Analysis of the movement behaviour of soil between subsoilers based on the discrete element method

Abstract The identification of the movement behaviour of soil in the area under the combined effect of two subsoilers (i.e., the area between two subsoilers) is one of the key issues in determining a reasonable inter-subsoiling shovel distance. The present study established a working model of subsoiling using the discrete element method (DEM). Based on this model and an indoor soil-bin experiment, the present study focused on investigating the micro-movement and macro-disturbed behaviour of soil in the area under the combined effect of two subsoilers. The results show the following. (1) The range of transverse and longitudinal disturbance of soil decreased with increasing distance between the soil and subsoiler. The range of disturbance of the soil in the shallow layer was the widest, followed by the range of disturbance of the soil in the middle layer and the range of disturbance of the soil in the deep layer. The simulated and experimental values of the mean displacement of the soil in the shallow layer (tracer blocks with a side length of 10 mm) were 34.81 mm and 34.55 mm, respectively (error: 0.75%). (2) The force on the soil particles in the deep layer was the greatest, followed by the force on the soil particles in the middle layer and the force on the soil particles in the shallow layer. The force on and the velocity of movement of the soil particles at different locations decreased with increasing distance between the soil and subsoiler. (3) The discrete element simulation could accurately simulate the disturbance process of the soil subjected to subsoiling. The sectional profiles of the disturbed soil obtained from the simulation and experiment were consistent with each other. The relative error between the simulated and experimental values of the soil looseness and the soil disturbance coefficient was 14.45% and 12.06%, respectively. Based on the DEM combined with an indoor soil-bin experiment, the present study determined the movement behaviour of the soil in the area under the combined effect of two subsoilers. The results of the present study can facilitate in-depth investigations of the subsoiling shovel–soil interaction and provide a basis for making decisions to optimise subsoiler arrangements.

[1]  L. Kasisira,et al.  Energy optimization for subsoilers in tandem in a sandy clay loam soil , 2006 .

[2]  Walter Anderson,et al.  Combinations of ripping depth and tine spacing for compacted sandy and clayey soils , 2008 .

[3]  Chris Saunders,et al.  Three-dimensional discrete element modelling (DEM) of tillage: Accounting for soil cohesion and adhesion , 2015 .

[4]  Richard J. Godwin,et al.  A review of the effect of implement geometry on soil failure and implement forces , 2007 .

[5]  Ying Chen,et al.  Modeling of soil–claw interaction using the discrete element method (DEM) , 2016 .

[6]  Yu Shi,et al.  Tillage practices affect dry matter accumulation and grain yield in winter wheat in the North China Plain , 2016 .

[7]  J. Mak,et al.  Determining parameters of a discrete element model for soil–tool interaction , 2012 .

[8]  I. Shmulevich,et al.  Interaction between soil and a wide cutting blade using the discrete element method , 2007 .

[9]  Tavs Nyord,et al.  A discrete element model for soil–sweep interaction in three different soils , 2013 .

[10]  R. Berntsen,et al.  Soil fragmentation and the efficiency of tillage implements , 2002 .

[11]  Abdul Mounem Mouazen,et al.  Development of on-line measurement system of bulk density based on on-line measured draught, depth and soil moisture content , 2006 .

[12]  Abdul Mounem Mouazen,et al.  A numerical–statistical hybrid modelling scheme for evaluation of draught requirements of a subsoiler cutting a sandy loam soil, as affected by moisture content, bulk density and depth , 2002 .

[13]  Johan Arvidsson,et al.  Specific draught, soil fragmentation and straw incorporation for different tine and share types , 2010 .

[14]  A. Mouazen,et al.  Modelling soil-sweep interaction with discrete element method , 2013 .

[15]  Nikolaus J. Kuhn,et al.  The adoption of annual subsoiling as conservation tillage in dryland maize and wheat cultivation in northern China , 2007 .

[16]  Chen Jun,et al.  Distinct element method analysis and field experiment of soil resistance applied on the subsoiler. , 2014 .

[17]  Chris Saunders,et al.  Three-dimensional discrete element modelling of tillage: Determination of a suitable contact model and parameters for a cohesionless soil , 2014 .

[18]  Shafiqur Rahman,et al.  Soil Movement resulting from Sweep Type Liquid Manure Injection Tools , 2005 .

[19]  Ying Chen,et al.  Simulating shear behavior of a sandy soil under different soil conditions , 2011 .