peak cooling loads, allow the use of smaller HVAC technical equipment for cooling, and has the capability to keep the indoor temperature within the comfort range due to smaller indoor temperature fluctuations. This article presents an overview of different PCM applications in buildings for reducing cooling loads under different climate conditions, and the factors affecting the successful and the effective use of the PCM. Many drawbacks have been found in PCM applications, mainly the intense impact of summer weather conditions over the PCM performance, which prohibits its complete solidification during night, and thus, limiting its effectiveness during the day. Proposed solutions are reviewed in this article. Finally, a topology diagram is presented to summarize the steps leading to an effective use of PCM in building applications.

[1]  Feng Xing,et al.  Experimental assessment of position of macro encapsulated phase change material in concrete walls on indoor temperatures and humidity levels , 2014 .

[2]  Luisa F. Cabeza,et al.  Thermal analysis of a ventilated facade with PCM for cooling applications , 2013 .

[3]  Luisa F. Cabeza,et al.  Building integration of PCM for natural cooling of buildings , 2013 .

[4]  U. Stritih,et al.  Experimental investigation of energy saving in buildings with PCM cold storage , 2010 .

[5]  Esam M. Alawadhi,et al.  Building roof with conical holes containing PCM to reduce the cooling load: Numerical study , 2011 .

[6]  Giuseppe Peter Vanoli,et al.  Energy refurbishment of existing buildings through the use of phase change materials: Energy savings and indoor comfort in the cooling season , 2014 .

[7]  Zhu Neng,et al.  Experimental study and evaluation of latent heat storage in phase change materials wallboards , 2007 .

[8]  Rasmus Lund Jensen,et al.  Experimental investigation of heat transfer during night-time ventilation , 2010 .

[9]  Tadahiko Ibamoto,et al.  Research on thermal storage using rock wool phase-change material ceiling board , 2006 .

[10]  Luisa F. Cabeza,et al.  Experimental study of a ventilated facade with PCM during winter period , 2013 .

[11]  Sašo Medved,et al.  Correlation between the local climate and the free-cooling potential of latent heat storage , 2008 .

[12]  Oliver Kornadt,et al.  Temperature reduction due to the application of phase change materials , 2008 .

[13]  Takuji Nakamura,et al.  Study of a floor supply air conditioning system using granular phase change material to augment building mass thermal storage—Heat response in small scale experiments , 2006 .

[14]  Xing Jin,et al.  Thermal analysis of a double layer phase change material floor , 2011 .

[15]  Luis Pérez-Lombard,et al.  A review on buildings energy consumption information , 2008 .

[16]  Xu Xu,et al.  Modeling and simulation on the thermal performance of shape-stabilized phase change material floor used in passive solar buildings , 2005 .

[17]  Joseph Virgone,et al.  Energetic efficiency of room wall containing PCM wallboard: A full-scale experimental investigation , 2008 .

[18]  Umberto Desideri,et al.  Solar-powered cooling systems: Technical and economic analysis on industrial refrigeration and air-conditioning applications , 2009 .

[19]  Kaushik Biswas,et al.  Field thermal performance of naturally ventilated solar roof with PCM heat sink , 2012 .

[20]  Na Zhu,et al.  Dynamic characteristics and energy performance of buildings using phase change materials: A review , 2009 .

[21]  Viktoria Martin,et al.  Active free cooling optimization with thermal energy storage in Stockholm , 2012 .

[22]  Pablo Eguía,et al.  PCM in the heat rejection loops of absorption chillers. A feasibility study for the residential sector in Spain , 2014 .

[23]  Nicholas Walliman,et al.  Removing Unwanted Heat in Lightweight Buildings Using Phase Change Materials in Building Components: Simulation Modelling for PCM Plasterboard , 2007 .

[24]  Luisa F. Cabeza,et al.  Use of microencapsulated PCM in buildings and the effect of adding awnings , 2012 .

[25]  Uroš Stritih,et al.  Experimental investigation of PCM cold storage , 2009 .

[26]  Paulo Santos,et al.  Review of passive PCM latent heat thermal energy storage systems towards buildings’ energy efficiency , 2013 .

[27]  Mohamed Khayet,et al.  Experimental tile with phase change materials (PCM) for building use , 2011 .

[28]  Jay G. Sanjayan,et al.  Energy saving potential of phase change materials in major Australian cities , 2014 .

[29]  Peter Schossig,et al.  Micro-encapsulated phase-change materials integrated into construction materials , 2005 .

[30]  A. Inés Fernández,et al.  New Database on Phase Change Materials for Thermal Energy Storage in Buildings to Help PCM Selection , 2014 .

[31]  K. Nagano,et al.  Development of a ventilation system utilizing thermal energy storage for granules containing phase change material , 2004 .

