The effect of geopolymer slurries with clinker aggregates and marble waste powder on embodied energy and high-temperature resistance in prepacked concrete: ANFIS-based prediction model

[1]  A. Aydın,et al.  The radiation shielding and microstructure properties of quartzic and metakaolin based geopolymer concrete , 2022, Construction and Building Materials.

[2]  T. Yang,et al.  Sulphate resistance of one-part geopolymer synthesized by calcium carbide residue-sodium carbonate-activation of slag , 2022, Composites Part B: Engineering.

[3]  G. Kaplan,et al.  Effect of quartz powder on mid-strength fly ash geopolymers at short curing time and low curing temperature , 2022, Construction and Building Materials.

[4]  Mucteba Uysal,et al.  Physical and mechanical properties of metakaolin-based geopolymer mortars containing various waste powders , 2022, European Journal of Environmental and Civil Engineering.

[5]  Orhan Canpolat,et al.  Elevated Temperature, Freezing–Thawing and Mechanical Properties of Limestone, Marble, and Basalt Powders Reinforced Metakaolin–Red Mud-Based Geopolymer Mortars , 2022, Iranian Journal of Science and Technology, Transactions of Civil Engineering.

[6]  M. Lachemi,et al.  Optimized application of ternary brick, ceramic and concrete wastes in sustainable high strength geopolymers , 2022, Journal of Cleaner Production.

[7]  Tiejun Liu,et al.  A novel synthesis of lightweight and high-strength green geopolymer foamed material by rice husk ash and ground-granulated blast-furnace slag , 2022, Resources, Conservation and Recycling.

[8]  M. Nematzadeh,et al.  Post-fire impact behavior and durability of steel fiber-reinforced concrete containing blended cement–zeolite and recycled nylon granules as partial aggregate replacement , 2021, Archives of Civil and Mechanical Engineering.

[9]  Fatheali A Shilar,et al.  Investigation of the effect of granite waste powder as a binder for different molarity of geopolymer concrete on fresh and mechanical properties , 2021, Materials Letters.

[10]  A. El-Nemr,et al.  The performance of fiber GGBS based alkali-activated concrete , 2021 .

[11]  M. Nematzadeh,et al.  Bond behavior of lightweight concrete-filled steel tubes containing rock wool waste after exposure to high temperatures , 2021 .

[12]  O. Bayraktar,et al.  Effect of waste marble powder and rice husk ash on the microstructural, physico-mechanical and transport properties of foam concretes exposed to high temperatures and freeze–thaw cycles , 2021, Construction and Building Materials.

[13]  Ghasan Fahim Huseien,et al.  Experimental and Informational Modeling Study of Sustainable Self-Compacting Geopolymer Concrete , 2021, Sustainability.

[14]  O. Bayraktar,et al.  Physico-mechanical, durability and thermal properties of basalt fiber reinforced foamed concrete containing waste marble powder and slag , 2021 .

[15]  Seyed Hosein Ghasemzadeh Mousavinejad,et al.  Effects of alkaline solution to binder ratio on fracture parameters of steel fiber reinforced heavyweight geopolymer concrete , 2021 .

[16]  A. Aydın,et al.  The effect of trio-fiber reinforcement on the properties of self-compacting fly ash concrete , 2021 .

[17]  Fahad K. Alqahtani,et al.  Assessment of morphological characteristics and physico-mechanical properties of geopolymer green foam lightweight aggregate formulated by microwave irradiation , 2021 .

[18]  P. Kathirvel,et al.  Sustainable development of ultra high performance concrete using geopolymer technology , 2021, Journal of Building Engineering.

[19]  Kemalettin Yilmaz,et al.  A more sustainable approach for producing less expensive electrically conductive concrete mixtures: Experimental and FE study , 2021 .

[20]  M. Lachemi,et al.  Development of normal and very high strength geopolymer binders based on concrete waste at ambient environment , 2021 .

[21]  A. Aydın,et al.  The mechanical behavior of thermally enhanced polypropylene concrete , 2020 .

[22]  Hussam Alghamdi,et al.  Drying shrinkage and creep properties of prepacked aggregate concrete reinforced with waste polypropylene fibers , 2020 .

[23]  Rajesh Gupta,et al.  Mechanical and abrasion resistance performance of silica fume, marble slurry powder, and fly ash amalgamated high strength self-consolidating concrete , 2020 .

[24]  M. Tavakkolizadeh,et al.  Effect of magnetized water on the fresh, hardened and durability properties of mortar mixes with marble waste dust as partial replacement of cement , 2020 .

