Modified response surface method basis harmony search to predict the burst pressure of corroded pipelines

[1]  Peng Hao,et al.  Enriched self-adjusted performance measure approach for reliability-based design optimization of complex engineering problems , 2018 .

[2]  Peng Hao,et al.  Enhanced single-loop method for efficient reliability-based design optimization with complex constraints , 2018 .

[3]  Ozgur Kisi,et al.  Comparison of four heuristic regression techniques in solar radiation modeling: Kriging method vs RSM, MARS and M5 model tree , 2018 .

[4]  Salim Heddam,et al.  Modeling daily dissolved oxygen concentration using modified response surface method and artificial neural network: a comparative study , 2017, Neural Computing and Applications.

[5]  Kui Xu,et al.  Probabilistic analysis of corroded pipelines based on a new failure pressure model , 2017 .

[6]  Faisal Khan,et al.  Revised burst model for pipeline integrity assessment , 2017 .

[7]  Ahmed El-Shafie,et al.  Harmonize input selection for sediment transport prediction , 2017 .

[8]  Peng Hao,et al.  An efficient adaptive-loop method for non-probabilistic reliability-based design optimization , 2017 .

[9]  Peng Hao,et al.  Optimum design of aircraft panels based on adaptive dynamic harmony search , 2017 .

[10]  Xiao Tian,et al.  Failure pressure of medium and high strength pipelines with scratched dent defects , 2017 .

[11]  Jianxing Yu,et al.  Effect of axial length parameters of ovality on the collapse pressure of offshore pipelines , 2017 .

[12]  Hieu Chi Phan,et al.  Revisiting burst pressure models for corroded pipelines , 2017 .

[13]  Aliakbar Gholampour,et al.  Modeling the behavior of FRP-confined concrete using dynamic harmony search algorithm , 2017, Engineering with Computers.

[14]  Mechri Abdel Ghani,et al.  Determination of Limit Load Solution for the Remaining Load-Carrying Capacity of Corroded Pipelines , 2016 .

[15]  Wenxing Zhou,et al.  Statistical analyses of incidents on onshore gas transmission pipelines based on PHMSA database , 2016 .

[16]  Helio da Cunha Bisaggio,et al.  Probabilistic Analysis of the Collapse Pressure of Corroded Pipelines , 2016 .

[17]  Z. M. Xiao,et al.  Failure assessment on offshore girth welded pipelines due to corrosion defects , 2016 .

[18]  Xin Li,et al.  Failure pressure analysis of corroded moderate-to-high strength pipelines , 2016 .

[19]  Bo Wang,et al.  Efficient Optimization of Cylindrical Stiffened Shells with Reinforced Cutouts by Curvilinear Stiffeners , 2016 .

[20]  Woo-Sik Kim,et al.  Integrity assessment of a corroded API X70 pipe with a single defect by burst pressure analysis , 2015 .

[21]  Steven Li,et al.  Improved novel global harmony search with a new relaxation method for reliability optimization problems , 2015, Inf. Sci..

[22]  Xin Li,et al.  Failure analysis of high strength pipeline with single and multiple corrosions , 2015 .

[23]  B. Keshtegar,et al.  Reliability analysis of corroded pipes using conjugate HL–RF algorithm based on average shear stress yield criterion , 2014 .

[24]  Naiyu Wang,et al.  Evaluating Fitness-for-Service of Corroded Metal Pipelines: Structural Reliability Bases , 2014 .

[25]  J. E. Abdalla Filho,et al.  On the failure pressure of pipelines containing wall reduction and isolated pit corrosion defects , 2014 .

[26]  Bo Wang,et al.  Surrogate-based optimization of stiffened shells including load-carrying capacity and imperfection sensitivity , 2013 .

[27]  Bin Ma,et al.  Assessment on failure pressure of high strength pipeline with corrosion defects , 2013 .

[28]  Bo Wang,et al.  Surrogate-Based Optimum Design for Stiffened Shells with Adaptive Sampling , 2012 .

[29]  T. Meshii,et al.  Influence of circumferential flaw length on internal burst pressure of a wall-thinned pipe , 2012 .

[30]  Brian N. Leis,et al.  Evaluation of burst pressure prediction models for line pipes , 2012 .

