Role of voltage and gas in determining the mean diameter in Sn-58 Bi intermetallic compound nanoparticles for pulsed wire discharge

[1]  K. Niihara,et al.  “Particle Size Determinating Equation in Metallic Nanopowder Preparation by Pulsed Wire Discharge” , 2013, Japanese Journal of Applied Physics.

[2]  H. Suematsu.  “Synthesis of Ni–Cu Nanoparticles by Pulsed Wire Discharge and their Compositional Distribution” , 2008, Japanese Journal of Applied Physics.

[3]  Young-Bae Park,et al.  Effects of PCB surface finishes on the Mechanical and Electrical Reliabilities of Sn-0.7Cu Pb-free Solder Bump , 2015 .

[4]  Haoran Ma,et al.  Influence of rare earth Ce addition on the microstructure, properties and soldering reaction of pure Sn , 2014, Metals and Materials International.

[5]  Ashutosh Sharma,et al.  Effect of aluminium additions on wettability and intermetallic compound (IMC) growth of lead free Sn (2 wt. % Ag, 5 wt. % Bi) soldered joints , 2014, Electronic Materials Letters.

[6]  Bo-In Noh,et al.  Effect of rare earth metal Ce addition to Sn-Ag solder on interfacial reactions with Cu substrate , 2014, Metals and Materials International.

[7]  Sung-tag Oh,et al.  Microstructural, wetting, and mechanical characteristics of Sn-57.6Bi-0.4Ag alloys doped with metal-organic compounds , 2014, Electronic Materials Letters.

[8]  Liqiang Cao,et al.  Joule heating effect on oxide whisker growth induced by current stressing in Cu/Sn-58Bi/Cu solder joint , 2012, Electronic Materials Letters.

[9]  E. Çadırlı,et al.  Effect of solidification parameters on the microstructure of directionally solidified Sn-Bi-Zn lead-free solder , 2012, Metals and Materials International.

[10]  K. Niihara,et al.  Synthesis of intermetallic NiAl compound nanoparticles by pulsed wire discharge of twisted Ni and Al wires , 2012 .

[11]  Jun-Gyu Park,et al.  Electrodeposition of the Sn-58 wt.%Bi layer for low-temperature soldering , 2011 .

[12]  Jeongseok Oh,et al.  Tribological performance of Cu−Ni alloy nanoparticles synthesized using a pulsed-wire evaporation method , 2008 .

[13]  Hankwon Chang,et al.  Fabrication of alloy nanopowders by the electrical explosion of electrodeposited wires , 2007 .

[14]  W. Jesser,et al.  Two-phase equilibrium in individual nanoparticles of Bi-Sn , 2006 .

[15]  Zhishen Wu,et al.  A novel route to prepare and characterize Sn-Bi nanoparticles , 2005 .

[16]  H. Suematsu,et al.  Particle Size Distribution of Copper Nanosized Powders Prepared by Pulsed Wire Discharge , 2005 .

[17]  Tsuneo Suzuki,et al.  Increase in Phase Transition Temperature of Activated Alumina with Nano‐Zirconia Synthesized by Pulsed Wire Discharge , 2003 .

[18]  Kiyoshi Yatsui,et al.  Magnetic properties of nanosize NiFe2O4 particles synthesized by pulsed wire discharge , 2002 .

[19]  J. Duh,et al.  Microstructure evolution in Sn–Bi and Sn–Bi–Cu solder joints under thermal aging , 2001 .

[20]  K. Yatsui,et al.  Synthesis of Nanosize Powders of Aluminum Nitride by Pulsed Wire Discharge , 2000, 2000 13th International Conference on High-Power Particle Beams.

[21]  S. Corbin,et al.  Development of transient liquid phase sintered (TLPS) Sn-Bi solider pastes , 2000 .

[22]  C. Wronski.  The size dependence of the melting point of small particles of tin , 1967 .

[23]  J. Drowart,et al.  Mass spectrometric determination of dissociation energies of molecules Bi2, Bi3, Bi4 and BiPb , 1967 .

[24]  B. R. Fish,et al.  An exploding wire aerosol generator , 1962 .

[25]  R. F. Porter,et al.  The Heat of Sublimation of Tin and the Dissociation Energy of SnO , 1953 .