Numerical study on development of particle concentration profiles in a curved microchannel

The functional section of a microseparator/classifier is a semicircular microchannel whose downstream end bifurcates to separate/classify the particles in a slurry [Ookawara, S., Higashi, R., Street, D., Ogawa, K., 2004a. Feasibility study on concentration of slurry and classification of contained articles by microchannel. Chemical Engineering Journal 101, 171–178 and Ookawara, S., Higashi, R., Street, D., Ogawa, K., 2004b. The Influence of channel depth on the performance of a microseparator/classifier. Kagaku Kougaku Ronbunshu 30, 135–141.]. Previous numerical studies, based on an Eulerian–Eulerian approach, showed how the particle lift force was an indispensable factor for the separation/classification [Ookawara, S., Street, D., Ogawa, K., 2004c. A practical application of the Euler-granular model to a microseparator/classifier. In: Proceedings of the Fifth International Conference on Multiphase Flow, CD-ROM, #206.]. The present numerical study, by consistently employing the Eulerian–Eulerian approach, extensively examines the development of particle concentration profiles and the effects of feed concentration at various cross-sections in a curved microchannel for De = 30(Re = 450). The necessary arc length for particle concentration profiles to be fully established increases with the decreasing particle size. Particles become most concentrated at the centers of secondary Dean vortices. The dimensions of concentration region depend on the particle size and the feed concentration. In spite of the small particle relaxation time in water and the laminar flow nature, steep shear rates in a microchannel cause a collision interval comparable to the relaxation time of the particles that can be separated. To characterize the effect a newly defined Stokes number is based on the shear-induced particle–particle collisions in liquid laminar flow. A concentration efficiency is also defined as the normalized ratio of the maximum concentration to the feed concentration and it is approximately 1.0 below a Stokes number of 0.1. However, beyond the Stokes number of 0.1 the concentration efficiency decreases linearly as the log of the Stokes number increases independently of the particle size. This is because the particle to particles collision in a concentrated slurry adversely influences the efficiency of the separator. 2006 Elsevier Ltd. All rights reserved.

[1]  S. G. Mason,et al.  Particle motions in sheared suspensions. II. Collisions of uniform spheres , 1952 .

[2]  Steffen Hardt,et al.  Helical Flows and Chaotic Mixing in Curved Micro Channels , 2004 .

[3]  D. Gidaspow,et al.  Hydrodynamics of circulating fluidized beds: Kinetic theory approach , 1991 .

[4]  Daniel T. Chiu,et al.  Microfluidic systems: High radial acceleration in microvortices , 2003, Nature.

[5]  E. A. Foumeny,et al.  The influence of reynolds number on the entry length and pressure drop for laminar pipe flow , 1993 .

[6]  B. Finlayson,et al.  Quantitative analysis of molecular interaction in a microfluidic channel: the T-sensor. , 1999, Analytical chemistry.

[7]  D. Jeffrey,et al.  Kinetic theories for granular flow: inelastic particles in Couette flow and slightly inelastic particles in a general flowfield , 1984, Journal of Fluid Mechanics.

[8]  S. Ookawara,et al.  Applicability of the Dilatancy Model to Suspensions in Shear-thinning Medium , 2003 .

[9]  T. Kajishima,et al.  Large-eddy simulation of turbulent gas–particle flow in a vertical channel: effect of considering inter-particle collisions , 2001, Journal of Fluid Mechanics.

[10]  John Garside,et al.  Velocity-Voidage Relationships for Fluidization and Sedimentation in Solid-Liquid Systems , 1977 .

[11]  Steffen Hardt,et al.  Simulation of helical flows in microchannels , 2004 .

[12]  P. Saffman.  The lift on a small sphere in a slow shear flow , 1965, Journal of Fluid Mechanics.

[13]  Yoshiko Yamaguchi,et al.  3-D Simulation and Visualization of Laminar Flow in a Microchannel with Hair-Pin Curves , 2004 .

[14]  S. Ogawa,et al.  On the equations of fully fluidized granular materials , 1980 .

[15]  Dafydd Gibbon,et al.  1 User’s guide , 1998 .

[16]  S. Ookawara,et al.  Dilutant flow characteristics model of coarse particle suspensions with uniform size distribution , 2003 .

[17]  Syamlal.  A review of granular stress constitutive relations , 1987 .

[18]  Kohei Ogawa,et al.  Feasibility study on concentration of slurry and classification of contained particles by microchannel , 2004 .

[19]  M. Syamlal,et al.  MFIX documentation theory guide , 1993 .

[20]  J. Sturm,et al.  Continuous Particle Separation Through Deterministic Lateral Displacement , 2004, Science.

[21]  Stability of Interface between Two Liquids in T-shape Confluence of Microchannels , 2004 .