[25]  Shaban Ismael Albrka Ali,et al.  Experimental Evaluation and Modeling of Polymer Nanocomposite Modified Asphalt Binder Using ANN and ANFIS , 2020 .

[26]  Kae-Long Lin,et al.  Sustainable Development and Performance Evaluation of Marble-Waste-Based Geopolymer Concrete , 2020, Polymers.

[27]  M. P. Salaimanimagudam,et al.  Multi-layered two stage fibrous composites against low-velocity falling mass and projectile impact , 2020 .

[28]  A. Madhukar,et al.  Performance Evaluation of Cost-Effective Non-autoclaved Aerated Geopolymer (NAAG) Blocks , 2020 .

[29]  B. Walkley,et al.  Metakaolin-based geopolymers: Relation between formulation, physicochemical properties and efflorescence formation , 2020, Composites Part B: Engineering.

[30]  S. Rossignol,et al.  Formulation of an alkali-activated grout based on Callovo-Oxfordian argillite for an application in geological radioactive waste disposal , 2020 .

[31]  M. Tahir,et al.  Enhancement of strength and transport properties of a novel preplaced aggregate fiber reinforced concrete by adding waste polypropylene carpet fibers , 2020 .

[32]  Navid Ranjbar,et al.  Dissolution mechanism of fly ash to quantify the reactive aluminosilicates in geopolymerisation , 2019, Resources, Conservation and Recycling.

[33]  T. Ngo,et al.  High strength/density ratio in a syntactic foam made from one-part mix geopolymer and cenospheres , 2019, Composites Part B: Engineering.

[34]  Cengiz Duran Atiş,et al.  Influence of waste marble powder as a replacement of cement on the properties of mortar , 2019, Revista de la construcción.

[35]  Cheng Yi,et al.  Preparation and Reaction Mechanism Characterization of Alkali-activated Coal Gangue–Slag Materials , 2019, Materials.

[36]  V. Thakur,et al.  Synthesis and characterization of new class of geopolymer hybrid composite materials from industrial wastes , 2019, Journal of Cleaner Production.

[37]  Sandeep Chaudhary,et al.  Development of rubberized geopolymer concrete: Strength and durability studies , 2019, Construction and Building Materials.

[38]  A. Gholampour,et al.  Ambient-cured geopolymer mortars prepared with waste-based sands: Mechanical and durability-related properties and microstructure , 2019, Composites Part B: Engineering.

[39]  G. Murali,et al.  A feasibility of enhancing the impact strength of novel layered two stage fibrous concrete slabs , 2018, Engineering Structures.

[40]  Jorge de Brito,et al.  Improving corrosion resistance of steel rebars in concrete with marble and granite waste dust as partial cement replacement , 2018, Construction and Building Materials.

[41]  M. Mellas,et al.  Effects of marble powder on the properties of the air-cured blended cement paste , 2018 .

[42]  A. K. Vyas,et al.  Utilization of marble powder as fine aggregate in mortar mixes , 2018 .

[43]  G. Mucsi,et al.  Fiber reinforced geopolymer from synergetic utilization of fly ash and waste tire , 2018 .

[44]  K. MacKenzie,et al.  Synthesis and Catalytic Properties of New Sustainable Aluminosilicate Heterogeneous Catalysts Derived from Fly Ash , 2018 .

[45]  C. D. Wolf,et al.  Impact of Embodied Energy on materials/buildings with partial replacement of ordinary Portland Cement (OPC) by natural Pozzolanic Volcanic Ash , 2018 .

[46]  Mudasser A. Khan,et al.  Analysis of Mechanical Properties of Self Compacted Concrete by Partial Replacement of Cement with Industrial Wastes under Elevated Temperature , 2018 .

[47]  N. A. Deskins,et al.  Modeling the Polymerization Process for Geopolymer Synthesis through Reactive Molecular Dynamics Simulations , 2018 .

[48]  H. A. Razak,et al.  Effect of Coating Palm Oil Clinker Aggregate on the Engineering Properties of Normal Grade Concrete , 2017 .

[49]  Kuldip Singh Sangwan,et al.  A study on environmental and economic impacts of using waste marble powder in concrete , 2017 .

[50]  V. Thakur,et al.  Towards sustainable micro and nano composites from fly ash and natural fibers for multifunctional applications , 2017 .

[51]  R. Khan,et al.  Sustainable use of copper slag in self compacting concrete containing supplementary cementitious materials , 2017 .

[52]  M. F. Najjar,et al.  Damage mechanisms of two-stage concrete exposed to chemical and physical sulfate attack , 2017 .

