Development of a new finite element for composite delamination analysis

A new solid hexahedron element for composite delamination analysis is introduced. The 8-node solid is derived from a 20-node hexahedron element and has three translational and three rotational degrees of freedom. The particularity of this new element is its aptitude to be transformed into two physically independent 4-node shell elements. This separation into two shells is governed by a delamination criterion. Thus, the decrease in mechanical properties due to delamination, i.e., bending stiffness and buckling resistance, is correctly represented independently of the membrane stiffness which, in some cases, might stay intact. This element will be essentially used to model damages on structures like helicopter blades and sine-wave crash absorber beams. The actual classical modelling of such complex structures is onerous. The new element will allow simplifying models and decreasing the calculation time. Experimental tests are carried out on composite structures such as double cantilever beam specimens. The DCB test is modelled using the new element. A delamination criterion based on the virtual crack closure method and beam theory is used to govern the delamination propagation. The numerical simulation correlate well with the experimental results.

[1]  R. L. Harder,et al.  A proposed standard set of problems to test finite element accuracy , 1985 .

[2]  Vincent B. C. Tan,et al.  Element-failure concepts for dynamic fracture and delamination in low-velocity impact of composites , 2003 .

[3]  Alberto Corigliano,et al.  Damage analysis of interlaminar fracture specimens , 1995 .

[4]  Robert D. Cook,et al.  On improved hybrid finite elements with rotational degrees of freedom , 1989 .

[5]  David C. Fleming,et al.  Delamination Modeling of Improved Crash Analysis Composites for , 1999 .

[6]  Michael A. McCarthy,et al.  Finite element modelling of crash response of composite aerospace sub-floor structures , 2000 .

[7]  Stephen R Hallett,et al.  Prediction of impact damage in composite plates , 2000 .

[8]  G. R. Johnson,et al.  An element-failure algorithm for dynamic crack propagation in general directions , 1998 .

[9]  Jean-Christophe Walrick.  Contribution au développement d'une nouvelle méthodologie pour l'étude du délaminage dans les structures stratifiées composites : Application à l'impact basse vitesse , 1999 .

[10]  Y. Ousset,et al.  Comparison between two approaches for the simulation of delamination growth in a D.C.B. specimen , 2002 .

[11]  O. Majeed,et al.  Numerical modelling of transverse impact on composite coupons , 1994 .

[12]  Alberto Corigliano,et al.  Simulation of damage in composites by means of interface models: parameter identification , 2001 .

[13]  George A. Kardomateas,et al.  Experimental and numerical analysis of delamination growth in double cantilever laminated beams , 2002 .

[14]  S Sridharan,et al.  Predicting and tracking interlaminar crack growth in composites using a cohesive layer model , 2001 .

[15]  V. Tamužs,et al.  Progressive delamination and fiber bridging modeling in double cantilever beam composite specimens , 2001 .

[16]  Robert D. Cook,et al.  Solid elements with rotational degrees of freedom: Part II—tetrahedron elements , 1991 .

[17]  G. De Roeck,et al.  Strain energy release rate formulae for 3D finite element , 1995 .

[18]  David C. Fleming,et al.  Delamination Modeling of Composites for Improved Crash Analysis , 2001 .