Theoretical and experimental study of heat transfer through a vertical partitioned enclosure: Application to the optimization of the thermal resistance

Enclosures divided by multiple vertical diffusive partitions have high insulating qualities and may provide tangible benefits as a construction material. In this study, we have developed one-dimensional analytical model of coupled heat transfer (conduction, convection, radiation) in such enclosures. This model is numerically and experimentally validated for an important number of configurations and size of alveolus. The variation of the thermal resistance versus the number of partitions has been experimentally validated. The model is then used to find the partitions number that maximizes the thermal resistance of a partitioned enclosure. Effects of thermal and geometrical parameters on the maximal thermal resistance of the partitioned enclosure have been also investigated. We have shown that the thermal resistance could be improved by decreasing the thermal conductivity of walls; decreasing the emissivity of the partitions faces; or using very thin partitions. The use of relatively thick exterior vertical walls marginally degrades the optimal thermal resistance while at the same time increases the thermal inertia. The combination of the different parameters gives a set of solutions when one desires to obtain precise characteristics for an insulating envelope. The presented model can help to determine the most suitable combination of parameters allowing to get the desired maximal thermal resistance.

[1]  Ching-Jenq Ho,et al.  Conjugate natural convection heat transfer in an air-filled rectangular cavity , 1987 .

[2]  Adrian Bejan,et al.  Heat transfer through single and double vertical walls in natural convection: Theory and experiment , 1981 .

[3]  Abdelhalim Abdelbaki,et al.  Simulation nume´rique des transferts thermiques couple´sa`travers les parois alve´olaires des baˆtiments , 1999 .

[4]  Bruno Lacarrière.  Etude numérique et expérimentale des échanges thermiques en cavités partitionnées : application aux transferts instationnaires dans les briques à perforations verticales , 2003 .

[5]  K. A. Antonopoulos,et al.  On the dynamic thermal behaviour of indoor spaces , 2001 .

[6]  Françoise Monchoux,et al.  Numerical study of heat transfer in a wall of vertically perforated bricks: influence of assembly method , 2003 .

[7]  Kuan-chao Chen,et al.  Natural convection in an air layer enclosed within rectangular cavities , 1978 .

[8]  I. Catton,et al.  NATURAL CONVECTION IN ENCLOSURES , 1978 .

[9]  A. Bejan.  Convection Heat Transfer , 1984 .

[10]  Hasmet Turkoglu,et al.  Natural convection heat transfer in enclosures with conducting multiple partitions and side walls , 1996 .

[11]  T. W. Tong,et al.  Natural convection in partitioned air-filled rectangular enclosures , 1986 .

[12]  G. Batchelor,et al.  Heat transfer by free convection across a closed cavity between vertical boundaries at different temperatures , 1954 .

[13]  Nishimura Tatsuo,et al.  Natural convection heat transfer in enclosures with an off-center partition , 1987 .

[14]  Hong Wang,et al.  Étude numérique du couplage de la convection naturelle avec le rayonnement de surfaces en cavité carrée remplie d'air , 2006 .

[15]  G. Colomer,et al.  Three-dimensional numerical simulation of convection and radiation in a differentially heated cavity using the discrete ordinates method , 2004 .

[16]  Yuji Kawamura,et al.  Natural convection heat transfer in enclosures with multiple vertical partitions , 1988 .

[17]  S. Ostrach.  Natural convection in enclosures , 1988 .

[18]  E. Bilgen,et al.  Natural convection and conduction in enclosures with multiple vertical partitions , 1991 .