Stability analysis and optimization of the support system of an underground powerhouse cavern considering rock mass variability

Input parameters, such as rock mass strength parameters and deformation modulus, considered in the design of underground openings involve some uncertainty. The current uncertainty in these parameters is due to the inherent variability of these parameters. To quantify these parameters and design underground openings, the statistical methods must be utilized. In this research, a statistical method was used to define the GSI of rock mass (Geological Strength Index), block volume (Vb), and joint conditions (Jc). Using the GSI distribution function obtained from field data and intact rock strength characteristics, the statistical distribution functions of rock mass parameters were defined using the Monte Carlo method. The statistical analysis of the stability in Azad-pumped storage powerhouse cavern was carried out through the point estimate method. The appropriate support system was suggested according to the support pressure and the plastic zone around the cavern. This study showed the application of the statistical method, by combining the uncertainties of the intact rock strength and discontinuity parameters, in the assessment of the strength and deformability of rock masses and the support selection process in comparison with the deterministic methods.

[1]  Howard K. Shmuck.  Theory And Practice Of Rock Bolting , 1957 .

[2]  Mehmet Sari,et al.  The stochastic assessment of strength and deformability characteristics for a pyroclastic rock mass , 2009 .

[3]  Nick Barton,et al.  Estimation Of Support Requirements For Underground Excavations , 1975 .

[4]  E. Hoek,et al.  Empirical estimation of rock mass modulus , 2006 .

[5]  A. Karakas.  Practical Rock Engineering , 2008 .

[6]  Evert Hoek,et al.  HOEK-BROWN FAILURE CRITERION - 2002 EDITION , 2002 .

[7]  P. K. Kaiser,et al.  Support of underground excavations in hard rock , 1995 .

[8]  W. Weibull.  A statistical theory of the strength of materials , 1939 .

[9]  M. Cacas,et al.  Distribution of joints: probabilistic modelling and case study near Cardiff (Wales, U.K.) , 1997 .

[10]  Mehmet Sari,et al.  Estimating rock mass properties using Monte Carlo simulation: Ankara andesites , 2010, Comput. Geosci..

[11]  Margaret V. Wen,et al.  Two-Dimensional Stability Assessment of Rock Slopes Based on Random Field , 2017 .

[12]  H. Gao,et al.  Probabilistic approaches to estimating variation in the mechanical properties of rock masses , 1995 .

[13]  Evert Hoek,et al.  Quantification of the Geological Strength Index Chart , 2013 .

[14]  Nick Barton,et al.  Engineering classification of rock masses for the design of tunnel support , 1974 .

[15]  E. Hoek,et al.  Predicting tunnel squeezing problems in weak heterogeneous rock masses , 2000 .

[16]  Lianyang Zhang,et al.  Estimating the Mean Trace Length of Rock Discontinuities , 1998 .

[17]  John Hadjigeorgiou,et al.  Discontinuity trace map construction using photographs of rock exposures , 2003 .

[18]  Erling Nordlund,et al.  The probabilistic estimation of rock masses properties in Malmberget mine, Sweden , 2013 .

[19]  Emilio Rosenblueth,et al.  Two-point estimates in probabilities , 1981 .

[20]  Bak Kong Low,et al.  Probabilistic evaluation of ground-support interaction for deep rock excavation using artificial neural network and uniform design , 2012 .

[21]  M. Harr.  Probabilistic estimates for multivariate analyses , 1989 .

[22]  Roberto W. Romeo,et al.  Probability of Failure Occurrence and Recurrence in Rock Slopes Stability Analysis , 2003 .

[23]  Jun Zheng,et al.  Improved Probabilistic Kinematic Analysis Procedure Based on Finite Size Discontinuities and Its Application to a Rock Slope at Open Pit Mine in U.S. , 2017 .

[24]  G. Morelli,et al.  Variability of the GSI Index Estimated From Different Quantitative Methods , 2015, Geotechnical and Geological Engineering.

[25]  Resat Ulusay,et al.  Modifications to the geological strength index (GSI) and their applicability to stability of slopes , 1999 .

[26]  G. Escadeillas,et al.  The relationship between joint aperture, spacing distribution, vertical dimension and carbonate stratification: An example from the Kimmeridgian limestones of Pointe-du-Chay (France) , 2007 .

[27]  T. Engelder,et al.  Investigating the effect of mechanical discontinuities on joint spacing , 1998 .

[28]  G. Babu,et al.  Analysis of Tunnel Support Requirements Using Deterministic and Probabilistic Approaches in Average Quality Rock Mass , 2018 .

[29]  Gregory B. Baecher,et al.  Probabilistic and statistical methods in engineering geology , 1983 .

[30]  E. Hoek.  Reliability of Hoek-Brown estimates of rock mass properties and their impact on design , 1998 .

[31]  P. K. Kaiser,et al.  Estimation of rock mass deformation modulus and strength of jointed hard rock masses using the GSI system , 2004 .

[32]  André T. Beck,et al.  Reliability analyses of underground openings with the point estimate method , 2017 .

[33]  Ming Cai,et al.  Rock Mass Characterization and Rock Property Variability Considerations for Tunnel and Cavern Design , 2011 .

[34]  G. Simpson.  Synmetamorphic vein spacing distributions: characterisation and origin of a distribution of veins from NW Sardinia, Italy , 2000 .