A comprehensive model for optical and thermal characterization of a linear Fresnel solar reflector with a trapezoidal cavity receiver

In this paper, a comprehensive numerical model was developed by coupling Monte Carlo Ray Tracing (MCRT) and Finite Volume Method (FVM) for simulating the energy conversion process in the linear Fresnel reflector (LFR) with a Trapezoidal Cavity Receiver (TCR). Based on the model, firstly, the optical performance of a typical LFR was studied, followed by analyzing its heat transfer characteristics and thermal performance at various conditions. Then, the effects of key parameters were investigated. Finally, a LFR prototype was simulated to illustrate the application of the model. The results indicate that the solar fluxes on the absorber tubes exhibit non-uniform characteristics which would result in the non-uniform temperatures. The annual optical efficiency of 60.1%–44.7% from the equator to N50° and the collector efficiency of 48.3%–72.0% for the superheating section at normal incidence can be achieved, respectively. Moreover, the heat transfer characteristic study reveals that the radiation loss from the tubes is the dominant mode and contributes around 81%–87% at typical conditions. Parameter studies indicate that the energy absorbed by the glass which influences the heat loss obviously should be considered in the heat loss study of TCR. And the heat loss from the tubes increases rapidly with the coating emissivity, so the coating with low emissivity should be recommended for the TCR. In addition, the application in the realistic LFR indicates that the present model is an exercisable and useful tool for the LFR.

[1]  Ya-Ling He,et al.  Study on combined heat loss of a dish receiver with quartz glass cover , 2013 .

[2]  Qianjun Mao,et al.  Heat transfer analyses of porous media receiver with multi-dish collector by coupling MCRT and FVM method , 2013 .

[3]  G. Morrison,et al.  Compact Linear Fresnel Reflector solar thermal powerplants , 2000 .

[4]  Armando C. Oliveira,et al.  Numerical simulation of a trapezoidal cavity receiver for a linear Fresnel solar collector concentrator , 2011 .

[5]  Rubén Abbas,et al.  High concentration linear Fresnel reflectors , 2013 .

[6]  Ricardo Muñoz Rodríguez Nuevos sistemas de potencia para generación termosolar con generación directa de vapor: caso de éxito de Puerto Errado 2 , 2012 .

[7]  Eckhard Lüpfert,et al.  Advances in Parabolic Trough Solar Power Technology , 2002 .

[8]  Ya-Ling He,et al.  A design method and numerical study for a new type parabolic trough solar collector with uniform solar flux distribution , 2014 .

[9]  Ya-Ling He,et al.  Study on optical and thermal performance of a linear Fresnel solar reflector using molten salt as HTF with MCRT and FVM methods , 2015 .

[10]  Panna Lal Singh,et al.  Thermal performance of linear Fresnel reflecting solar concentrator with trapezoidal cavity absorbers , 2010 .

[11]  Suneet Singh,et al.  Steady state hydrothermal analysis of the absorber tubes used in Linear Fresnel Reflector solar thermal system , 2013 .

[12]  Ya-Ling He,et al.  Numerical simulation of solar radiation transmission process for the solar tower power plant: From the heliostat field to the pressurized volumetric receiver , 2013 .

[13]  Roberto Grena,et al.  Solar linear Fresnel collector using molten nitrates as heat transfer fluid , 2011 .

[14]  Juan Xiao,et al.  Three-dimensional numerical study of heat transfer characteristics in the receiver tube of parabolic trough solar collector , 2010 .

[15]  G. Zhu Development of an Analytical Optical Method for Linear Fresnel Collectors , 2013 .

[16]  Yuwen Zhang,et al.  A novel integrated simulation approach couples MCRT and Gebhart methods to simulate solar radiation transfer in a solar power tower system with a cavity receiver , 2016 .

[17]  K. Ravi Kumar,et al.  Estimation of convective and radiative heat losses from an inverted trapezoidal cavity receiver of solar linear Fresnel reflector system , 2014 .

[18]  Yu Qiu,et al.  A detailed nonuniform thermal model of a parabolic trough solar receiver with two halves and two inactive ends , 2015 .

[19]  Ya-Ling He,et al.  A MCRT and FVM coupled simulation method for energy conversion process in parabolic trough solar collector , 2011 .

[20]  Wang Fuqiang,et al.  Effects of glass cover on heat flux distribution for tube receiver with parabolic trough collector system , 2015 .

[21]  M. McLinden,et al.  NIST Standard Reference Database 23: Reference Fluid Thermodynamic and Transport Properties-REFPROP, Version 8.0 , 2007 .

