A Resonant Switched-Capacitor IC and Embedded System for Sub-Module Photovoltaic Power Management

The viability of grid-connected photovoltaic (PV) energy has improved dramatically in recent years: large increases in manufacturing capacity have driven reductions in cost and higher efficiencies, improving lifetime cost of energy (LCOE). Mismatch loss remains an important consideration in PV systems and a range of power electronic solutions have been proposed to recover losses due to shading, dust/debris, factory mismatch and aging. This paper presents a high-voltage CMOS IC and embedded system based on a resonant switched-capacitor converter. The solution is integrated into the junction box to balance power flow in parallel with sub-module strings of PV cells. A custom dual-core cable and connector extend the balancing function to multiple PV modules connected in series, improving energy production of large-scale PV arrays in the case of shading or mismatch. The converter is based on a resonant switched-capacitor (ReSC) topology that achieves effective conversion efficiency over 99% for a wide range of mismatch, insertion loss below 0.1%, a vertical footprint less than 6 mm, and weight less than 1 Oz.

[1]  Ali Hajimiri,et al.  The class-E/F family of ZVS switching amplifiers , 2003 .

[2]  Philip T. Krein,et al.  Switched capacitor system for automatic series battery equalization , 1997, Proceedings of APEC 97 - Applied Power Electronics Conference.

[3]  Robert W. Erickson,et al.  Improved Energy Capture in Series String Photovoltaics via Smart Distributed Power Electronics , 2009, 2009 Twenty-Fourth Annual IEEE Applied Power Electronics Conference and Exposition.

[4]  Toshihisa Shimizu,et al.  Generation control circuit for photovoltaic modules , 2001 .

[5]  M. S. Makowski,et al.  Performance limits of switched-capacitor DC-DC converters , 1995, Proceedings of PESC '95 - Power Electronics Specialist Conference.

[6]  K. Kesarwani,et al.  A comparative theoretical analysis of distributed ladder converters for sub-module PV energy optimization , 2012, 2012 IEEE 13th Workshop on Control and Modeling for Power Electronics (COMPEL).

[7]  F. Blaabjerg,et al.  A review of single-phase grid-connected inverters for photovoltaic modules , 2005, IEEE Transactions on Industry Applications.

[8]  Chung-Yuen Won,et al.  Interleaved Soft-Switching Boost Converter for Photovoltaic Power-Generation System , 2011, IEEE Transactions on Power Electronics.

[9]  Geoffrey R. Walker,et al.  Cascaded DC-DC converter connection of photovoltaic modules , 2004 .

[10]  Henk Jan Bergveld,et al.  Module-Level DC/DC Conversion for Photovoltaic Systems: The Delta-Conversion Concept , 2013, IEEE Transactions on Power Electronics.

[11]  P. T. Krein,et al.  Photovoltaic differential power converter trade-offs as a consequence of panel variation , 2012, 2012 IEEE 13th Workshop on Control and Modeling for Power Electronics (COMPEL).

[12]  G.R. Walker,et al.  Cascaded DC-DC converter connection of photovoltaic modules , 2004, 2002 IEEE 33rd Annual IEEE Power Electronics Specialists Conference. Proceedings (Cat. No.02CH37289).

[13]  P. T. Krein,et al.  Comparative analysis of differential power conversion architectures and controls for solar photovoltaics , 2012, 2012 IEEE 13th Workshop on Control and Modeling for Power Electronics (COMPEL).

[14]  P.L. Chapman,et al.  Power Electronics Needs for Achieving Grid-Parity Solar Energy Costs , 2008, 2008 IEEE Energy 2030 Conference.

[15]  S.R. Sanders,et al.  Analysis and Optimization of Switched-Capacitor DC–DC Converters , 2008, IEEE Transactions on Power Electronics.

[16]  Jennifer Franz-Vasdeki.  Energy: A carbon-free future? , 2011 .

[17]  A. Reis,et al.  Comparison of PV module performance before and after 11-years of field exposure , 2002, Conference Record of the Twenty-Ninth IEEE Photovoltaic Specialists Conference, 2002..

[18]  Michael D. Seeman,et al.  A 32nm fully integrated reconfigurable switched-capacitor DC-DC converter delivering 0.55W/mm2 at 81% efficiency , 2010, 2010 IEEE International Solid-State Circuits Conference - (ISSCC).

[19]  G. Champenois,et al.  Nondissipative String Current Diverter for Solving the Cascaded DC–DC Converter Connection Problem in Photovoltaic Power Generation System , 2012, IEEE transactions on power electronics.

[20]  Charles R. Sullivan,et al.  High-efficiency inverter for photovoltaic applications , 2010, 2010 IEEE Energy Conversion Congress and Exposition.

[21]  Geoffrey R. Walker,et al.  Photovoltaic DC-DC module integrated converter for novel cascaded and bypass grid connection topologies - design and optimisation , 2006 .

[22]  Michael D. Seeman,et al.  A high-voltage CMOS IC and embedded system for distributed photovoltaic energy optimization with over 99% effective conversion efficiency and insertion loss below 0.1% , 2012, 2012 IEEE International Solid-State Circuits Conference.

[23]  O. Trescases,et al.  DC-DC converter for high granularity, sub-string MPPT in photovoltaic applications using a virtual-parallel connection , 2012, 2012 Twenty-Seventh Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[24]  Michael D. Seeman,et al.  A comparative analysis of Switched-Capacitor and inductor-based DC-DC conversion technologies , 2010, 2010 IEEE 12th Workshop on Control and Modeling for Power Electronics (COMPEL).