Laser-clad FeCrAl/TiC composite coating on ferrite/martensitic steel: Significant grain refinement and wear resistance enhancement induced by adding TiC

[1]  Yu Shi,et al.  Corrosion resistance of 316 stainless steel in a simulated pressurized water reactor improved by laser cladding with chromium , 2022, Surface and Coatings Technology.

[2]  Qiusen Wang,et al.  Laser-clad Nb(Ta)TiZr medium-entropy alloy coatings on pure Zr sheet: Microstructural characteristics, hardness and wear resistance , 2022, Intermetallics.

[3]  Huihui Yang,et al.  Design, microstructure and thermal stability of a novel heat-resistant Al-Fe-Ni alloy manufactured by selective laser melting , 2021 .

[4]  L. Chai,et al.  Microstructural characteristics, hardness and wear resistance of a typical ferritic/martensitic steel surface-treated by pulsed laser , 2021, Surface and Coatings Technology.

[5]  G. Le,et al.  Effects of TiC nanoparticle additions on microstructure and mechanical properties of FeCrAl alloys prepared by directed energy deposition , 2021 .

[6]  C. Qiu,et al.  Design and development of TiC-reinforced 410 martensitic stainless steel coatings fabricated by laser cladding , 2021 .

[7]  X. Ren,et al.  Interface phase evolution during laser cladding of Ni-Cu alloy on nodular cast iron by powder pre-placed method , 2021 .

[8]  Jae-il Jang,et al.  Oxidation-resistant coating of FeCrAl on Zr-alloy tubes using 3D printing direct energy deposition , 2021 .

[9]  V. Botton,et al.  Corrosion of T91 and pure iron in flowing and static Pb-Bi alloy between 450 °C and 540 °C: experiments, modelling and mechanism , 2020 .

[10]  Amit Kumar Srivastava,et al.  Tribological behavior of graphene-reinforced 316L stainless-steel composite prepared via selective laser melting , 2020 .

[11]  A. Mertens,et al.  Laser cladding of TiC reinforced 316L stainless steel composites: Feedstock powder preparation and microstructural evaluation , 2020 .

[12]  D. Giuranno,et al.  Al rich PVD protective coatings: A promising approach to prevent T91 steel corrosion in stagnant liquid lead , 2019, Surface and Coatings Technology.

[13]  C. Schroer,et al.  Corrosion Interaction of 9%Cr Ferritic/Martensitic Steels at 450 and 550 °C With Flowing Pb–Bi Eutectic Containing 10−7 Mass % Dissolved Oxygen , 2019, Journal of Nuclear Engineering and Radiation Science.

[14]  Sang-kwan Lee,et al.  Effect of TiC particle size on high temperature oxidation behavior of TiC reinforced stainless steel , 2019, Applied Surface Science.

[15]  L. Chai,et al.  Effects of laser surface alloying with Cr on microstructure and hardness of commercial purity Zr , 2019, Journal of Alloys and Compounds.

[16]  Huijun Li,et al.  Formation mechanisms of Y–Al–O complex oxides in 9Cr-ODS steels with Al addition , 2019, Journal of Materials Science.

[17]  C. Dong,et al.  Microhardness and wear resistance of Al2O3-TiB2-TiC ceramic coatings on carbon steel fabricated by laser cladding , 2019, Ceramics International.

[18]  D. Grzesiak,et al.  Thermal behavior of the molten pool, microstructural evolution, and tribological performance during selective laser melting of TiC/316L stainless steel nanocomposites: Experimental and simulation methods , 2018, Journal of Materials Processing Technology.

[19]  Fabio Giannetti,et al.  GEN-IV LFR development: Status & perspectives , 2018 .

[20]  D. Grzesiak,et al.  Strengthening of stainless steel by titanium carbide addition and grain refinement during selective laser melting , 2018 .

[21]  Jenn‐Ming Yang,et al.  Densification behavior, microstructural evolution, and mechanical properties of TiC/316L stainless steel nanocomposites fabricated by selective laser melting , 2018 .

[22]  C. Schroer,et al.  Characterization of corrosion phenomena and kinetics on T91 ferritic/martensitic steel exposed at 450 and 550 °C to flowing Pb-Bi eutectic with 10−7 mass% dissolved oxygen , 2017 .

[23]  Kevin G. Field,et al.  Design, properties, and weldability of advanced oxidation-resistant FeCrAl alloys , 2017 .

[24]  Huijun Yu,et al.  Research and development status of laser cladding on magnesium alloys: A review , 2017 .

[25]  D. Grzesiak,et al.  Selective laser melting of TiC reinforced 316L stainless steel matrix nanocomposites: Influence of starting TiC particle size and volume content , 2016 .

[26]  Alessandro Alemberti,et al.  The Lead Fast Reactor: An Opportunity for the Future? , 2016 .

[27]  D. Alexandrov.  On the theory of Ostwald ripening in the presence of different mass transfer mechanisms , 2016 .

[28]  Qunying Huang,et al.  Development strategy and conceptual design of China Lead-based Research Reactor , 2016 .

[29]  P. Hosemann,et al.  Oxide scale formation on 316L and FeCrAl steels exposed to oxygen controlled static LBE at temperatures up to 800 °C , 2016 .

[30]  H. Di,et al.  Effect of Heat-Treatment Schedule on the Microstructure and Mechanical Properties of Cold-Rolled Dual-Phase Steels , 2015, Acta Metallurgica Sinica (English Letters).

[31]  M. Thuvander,et al.  Microstructural stability of Fe–Cr–Al alloys at 450–550 °C , 2015 .

[32]  John E. Kelly,et al.  Generation IV International Forum: A decade of progress through international cooperation , 2014 .

[33]  P. Leech.  Laser surface melting of a complex high alloy steel , 2014 .

[34]  P. Xu,et al.  Wear and corrosion resistance of laser cladding AISI 304 stainless steel/Al2O3 composite coatings , 2014 .

[35]  Yong Wang,et al.  Microstructure and Wear Resistance of Laser Clad Fe-Cr3C2 Composite Coating on 35CrMo Steel , 2013, Journal of Materials Engineering and Performance.

[36]  Ye-hua Jiang,et al.  Improving the corrosion resistance and mechanical property of 45 steel surface by laser cladding with Ni60CuMoW alloy powder , 2013 .

[37]  Michael Bruns,et al.  Oxide scales formed on Fe–Cr–Al-based model alloys exposed to oxygen containing molten lead , 2013 .

[38]  Y. Dai,et al.  FeCrAlY and TiN coatings on T91 steel after irradiation with 72 MeV protons in flowing LBE , 2012 .

[39]  V. Kain,et al.  Low temperature thermal aging of austenitic stainless steel welds: Kinetics and effects on mechanical properties , 2012 .

[40]  Alfons Weisenburger,et al.  Oxide scale formation of modified FeCrAl coatings exposed to liquid lead , 2012 .

[41]  Matthew M Nowell,et al.  A Review of Strain Analysis Using Electron Backscatter Diffraction , 2011, Microscopy and Microanalysis.

[42]  A. Borgenstam,et al.  Carbide grain growth in cemented carbides , 2011 .

[43]  J. Kim,et al.  A study of early corrosion behaviors of FeCrAl alloys in liquid lead–bismuth eutectic environments , 2010 .

[44]  Shigekazu Morito,et al.  The morphology and crystallography of lath martensite in alloy steels , 2006 .

[45]  Frank Zimmermann,et al.  Results of steel corrosion tests in flowing liquid Pb/Bi at 420-600 °C after 2000 h , 2002 .

[46]  J. Archard,et al.  The wear of metals under unlubricated conditions , 1956, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.