[22]  Ya-Ling He,et al.  Convective Heat Transfer Enhancement: Mechanisms, Techniques, and Performance Evaluation , 2014 .

[23]  Ya-Ling He,et al.  Numerical simulation of a parabolic trough solar collector with nonuniform solar flux conditions by coupling FVM and MCRT method , 2012 .

[24]  Viorel Badescu,et al.  Theoretical derivation of heliostat tracking errors distribution , 2008 .

[25]  Zhifeng Wang,et al.  Tracking and ray tracing equations for the target-aligned heliostat for solar tower power plants , 2011 .

[26]  Clifford K. Ho,et al.  Solar optical codes evaluation for modeling and analyzing complex solar receiver geometries , 2014, Optics & Photonics - Optical Engineering + Applications.

[27]  Ming-Jia Li,et al.  Modeling a hybrid methodology for evaluating and forecasting regional energy efficiency in China , 2017 .

[28]  Yao Azoumah,et al.  Concentrated solar power: Current technologies, major innovative issues and applicability to West African countries , 2013 .

[29]  Suneet Singh,et al.  Analysis of heat losses from a trapezoidal cavity used for Linear Fresnel Reflector system , 2012 .

[30]  Zhifeng Wang,et al.  Modeling and simulation of the pioneer 1 MW solar thermal central receiver system in China , 2009 .

[31]  Tim Wendelin,et al.  SolTRACE: A New Optical Modeling Tool for Concentrating Solar Optics , 2003 .

[32]  Ya-Ling He,et al.  Modeling of the Dish Receiver With the Effect of Inhomogeneous Radiation Flux Distribution , 2014 .

[33]  Ya-Ling He,et al.  Analysis of thermal stress and fatigue fracture for the solar tower molten salt receiver , 2016 .

[34]  Ya-Ling He,et al.  Numerical study on coupling phase change heat transfer performance of solar dish collector , 2013 .

[35]  Graham L. Morrison,et al.  Transient Modelling of Cavity Receiver Heat Transfer for the Compact Linear Fresnel Reflector , 2003 .

[36]  Shinu M. Varghese,et al.  Experimental investigation and computational validation of heat losses from the cavity receiver used in linear Fresnel reflector solar thermal system , 2013 .

[37]  J. J. Serrano-Aguilera,et al.  Thermal 3D model for Direct Solar Steam Generation under superheated conditions , 2014 .

[38]  M. Behnia,et al.  An Experimental and Computational Study of the Heat Loss Characteristics of a Trapezoidal Cavity Absorber , 2004 .

[39]  Ya-Ling He,et al.  Numerical optimization of catalyst configurations in a solar parabolic trough receiver–reactor with non-uniform heat flux , 2015 .

[40]  S. Flores Larsen,et al.  Heat loss of a trapezoidal cavity absorber for a linear Fresnel reflecting solar concentrator , 2012 .

[41]  Ya-Ling He,et al.  Numerical simulations of the solar transmission process for a pressurized volumetric receiver , 2012 .

[42]  K. Sumathy,et al.  Performance investigation on a linear Fresnel lens solar collector using cavity receiver , 2014 .

[43]  Ya-Ling He,et al.  An entransy dissipation-based optimization principle for solar power tower plants , 2014 .

[44]  Sendhil Kumar Natarajan,et al.  Combined laminar natural convection and surface radiation heat transfer in a modified cavity receiver of solar parabolic dish , 2008 .

[45]  Tapas K. Mallick,et al.  Heat loss characteristics of trapezoidal cavity receiver for solar linear concentrating system , 2012 .

[46]  G. D. Sootha,et al.  A comparative study of optical designs and solar flux concentrating characteristics of a linear fresnel reflector solar concentrator with tubular absorber , 1994 .

[47]  Ya-Ling He,et al.  Multiscale Simulations of Heat Transfer and Fluid Flow Problems , 2012 .

[48]  Pierre Garcia,et al.  Codes for solar flux calculation dedicated to central receiver system applications : A comparative review , 2008 .

[49]  H. Tan,et al.  Calculation techniques with the Monte Carlo method in stray radiation evaluation , 2005 .

[50]  K. Sumathy,et al.  Experimental and theoretical analysis on a linear Fresnel reflector solar collector prototype with V-shaped cavity receiver , 2013 .

[51]  Liu Damping The Development of a Software for Solar Radiation and its Verification by the Measurement Results on the Spot , 2002 .