Effect of plastic anisotropy of ZK60 magnesium alloy sheet on its forming characteristics during deep drawing process

[1]  Q. Liu,et al.  Dependence of tensile and compressive deformation behavior on aging precipitation in rolled ZK60 alloys , 2015 .

[2]  K. Manabe,et al.  Plastic anisotropy of ultra-thin rolled phosphor bronze foils and its thickness strain evolution in micro-deep drawing , 2014 .

[3]  L. Chan,et al.  Material sensitivity and formability prediction of warm-forming magnesium alloy sheets with experimental verification , 2014 .

[4]  Walter Reimers,et al.  Mechanical properties and forming behavior of extruded AZ31 and ME21 magnesium alloy sheets , 2013 .

[5]  Zhu-bin He,et al.  Tensile deformation behavior of Ti–22Al–25Nb alloy at elevated temperatures , 2012 .

[6]  Qizhen Li,et al.  Mechanical properties and microstructure of pure polycrystalline magnesium rolled by different routes , 2012 .

[7]  S. Yao,et al.  Forming Limit Diagram of Magnesium Alloy ZK60 at Elevated Temperature , 2011 .

[8]  E. Han,et al.  Room-temperature ductility and anisotropy of two rolled Mg-Zn-Gd alloys , 2010 .

[9]  P. M. Dixit,et al.  Finite element simulation of earing defect in deep drawing , 2009 .

[10]  M. K. Kulekci.  Magnesium and its alloys applications in automotive industry , 2008 .

[11]  M. Mabuchi,et al.  Mechanical anisotropy due to twinning in an extruded AZ31 Mg alloy , 2008 .

[12]  Wang Zhongtang,et al.  Deep-drawing of magnesium alloy sheets at warm temperatures , 2007 .

[13]  S. Agnew,et al.  Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B , 2005 .

[14]  P. Uggowitzer,et al.  Mechanical anisotropy of extruded Mg-6% Al-1% Zn alloy , 2004 .

[15]  D. R. Kumar,et al.  Optimization of initial blank shape to minimize earing in deep drawing using finite element method , 2002 .

[16]  Daw-Kwei Leu,et al.  Prediction of the limiting drawing ratio and the maximum drawing load in cup-drawing , 1997 .

[17]  Dong-Yol Yang,et al.  An improved method for the application of blank-holding force considering the sheet thickness in the deep-drawing simulation of planar anisotropic sheet , 1995 .

[18]  Yoshikazu Kobayashi,et al.  Analysis of Earring in Circular-shell Deep-drawing of bcc and hcp Sheet Metals , 2014 .

[19]  J. Bohlen,et al.  Mechanical anisotropy and deep drawing behaviour of AZ31 and ZE10 magnesium alloy sheets , 2010 .

[20]  Frédéric Barlat,et al.  Plastic behavior and stretchability of sheet metals. Part I: A yield function for orthotropic sheets under plane stress conditions , 1989 .

[21]  E. Doege,et al.  Influence of Anisotropy in Sheet Metal Forming , 1988 .