The influence of peak shock stress on the high pressure phase transformation in Zr
暂无分享,去创建一个
T. Lookman | P. Rigg | E. Cerreta | C. Bronkhorst | D. Brown | J. Escobedo | C. Trujillo | F. Addessio | S. Fensin | G. Gray
[1] David J. Erskine,et al. Heterogeneous flow and brittle failure in shock-compressed silicon , 2013 .
[2] Riping Liu,et al. First-principles investigations on elastic and thermodynamic properties of zirconium under pressure , 2012 .
[3] S. Agnew,et al. Modeling the temperature dependent effect of twinning on the behavior of magnesium alloy AZ31B sheet , 2007 .
[4] G. Gray,et al. Mechanical behavior of zirconium and hafnium in tension and compression , 2005 .
[5] G. Gray,et al. The influence of interstitial oxygen and peak pressure on the shock loading behavior of zirconium , 2005 .
[6] S. G. Srinivasan,et al. Impurities block the α to ω martensitic transformation in titanium , 2003, Nature materials.
[7] C. Greeff,et al. Shock-induced α–ω transition in titanium , 2001 .
[8] G. T. Gray,et al. Influence of peak pressure and temperature on the structure/property response of shock- loaded Ta and Ta-10W , 1995 .
[9] M. Talianker,et al. Crystallography and a model of the α → ω phase transformation in zirconium , 1981 .
[10] J. C. Jamieson,et al. Crystal Structures of Titanium, Zirconium, and Hafnium at High Pressures , 1963, Science.
[11] E. Zaretsky. Dislocation multiplication in f. c. c. metals at presence of high shear stress , 1995 .
[12] Y. Vohra,et al. Omega phase in materials , 1982 .
[13] W. F. Hemsing,et al. Velocity sensing interferometer (VISAR) modification. , 1979, The Review of scientific instruments.