Ultrastable long-distance fibre-optic time transfer: active compensation over a wide range of delays

In this paper we describe a new solution of active delay stabilization for fibre-optic distribution of time and RF-frequency signals, which allows one to obtain both high precision and a potentially unlimited range of compensation of the fibre delay fluctuations. The solution is based on a hybrid system exploiting a pair of continuously tuned electronic variable delay lines, and a set of switched optical delays. We present a fully operational prototype of the time and frequency distribution setup based on this idea, which is capable of compensating more than 1 µs of the fiber delay fluctuations, and thus may be used in very long-haul links up to about 1000 km, without the need for any seasonal maintenance. We also report measurements of the time and frequency distribution stability, and the verification of the time transfer calibration.

[1]  Christian Chardonnet,et al.  Simultaneous remote transfer of accurate timing and optical frequency over a public fiber network , 2013 .

[2]  Albin Czubla,et al.  Dissemination of time and RF frequency via a stabilized fibre optic link over a distance of 420 km , 2013 .

[3]  Przemyslaw Krehlik,et al.  Fiber-Optic Joint Time and Frequency Transfer With Active Stabilization of the Propagation Delay , 2012, IEEE Transactions on Instrumentation and Measurement.

[4]  R. B. Warrington,et al.  Stable radio-frequency transfer over optical fiber by phase-conjugate frequency mixing. , 2013, Optics express.

[5]  M. Lours,et al.  High-resolution microwave frequency dissemination on an 86-km urban optical link , 2009, 0907.3500.

[6]  Sven-Christian Ebenhag,et al.  Real-time phase stable one-way frequency transfer over optical fiber , 2012, 2012 European Frequency and Time Forum.

[7]  D. J. Richardson,et al.  Dissemination of an optical frequency comb over fiber with 3 × 10−18 fractional accuracy , 2012, Conference on Lasers and Electro-Optics.

[8]  Nicholas Ioannides,et al.  Approaches to mitigate polymer-core loss in plastic optical fibers: a review , 2014 .

[10]  A. Bauch,et al.  Time transfer through optical fibres over a distance of 73 km with an uncertainty below 100 ps , 2012, 1209.4467.

[11]  Przemyslaw Krehlik,et al.  Active Propagation Delay Stabilization for Fiber-Optic Frequency Distribution Using Controlled Electronic Delay Lines , 2011, IEEE Transactions on Instrumentation and Measurement.

[12]  Przemyslaw Krehlik,et al.  Frequency Transfer in Electronically Stabilized Fiber Optic Link Exploiting Bidirectional Optical Amplifiers , 2012, IEEE Transactions on Instrumentation and Measurement.

[13]  Z. Jiang,et al.  Towards accurate optical fibre time transfer in UTC , 2014, 2014 European Frequency and Time Forum (EFTF).

[14]  C Clivati,et al.  Frequency transfer via a two-way optical phase comparison on a multiplexed fiber network. , 2013, Optics letters.

[15]  T. Hänsch,et al.  A 920-Kilometer Optical Fiber Link for Frequency Metrology at the 19th Decimal Place , 2012, Science.

[16]  Vladimir Smotlacha,et al.  Two-way optical time and frequency transfer between IPE and BEV , 2012, 2012 European Frequency and Time Forum.

[17]  B. Wang,et al.  Precise and Continuous Time and Frequency Synchronisation at the 5×10-19 Accuracy Level , 2012, Scientific Reports.

[18]  Lukasz Sliwczynski,et al.  Bidirectional Optical Amplification in Long-Distance Two-Way Fiber-Optic Time and Frequency Transfer Systems , 2013, IEEE Transactions on Instrumentation and Measurement.

[19]  Tomonari Suzuyama,et al.  Precise Frequency Comparison System Using Bidirectional Optical Amplifiers , 2010, IEEE Transactions on Instrumentation and Measurement.

[20]  S. G. Crane,et al.  One-way two-color fiber link for frequency transfer , 2012, 2012 IEEE International Frequency Control Symposium Proceedings.