[32]  Denis Bruneau,et al.  Numerical modelling of tube bundle thermal energy storage for free-cooling of buildings , 2013 .

[33]  Luisa F. Cabeza,et al.  Thermal behaviour of d-mannitol when used as PCM: Comparison of results obtained by DSC and in a thermal energy storage unit at pilot plant scale , 2013 .

[34]  A. Campos-Celador,et al.  Ventilated active façades with PCM , 2013 .

[35]  Wasim Saman,et al.  Analysis and modelling of a phase change storage system for air conditioning applications , 2001 .

[36]  Uroš Stritih,et al.  PCM thermal storage system for ‘free’ heating and cooling of buildings , 2015 .

[37]  H. Mehling,et al.  Solar heating and cooling system with absorption chiller and low temperature latent heat storage: Energetic performance and operational experience , 2009 .

[38]  Zia Ud Din,et al.  Phase change material (PCM) storage for free cooling of buildings—A review , 2013 .

[39]  Jianlei Niu,et al.  Performance of cooled-ceiling operating with MPCM slurry , 2009 .

[40]  Neil Hirst,et al.  Buildings and Climate Change , 2013 .

[41]  L. Cabeza,et al.  Heat and cold storage with PCM: An up to date introduction into basics and applications , 2008 .

[42]  Monika Woloszyn,et al.  Three-dimensional simulation with a CFD tool of the airflow phenomena in single floor double-skin facade equipped with a venetian blind , 2005 .

[43]  Luigi Marletta,et al.  Simulation of a ventilated cavity to enhance the effectiveness of PCM wallboards for summer thermal comfort in buildings , 2014 .

[44]  K. Pavlou,et al.  Recent progress on passive cooling techniques: Advanced technological developments to improve survivability levels in low-income households , 2007 .

[45]  Kamal Abdel Radi Ismail,et al.  Comparison between PCM filled glass windows and absorbing gas filled windows , 2008 .

[46]  A.L.S. Chan,et al.  Energy and environmental performance of building façades integrated with phase change material in subtropical Hong Kong , 2011 .

[47]  Luigi Marletta,et al.  A methodology for investigating the effectiveness of PCM wallboards for summer thermal comfort in buildings , 2013 .

[48]  Jiang Yi,et al.  Modeling and experimental study on an innovative passive cooling system—NVP system , 2003 .

[49]  Jonathan A. Wright,et al.  A comparison of deterministic and probabilistic optimization algorithms for nonsmooth simulation-based optimization , 2004 .

[50]  Joseph Andrew Clarke,et al.  Numerical modelling and thermal simulation of PCM–gypsum composites with ESP-r , 2004 .

[51]  Wei Xiao,et al.  Analytical optimization of interior PCM for energy storage in a lightweight passive solar room , 2009 .

[52]  Xiangfei Kong,et al.  Numerical study on the thermal performance of building wall and roof incorporating phase change material panel for passive cooling application , 2014 .

[53]  Shuo Zhang,et al.  Cooling performance of nocturnal radiative cooling combined with microencapsulated phase change material (MPCM) slurry storage , 2012 .

[54]  Dongliang Zhao,et al.  Numerical analysis of a shell-and-tube latent heat storage unit with fins for air-conditioning application , 2015 .

[55]  Piotr Łapka,et al.  Numerical modelling and experimental studies of thermal behaviour of building integrated thermal energy storage unit in a form of a ceiling panel , 2014 .

[56]  D. W. Yarbrough,et al.  Dynamic thermal performance analysis of fiber insulations containing bio-based phase change materials (PCMs) , 2012 .

[57]  Xu Liu,et al.  Experimental study on cool storage air-conditioning system with spherical capsules packed bed , 2010 .

[58]  Christine Vasiliki Konstantinidis,et al.  Integration of thermal energy storage in buildings , 2010 .

[59]  Alberto Giretti,et al.  Radiant floors integrated with PCM for indoor temperature control , 2011 .

[60]  Dongliang Zhao,et al.  Study of a thermoelectric space cooling system integrated with phase change material , 2015 .

[61]  Javier Neila,et al.  Applications of Phase Change Material in highly energy-efficient houses , 2012 .

[62]  Per Heiselberg,et al.  Review of thermal energy storage technologies based on PCM application in buildings , 2013 .

[63]  Adeel Waqas,et al.  Thermal performance of latent heat storage for free cooling of buildings in a dry and hot climate: A , 2011 .

[64]  Dong Chen,et al.  Global warming and its implication to emission reduction strategies for residential buildings , 2011 .

[65]  Amar M. Khudhair,et al.  A review on phase change energy storage: materials and applications , 2004 .

[66]  H. Weinlaeder,et al.  Monitoring results of an interior sun protection system with integrated latent heat storage , 2011 .