[53]  U. J. Alengaram,et al.  Feasibility study on the use of high volume palm oil clinker waste in environmental friendly lightweight concrete , 2017 .

[54]  Vahid Nourani,et al.  A new approach to flow simulation using hybrid models , 2017, Applied Water Science.

[55]  Jazuli Abdullahi,et al.  River water modelling prediction using multi-linear regression, artificial neural network, and adaptive neuro-fuzzy inference system techniques , 2017 .

[56]  H. A. Razak,et al.  Assessment of pozzolanic activity of palm oil clinker powder , 2016 .

[57]  F. Puertas,et al.  Effect of metakaolin on natural volcanic pozzolan-based geopolymer cement , 2016 .

[58]  Hasan Şahan Arel,et al.  Recyclability of waste marble in concrete production , 2016 .

[59]  Sanjay Kumar,et al.  Reactivity of volcanic ash in alkaline medium, microstructural and strength characteristics of resulting geopolymers under different synthesis conditions , 2016, Journal of Materials Science.

[60]  Navid Ranjbar,et al.  Potential of using granite waste as raw material for geopolymer synthesis , 2016 .

[61]  M. C. Narasimhan,et al.  Performance of alkali activated slag concrete mixes incorporating copper slag as fine aggregate , 2016 .

[62]  Hao Wang,et al.  Geopolymer from kaolin in China: An overview , 2016 .

[63]  Hamid Nikraz,et al.  Comparison of embodied energies of Ordinary Portland Cement with Bayer-derived geopolymer products , 2015 .

[64]  Hashim Abdul Razak,et al.  Engineering and sustainability performance of self-compacting palm oil mill incinerated waste concrete , 2015 .

[65]  J. Górski,et al.  Concrete repair using two-stage concrete method , 2015 .

[66]  M. F. Najjar,et al.  Critical overview of two-stage concrete: Properties and applications , 2014 .

[67]  Muhammad Sani Gaya,et al.  ANFIS Modelling of Carbon and Nitrogen Removal in Domestic Wastewater Treatment Plant , 2014 .

[68]  F. Collins,et al.  Carbon dioxide equivalent (CO2-e) emissions: A comparison between geopolymer and OPC cement concrete , 2013 .

[69]  C. Natarajan,et al.  Strength, Economic and Sustainability Characteristics of Coal Ash -GGBS Based Geopolymer Concrete. , 2013 .

[70]  Antoine Elimbi,et al.  The effect of adding alumina-oxide to metakaolin and volcanic ash on geopolymer products: A comparative study , 2012 .

[71]  Minfang Han,et al.  The influence of α-Al2O3 addition on microstructure, mechanical and formaldehyde adsorption properties of fly ash-based geopolymer products. , 2011, Journal of hazardous materials.

[72]  Alaa M. Rashad,et al.  The effect of activator concentration on the residual strength of alkali-activated fly ash pastes subjected to thermal load , 2011 .

[73]  C. Villa,et al.  Geopolymer synthesis using alkaline activation of natural zeolite , 2010 .

[74]  V. Rose,et al.  Effect of silicate modulus and metakaolin incorporation on the carbonation of alkali silicate-activated slags , 2010 .

[75]  C. Chen,et al.  Environmental impact of cement production: detail of the different processes and cement plant variability evaluation , 2010 .

[76]  J. Temuujin,et al.  Influence of calcium compounds on the mechanical properties of fly ash geopolymer pastes. , 2009, Journal of hazardous materials.

[77]  D. Huntzinger,et al.  A life-cycle assessment of Portland cement manufacturing: comparing the traditional process with alternative technologies , 2009 .

[78]  Kostas Komnitsas,et al.  Geopolymerisation: A review and prospects for the minerals industry , 2007 .

[79]  J. Deventer,et al.  Geopolymer technology: the current state of the art , 2007 .

[80]  Francisca Puertas,et al.  Effect of Shrinkage-reducing Admixtures on the Properties of Alkali-activated Slag Mortars and Pastes , 2007 .

[81]  Raffaele Cioffi,et al.  Optimization of geopolymer synthesis by calcination and polycondensation of a kaolinitic residue , 2003 .

[82]  Jing Zhang,et al.  PREPACKED GROUTING PROCESS IN CONCRETE CONSTRUCTION , 2003 .

[83]  J. Phair,et al.  Effect of the silicate activator pH on the microstructural characteristics of waste-based geopolymers , 2002 .

[84]  Hakim S. Abdelgader,et al.  How to design concrete produced by a two-stage concreting method , 1999 .