Inductively‐loaded RF MEMS reconfigurable filters

This article presents an inductively loaded radio frequency (RF) microelectromechanical systems (MEMS) reconfigurable filter with spurious suppression implemented using packaged metal-contact switches. Both simulation and measurement results show a two-state, two-pole 5p filter with a tuning range of 17p from 1.06 GHz to 1.23 GHz, an insertion loss of 1.56–2.28 dB and return loss better than 13 dB over the tuning range. The spurious passband response in both states is suppressed below -20 dB. The unloaded Q of the filter changes from 127 to 75 as the filter is tuned from 1.06 GHz to 1.23 GHz. The design and full-wave simulation of a two-bit RF MEMS tunable filter with inductively loaded resonators and monolithic metal-contact MEMS switches is also presented to prove the capability of applying the inductive-loading technique to multibit reconfigurable filters. The simulation results for a two-bit reconfigurable filter show 2.5 times improvement in the tuning range compared with the two-state reconfigurable filter due to lower parasitics associated with monolithic metal-contact MEMS switches in the filter structure. © 2009 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2009.

[1]  Elliott R. Brown,et al.  RF-MEMS switches for reconfigurable integrated circuits , 1998 .

[2]  Richard H. Morrison,et al.  A wafer-capped, high-lifetime ohmic MEMS RF switch , 2004 .

[3]  Gabriel M. Rebeiz,et al.  A high-performance integrated K-band diplexer , 1999, IMS 1999.

[4]  David Potter,et al.  Microswitches and microrelays with a view toward microwave applications , 1999 .

[5]  Gabriel M. Rebeiz.  RF MEMS: Theory, Design and Technology , 2003 .

[6]  Jen-Tsai Kuo,et al.  Microstrip stepped impedance resonator bandpass filter with an extended optimal rejection bandwidth , 2003 .

[7]  G.M. Rebeiz,et al.  Parallel-contact metal-contact RF-MEMS switches for high power applications , 2004, 17th IEEE International Conference on Micro Electro Mechanical Systems. Maastricht MEMS 2004 Technical Digest.

[8]  Gabriel M. Rebeiz,et al.  A varactor-tuned RF filter , 2000 .

[9]  S. R. Chandler,et al.  Active varactor tunable bandpass filter , 1993, IEEE Microwave and Guided Wave Letters.

[10]  J.I. Alonso,et al.  A new electronically tunable combline filter with simultaneous continuous control of central frequency and bandwidth , 2004, 2004 IEEE MTT-S International Microwave Symposium Digest (IEEE Cat. No.04CH37535).

[11]  Kai Chang,et al.  Handbook of microwave and optical components , 1989 .

[12]  Jia-Sheng Hong,et al.  Microstrip filters for RF/microwave applications , 2001 .

[13]  Eric Beyne,et al.  MEMS for wireless communications: ‘from RF-MEMS components to RF-MEMS-SiP’ , 2003 .

[14]  Laurent Dussopt,et al.  Miniature and tunable filters using MEMS capacitors , 2003 .

[15]  Gabriel M. Rebeiz,et al.  A high-performance integrated K-band diplexer , 1999, 1999 IEEE MTT-S International Microwave Symposium Digest (Cat. No.99CH36282).

[16]  A. Abbaspour-Tamijani.  Novel components for integrated millimeter -wave front -ends. , 2004 .

[17]  Gabriel M. Rebeiz,et al.  A 25–75-MHz RF MEMS Tunable Filter , 2007, IEEE Transactions on Microwave Theory and Techniques.

[18]  Gabriel M. Rebeiz,et al.  1.6-2.4 GHz RF MEMS tunable 3-pole suspended combline filter , 2008, 2008 IEEE MTT-S International Microwave Symposium Digest.