[67]  Mohammed M. Farid,et al.  A Review on Energy Conservation in Building Applications with Thermal Storage by Latent Heat Using Phase Change Materials , 2021, Thermal Energy Storage with Phase Change Materials.

[68]  S. M. Hasnain.  Review on sustainable thermal energy storage technologies, Part I: heat storage materials and techniques , 1998 .

[69]  Arild Gustavsen,et al.  Phase Change Materials for Building Applications: A State-of-the-Art Review , 2010 .

[70]  Robert F. Boehm,et al.  Modeling of phase change material peak load shifting , 2007 .

[71]  Bjørn Petter Jelle,et al.  Phase Change Materials and Products for Building Applications: A State-of-the-Art Review and Future Research Opportunities , 2015 .

[72]  Nattaporn Chaiyat,et al.  Energy and economic analysis of a building air-conditioner with a phase change material (PCM) , 2015 .

[73]  Joseph Virgone,et al.  Modeling and simulation of a phase change material system for improving summer comfort in domestic residence , 2015 .

[74]  Xin Wang,et al.  A new method to estimate optimal phase change material characteristics in a passive solar room , 2011 .

[75]  Hans-Martin Henning,et al.  Solar assisted air conditioning of buildings – an overview , 2004 .

[76]  Wasim Saman,et al.  Thermal performance of PCM thermal storage unit for a roof integrated solar heating system , 2005 .

[77]  M. Fesanghary,et al.  Design of low-emission and energy-efficient residential buildings using a multi-objective optimization algorithm , 2012 .

[78]  Valentina Serra,et al.  Improving thermal comfort conditions by means of PCM glazing systems , 2013 .

[79]  Mats Westermark,et al.  Phase change material cool storage for a Swedish Passive House , 2011 .

[80]  Ursula Eicker,et al.  Cooling strategies, summer comfort and energy performance of a rehabilitated passive standard office building , 2010 .

[81]  V. Tyagi,et al.  Thermal cycle testing of calcium chloride hexahydrate as a possible PCM for latent heat storage , 2008 .

[82]  Xiaoqin Sun,et al.  Energy and economic analysis of a building enclosure outfitted with a phase change material board (PCMB) , 2014 .

[83]  Ian Paul Knight,et al.  The use of phase change material (PCM) to improve the coefficient of perform - ance of a chiller for meeting domestic cooling in Wales , 2007 .

[84]  Frédéric Kuznik,et al.  A review on phase change materials integrated in building walls , 2011 .

[85]  Karthik Panchabikesan,et al.  Review on phase change material based free cooling of buildings—The way toward sustainability , 2015 .

[86]  Dan Zhou,et al.  Review on thermal energy storage with phase change materials (PCMs) in building applications , 2012 .

[87]  K. Peippo,et al.  An organic PCM storage system with adjustable melting temperature , 1991 .

[88]  D. Feldman,et al.  Full scale thermal testing of latent heat storage in wallboard , 1996 .

[89]  Luisa F. Cabeza,et al.  Use of microencapsulated PCM in concrete walls for energy savings , 2007 .

[90]  Zhiqiang Zhai,et al.  Modeling phase change materials embedded in building enclosure: A review , 2013 .

[91]  Luisa F. Cabeza,et al.  Energy performance of a ventilated double skin facade with PCM under different climates , 2015 .

[92]  Stephen Sharples,et al.  The potential of phase change materials to reduce domestic cooling energy loads for current and future UK climates , 2015 .

[93]  K. Peippo,et al.  A multicomponent PCM wall optimized for passive solar heating , 1991 .

[94]  R. Velraj,et al.  Review on free cooling of buildings using phase change materials , 2010 .

[95]  Maciej Jaworski,et al.  Thermal performance of building element containing phase change material (PCM) integrated with ventilation system – An experimental study , 2014 .

[96]  Joseph Virgone,et al.  In-situ study of thermal comfort enhancement in a renovated building equipped with phase change material wallboard , 2011 .

[97]  Marc A. Rosen,et al.  Thermal performance of a multiple PCM thermal storage unit for free cooling , 2013 .

[98]  M. A. Medina,et al.  Assessing the integration of a thin phase change material (PCM) layer in a residential building wall for heat transfer reduction and management , 2015 .

[99]  Shazim Ali Memon,et al.  Phase change materials integrated in building walls: A state of the art review , 2014 .

[100]  Xin Wang,et al.  Numerical analysis of effect of shape-stabilized phase change material plates in a building combined with night ventilation , 2009 .

[101]  V. V. Tyagi,et al.  PCM thermal storage in buildings: A state of art , 2007 .

[102]  Nasrudin Abd Rahim,et al.  Review of PCM based cooling technologies for buildings , 2012 .

[103]  Chengbin Zhang,et al.  Thermal response of brick wall filled with phase change materials (PCM) under fluctuating outdoor te , 2011 .

