The challenges of designing a power supply including generation, storage and conversion are manifold and design problems are difficult to solve with off-the-shelf hardware components. One has to think about losses all the time when overall leakage currents of less than a few microamperes are desired. In general, reducing the complexity of the circuit reduces the power consumption as well, but efficient charging of an energy storage element such as a battery or ultracapacitor becomes difficult. Finding a well-balanced point where sum of leakage current and charging losses reaches a minimum is the way to go. This paper discusses this issues and shows some diagrams and solutions to the power supply problem one is confronted with, when designing energy self-sufficient sensor nodes.
[1]
H. L. Lee,et al.
Operating principles of the ultracapacitor
,
1989
.
[2]
Jan M. Rabaey,et al.
A 1.9GHz RF Transmit Beacon using Environmentally Scavenged Energy
,
2003
.
[3]
S. Mahlknecht,et al.
CSMA-MPS: a minimum preamble sampling MAC protocol for low power wireless sensor networks
,
2004,
IEEE International Workshop on Factory Communication Systems, 2004. Proceedings..
[4]
S. Mahlknecht,et al.
On the use of high bit rate transceivers for low duty cycle wireless sensor networks
,
2004,
2004 IEEE Africon. 7th Africon Conference in Africa (IEEE Cat. No.04CH37590).