[31]  Y. F. Cheng,et al.  Reliability and failure pressure prediction of various grades of pipeline steel in the presence of corrosion defects and pre-strain , 2012 .

[32]  Z. A. Majid,et al.  Experimental and computational failure analysis of natural gas pipe , 2012 .

[33]  R. Mohsin,et al.  Failure analysis of natural gas pipes , 2010 .

[34]  Theodoro A. Netto,et al.  A simple procedure for the prediction of the collapse pressure of pipelines with narrow and long corrosion defects — Correlation with new experimental data , 2010 .

[35]  Pieter van Gelder,et al.  A Review And Probabilistic Analysis of Limit State Functions of Corroded Pipelines , 2010 .

[36]  Roberto Lacalle,et al.  Assessment of local thin areas in a marine pipeline by using the FITNET FFS corrosion module , 2009 .

[37]  Claudio Ruggieri,et al.  Failure assessments of corroded pipelines with axial defects using stress-based criteria: Numerical studies and verification analyses , 2009 .

[38]  S. O. Degertekin.  Optimum design of steel frames using harmony search algorithm , 2008 .

[39]  C. Guedes Soares,et al.  Reliability of pipelines with corrosion defects , 2008 .

[40]  A. C. Benjamin,et al.  Burst Tests on Pipeline Containing Irregular Shaped Corrosion Defects , 2008 .

[41]  M. Koçak,et al.  EUROPEAN FITNESS-FOR-SERVICE PROCEDURE FITNET AND ITS APPLICATION TO WELDED AEROSPACE STRUCTURES , 2008 .

[42]  C.R.F. Azevedo,et al.  Failure analysis of a crude oil pipeline , 2007 .

[43]  Jong-Hyun Baek,et al.  Ductile failure analysis of API X65 pipes with notch-type defects using a local fracture criterion , 2007 .

[44]  A. C. Benjamin,et al.  Part 4: Rupture tests of pipeline segments containing long real corrosion defects , 2007 .

[45]  A. C. Benjamin,et al.  Part 3: Burst tests of pipeline with extensive longitudinal metal loss , 2006 .

[46]  K. Lee,et al.  A new meta-heuristic algorithm for continuous engineering optimization: harmony search theory and practice , 2005 .

[47]  A. Sinatora,et al.  Failure analysis of a gas pipeline , 2004 .

[48]  Woo-Sik Kim,et al.  The Evaluation of Failure Pressure for Corrosion Defects Within Girth or Seam Weld in Transmission Pipelines , 2004 .

[49]  Yunmin Kim,et al.  Development of limit load solutions for corroded gas pipelines , 2003 .

[50]  Zong Woo Geem,et al.  Harmony Search Optimization: Application to Pipe Network Design , 2002 .

[51]  Francisco Caleyo,et al.  A study on the reliability assessment methodology for pipelines with active corrosion defects , 2002 .

[52]  G. Mannucci,et al.  Fracture properties of API X 100 gas pipeline steels , 2002 .

[53]  Zong Woo Geem,et al.  A New Heuristic Optimization Algorithm: Harmony Search , 2001, Simul..

[54]  A. C. Benjamin,et al.  Burst Tests on Pipeline With Long External Corrosion , 2000 .

[55]  Brian N. Leis,et al.  Development of an alternative failure criterion for residual strength of corrosion defects in moderate- to high-toughness pipe. Final report , 1999 .

[56]  Petar Agatonovic.  Development of residual strength evaluation tool based on stress-strain approximation , 1997 .

[57]  R. J. Pick,et al.  Behaviour of longitudinally aligned corrosion pits , 1996 .

[58]  R. J. Pick,et al.  Behaviour of circumferentially aligned corrosion pits , 1994 .

[59]  R. J. Pick,et al.  Bursting of line pipe with long external corrosion , 1991 .

[60]  J F Kiefner,et al.  EVALUATING PIPE--1. NEW METHOD CORRECTS CRITERION FOR EVALUATING CORRODED PIPE , 1990 .

[61]  A. G. Miller,et al.  Review of limit loads of structures containing defects , 1988 .

[62]  R. Steinbuch,et al.  Critical crack sizes in ductile piping , 1981 .

[63]  E. Bodmann,et al.  Fracture mechanics analysis on the initiation and propagation of circumferential and longitudinal cracks in straight pipes and pipe bends , 1980 .