[104]  Sašo Medved,et al.  Efficiency of free cooling using latent heat storage integrated into the ventilation system of a low energy building , 2007 .

[105]  Esam M. Alawadhi,et al.  Using phase change materials in window shutter to reduce the solar heat gain , 2012 .

[106]  Andreas K. Athienitis,et al.  Investigation of the Thermal Performance of a Passive Solar Test-Room with Wall Latent Heat Storage , 1997 .

[107]  A. Lázaro,et al.  PCM–air heat exchangers for free-cooling applications in buildings: Experimental results of two real-scale prototypes , 2009 .

[108]  L. Cabeza,et al.  Free-cooling of buildings with phase change materials , 2004 .

[109]  Jan Kośny,et al.  PCM-Enhanced Building Components , 2015 .

[110]  B. Rudolf,et al.  World Map of the Köppen-Geiger climate classification updated , 2006 .

[111]  Yongsheng Lian,et al.  Numerical simulation of phase change material composite wallboard in a multi-layered building envelope , 2012 .

[112]  Ala Hasan,et al.  Minimisation of life cycle cost of a detached house using combined simulation and optimisation , 2008 .

[113]  Beat Lehmann,et al.  Development of a thermally activated ceiling panel with PCM for application in lightweight and retrofitted buildings , 2004 .

[114]  Luisa F. Cabeza,et al.  Experimental analysis of hydroquinone used as phase change material (PCM) to be applied in solar cooling refrigeration. , 2012 .

[115]  Martin Belusko,et al.  Minimising energy usage for domestic cooling with off-peak PCM storage , 2014 .

[116]  Motoi Yamaha,et al.  The Evaluation of Peak Shaving by a Thermal Storage System Using Phase-Change Materials in Air Distribution Systems , 2006 .

[117]  D. A. Neeper,et al.  Thermal dynamics of wallboard with latent heat storage , 2000 .

[118]  H. Brouwers,et al.  Experimental research on the use of micro-encapsulated Phase Change Materials to store solar energy in concrete floors and to save energy in Dutch houses , 2011 .

[119]  Luisa F. Cabeza,et al.  Experimental analysis of the effectiveness of a high temperature thermal storage tank for solar cooling applications , 2013 .

[120]  Luisa F. Cabeza,et al.  Experimental study of using PCM in brick constructive solutions for passive cooling , 2010 .

[121]  R. Velraj,et al.  Effect of double layer phase change material in building roof for year round thermal management , 2008 .

[122]  Paulo Santos,et al.  Multi-dimensional optimization of the incorporation of PCM-drywalls in lightweight steel-framed residential buildings in different climates , 2014 .

[123]  M. H. Mahfuz,et al.  Cooling of air using heptadecane phase change material in shell and tube arrangement: Analytical and experimental study , 2014 .

[124]  Luis C. Dias,et al.  A multi-objective optimization model for building retrofit strategies using TRNSYS simulations, GenOpt and MATLAB , 2012 .

[125]  Saeed Kamali,et al.  Review of free cooling system using phase change material for building , 2014 .

[126]  Luisa F. Cabeza,et al.  Materials used as PCM in thermal energy storage in buildings: A review , 2011 .

[127]  Dorel Feldman,et al.  Latent heat storage in building materials , 1993 .

[128]  Laurent Royon,et al.  Thermal energy storage and release of a new component with PCM for integration in floors for thermal management of buildings , 2013 .

[129]  Adeel Waqas,et al.  Utilization of Latent Heat Storage Unit for Comfort Ventilation of Buildings in Hot and Dry Climates , 2011 .

[130]  S. Hiebler,et al.  Solar Heating and Cooling System with Absorption Chiller and Latent Heat Storage – A Research Project Summary☆ , 2014 .

[131]  Marc A. Rosen,et al.  Thermal performance optimization of free cooling systems using enhanced latent heat thermal storage unit , 2013 .

[132]  Francesco Fiorito.  Phase-change materials for indoor comfort improvement in lightweight buildings. A parametric analysis for Australian climates , 2014 .

[133]  Hongfa Di,et al.  Application of latent heat thermal energy storage in buildings: State-of-the-art and outlook , 2007 .

[134]  Germán Ferreira,et al.  Phase change material applications in buildings: an environmental assessment for some Spanish climate severities. , 2013, The Science of the total environment.

[135]  Zhang Zhibin,et al.  Microencapsulation of butyl stearate as a phase change material by interfacial polycondensation in a polyurea system , 2009 .

[136]  David Reay,et al.  Novel ventilation system for reducing air conditioning in buildings. Part II: testing of prototype , 2001 .

[137]  F. L. Tan,et al.  Numerical investigation of free-cooling system using plate type PCM storage , 2013 .

[138]  Jianlei Niu,et al.  Raising evaporative cooling potentials using combined cooled ceiling and mPCM slurry storage , 2008 .