High precision control design for SGCMG gimbal servo system

Single gimbal control moment gyroscope (SGCMG) is used as the actuator of attitude control system for modern satellites. High precision control of the SGCMG gimbal servo system is difficult to achieve because of the existing multi-source and strong coupling disturbances. In this paper, multi-source disturbances are modeling, meanwhile, a high precision controller is designed, including a variable structure controller (VSC) and an adaptive feedforward controller (AFC). VSC guarantees steadiness and robustness of the system utilizing its characteristics of invariance and robustness, and AFC specially compensates the high frequency disturbances created by unbalance and vibration of the high speed rotor, utilizing its characteristics of adaptive close-loop regulation. Simulation results show that the proposed method attenuates the multi-source and strong coupling disturbances more efficient comparing to the existing methods, and can achieve high precision control.

[1]  李海涛 Li Hai-tao,et al.  Modeling and compensation of nonlinear friction in harmonic driver , 2011 .

[2]  高印寒 Gao Yin-han,et al.  Prediction of variation of inductive crosstalk in the automotive cable bundles , 2011 .

[3]  Xiang Li,et al.  Attenuation of wide margin disturbance fluctuation in SGCMG gimbal servo system , 2012, 2012 15th International Conference on Electrical Machines and Systems (ICEMS).

[4]  Wei Zheng,et al.  Ultra-low speed control strategy for SGCMG gimbal servo system , 2014, The 26th Chinese Control and Decision Conference (2014 CCDC).

[5]  Ioan Doré Landau,et al.  A general adaptive feedforward compensation algorithm for active vibration control with mechanical coupling and local feedback , 2014, 22nd Mediterranean Conference on Control and Automation.

[6]  Luca Zaccarian,et al.  Position Regulation of an EGR Valve Using Reset Control With Adaptive Feedforward , 2014, IEEE Transactions on Control Systems Technology.

[7]  Gang Li,et al.  Design of SGCMG and long life rotor bearing system technology in Tiangong-1 , 2014 .

[8]  Wei Zheng,et al.  High frequency disturbance torque control strategy for SGCMG gimbal servo system , 2014, Proceedings of the 33rd Chinese Control Conference.

[9]  Spilios D. Fassois,et al.  Friction Identification Based Upon the LuGre and Maxwell Slip Models , 2009, IEEE Transactions on Control Systems Technology.

[10]  Takenori Atsumi,et al.  Optimization of adaptive feedforward repeatable run-out cancellation for positioning control system of hard disk drives , 2012 .

[11]  Min Xiang,et al.  Autobalancing of high-speed rotors suspended by magnetic bearings using LMS adaptive feedforward compensation , 2014 .

[12]  Gao Yanan.  Gimbal Control Technique and Gimbal Rate Measurement Method for the Control Moment Gyro , 2008 .

[13]  Hongbo Zhang,et al.  A Novel Adaptive Feedforward Compensation Algorithm for Hard Disk Drive , 2006, 2006 International Conference on Mechatronics and Automation.