Effects of deposition rate and thickness on the properties of YBCO films deposited by pulsed laser deposition

YBCO films with various thicknesses from 100 nm to 1.6 µm were deposited on single crystal SrTiO3 substrates by pulsed laser deposition (PLD). The effects of thickness and deposition rate—by means of controlling the pulsed laser frequency—on the critical current density (Jc) were studied. X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used to examine the orientation, crystallization and surface quality. The amount of a-axis YBCO component evaluated from the ratio of XRD chi-scan intensities of the a-axis and c-axis for the YBCO (102) plane increased as the YBCO film became thicker. SEM was used to analyse the surface of YBCO film, and it was shown that the surface of YBCO film became rougher with increasing thickness. There were many large singular outgrowths and networks of outgrowths on the surface of the YBCO films with thickness greater than 0.4 µm. The increased amount of a-axis YBCO component and the coarse microstructure of the thick YBCO film caused degradation of Jc with increasing thickness.

[1]  A. Zhukov,et al.  Microstructural characterisation of high Jc, YBCO thick films grown at very high rates and high temperatures by PLD , 2002 .

[2]  I. Rusakova,et al.  Different relaxation mechanisms of epitaxial strain in YBa2Cu3O7-δ films deposited on SrTiO3 and LaAlO3 , 2001 .

[3]  A. Sawa,et al.  Microstructure of YBa2Cu3O7−y films on CeO2-buffered Al2O3 , 2001 .

[4]  L. Katgerman,et al.  Production of Al–Ti–C grain refiner alloys by reactive synthesis of elemental powders: Part I. Reactive synthesis and characterization of alloys , 2000 .

[5]  Joo Hyung Park,et al.  Orientation transition in a thick laser deposited YBa2Cu3O7−x film observed by glancing angle X-ray diffraction , 1999 .

[6]  G. Sung,et al.  Cubic Y-Ba-Cu-O thin films by high speed pulsed laser deposition , 1998 .

[7]  John H. Miller,et al.  Pulsed laser deposition of oxides: Why the optimum rate is about 1 Å per pulse , 1998 .

[8]  Q. Jia,et al.  Influence of deposition rate on the properties of thick YBa 2 Cu 3 O 7–δ films , 1997 .

[9]  John D. Budai,et al.  Epitaxial YBa2Cu3O7 on Biaxially Textured Nickel (001): An Approach to Superconducting Tapes with High Critical Current Density , 1996, Science.

[10]  K. Hayashi,et al.  Biaxially aligned YBCO film tapes fabricated by all pulsed laser deposition , 1996 .

[11]  John D. Budai,et al.  High critical current density superconducting tapes by epitaxial deposition of YBa2Cu3Ox thick films on biaxially textured metals , 1996 .

[12]  H. Börner,et al.  Large‐area double‐side pulsed laser deposition of YBa2Cu3O7−x thin films on 3‐in. sapphire wafers , 1996 .

[13]  T. Ohkuma,et al.  One meter long thin film tape with Jc more than 10 5 A/cm 2 fabricated by pulsed laser deposition , 1995 .

[14]  P. Calvert.  Biomimetic Ceramics and Composites , 1992 .

[15]  N. Tanabe,et al.  In‐plane aligned YBa2Cu3O7−x thin films deposited on polycrystalline metallic substrates , 1992 .

[16]  O. Eibl,et al.  Microstructure of YBa_2Cu_3O_7–x thin films deposited by laser evaporation , 1990 .