The use of quicklime for soil thawing in pile foundation setting

Due to the fact that in the winter period, which in the Northern regions of the Republic of Kazakhstan lasts up to 6 months, and in the Southern regions – up to 4 months, construction companies are forced to suspend construction and installation works on the foundations. As a result, the total duration of construction of facilities increases, which leads to additional financial expenses. Therefore, new technological solutions are needed for the construction of foundations in winter, to ensure the continuity of construction and installation work. The purpose of the study is to develop a formula of chemical reagents for thawing and protection from the freezing of seasonally frozen soil in places where pile foundations are driven in winter conditions. For the study, a three-component mixture of chemical reagents of the following composition, wt.%, was selected: quick lime (CaO) – 75, calcium chloride (CaCl) – 20, sodium chloride (NaCl) – 5. The choice of the specified composition is determined by taking into account their specific chemical properties and special reactions when interacting with water and frozen soil. The active components of quick lime (CaO) are converted to Ca(OH)2 when interacting with a wet environment or water. This process is accompanied by spontaneous heat release. In the course of the study, a new composition of a chemical reagent based on quick lime was developed for local thawing and protection from the freezing of seasonally frozen clay soil in the areas of driving pile foundations. This composition has advantages in terms of reducing energy costs for thawing seasonally frozen soil, since when interacting with water, the proposed chemical reagent spontaneously releases heat (t = 100oC) and does not cool down for a long time despite the negative ambient temperature of the air.

[1]  L. Mamayeva,et al.  Qualitative indicators of milk of Simmental and Holstein cows in different seasons of lactation , 2021, Veterinary world.

[2]  A. Baibatsha,et al.  REMOTE SENSING TECHNIQUES FOR IDENTIFICATION OF MINERAL DEPOSIT , 2020, Periódico Tchê Química.

[3]  A. A. Aldaeef,et al.  Pull-Out Capacity and Creep Behavior of Helical Piles in Frozen Ground , 2020 .

[4]  O. Egorova,et al.  Solution of inverse non-stationary boundary value problems of diffraction of plane pressure wave on convex surfaces based on analytical solution , 2020 .

[5]  N. Koseva,et al.  Identifying the Influence of the Polymer Matrix Type on the Structure Formation of Micro-Composites When They Are Filled With Copper Particles , 2020 .

[6]  M. Karpets,et al.  Formation of Microstructure of Plasma-Arc Coatings Obtained Using Powder Wires with Steel Skin and B$_4$C+(Cr,Fe)$_7$С$_3$+Al Filler , 2020 .

[7]  Andrii Bieliatynskyi,et al.  Evaluation of the durability of asphalt concrete on polymer modified bitumen , 2020, E3S Web of Conferences.

[8]  I. Kapitonov,et al.  The role of national plans in developing the competitiveness of the state economy , 2020 .

[9]  G. M. Grigorenko,et al.  Plasma Arc Coatings Produced from Powder-Cored Wires with Steel Sheaths , 2020, Powder Metallurgy and Metal Ceramics.

[10]  R. Beisenova,et al.  Studying the Self-Cleaning Ability of Water Bodies and Watercounts of Arshalyn District of Akmola Region , 2020 .

[11]  R. Kourkoulis,et al.  A simplified numerical method to simulate the thawing of frozen soil , 2020 .

[12]  Baibatsha Adilkhan Bekdildauly,,et al.  3D MODELING FOR ESTIMATION OF ENGINEERING-GEOLOGICAL CONDITIONS OF OPERATING MINERAL DEPOSITS , 2020 .

[13]  Yulong Li,et al.  Method for solving plane unsteady contact problems for rigid stamp and elastic half-space with a cavity of arbitrary geometry and location , 2020 .

[14]  L. Rabinskiy,et al.  Investigation of the contact zone of a cylindrical shell located between two parallel rigid plates with a gap , 2020 .

[15]  E. L. Kuznetsova,et al.  Methods of diagnostic of pipe mechanical damage using functional analysis, neural networks and method of finite elements , 2020 .

[16]  Ying Sun,et al.  Effect of flight range on the dimension of the main aircraft , 2020 .

[17]  Ekaterina L. Kuznetsova,et al.  Complex mathematical modelling of mechatronic modules of promising mobile objects , 2020 .

[18]  Rushana R. Anamova,et al.  Algorithm for Designing Professional Retraining Programs Based on a Competency Approach , 2020, Education Sciences.

[19]  Y. Solyaev,et al.  DEPENDENCE OF GLARE DESTRUCTION MECHANISMS ON THE ELONGATION OF SAMPLES IN TESTS TO THREE-POINT FLEXURAL , 2020, Periódico Tchê Química.

[20]  Fatih Karadeniz,et al.  Design of a 4-DOF grounded exoskeletal robot for shoulder and elbow rehabilitation , 2020 .

[21]  E. Galkina,et al.  Quality Management and Sustainable Economic Development , 2020, Russian Engineering Research.

[22]  E. V. Akimov,et al.  Navigation Solution Concept and Its Practical Approach Development for Lunar Missions , 2020 .

[23]  A. Baibatsha.  GEOTECTONICS AND GEODYNAMICS OF PALEOZOIC STRUCTURES FROM THE PERSPECTIVE OF PLUME TECTONICS: A CASE OF KAZAKHSTAN , 2020 .

[24]  F. Findik,et al.  Selected ecological settlements , 2020 .

[25]  I. Cherunova,et al.  Treated Textile Electrostatic Properties Study , 2020 .

[26]  A. Muszyński,et al.  GEOLOGICAL-GEOPHYSICAL PROSPECTING INDICATORS OF THE ARGANATY DISTRICT PREDICTIVE BLOCKS (EASTERN BALKHASH , 2020 .

[27]  I. Kapitonov.  Development of low-carbon economy as the base of sustainable improvement of energy security , 2020, Environment, Development and Sustainability.

[28]  D. Topchiy,et al.  Systematization of Factors Affecting the Organizational Processes in the Conversion of Buildings , 2020, IOP Conference Series: Materials Science and Engineering.

[29]  Innar Sultangaliyeva,et al.  The influence of electromagnetic radiation of cell phones on the behavior of animals , 2020, Veterinary world.

[30]  Larysa Metelytsia,et al.  Design of (quinolin-4-ylthio)carboxylic acids as new Escherichia coli DNA gyrase B inhibitors: machine learning studies, molecular docking, synthesis and biological testing , 2020, Comput. Biol. Chem..

[31]  S. Laptev,et al.  Using the system-functional approach to assess the development of housing construction , 2020, E3S Web of Conferences.

[32]  R. Beisenova,et al.  Purification by Ketoconazole Adsorption from Sewage , 2020 .

[33]  L. Rabinskiy,et al.  PROPERTIES AND MICROSTRUCTURE OF AlSi10Mg SAMPLES OBTAINED BY SELECTIVE LASER MELTING , 2020 .

[34]  N. Fialko,et al.  The environmental reliability of gas-fired boiler units by applying modern heat-recovery technologies , 2020 .

[35]  A. Bieliatynskyi,et al.  The design of the length of the route transport stops’ landing pad on streets of the city , 2019, IOP Conference Series: Materials Science and Engineering.

[36]  Irina Cherunova,et al.  Geometric conditions of mathematical modeling of human heat exchange processes with the environment for CAD systems creating heat-shielding clothing , 2019, IOP Conference Series: Materials Science and Engineering.

[37]  I. Kapitonov.  Transformation of social environment in the application of alternative energy sources , 2019, Environment, Development and Sustainability.

[38]  A. A. Zotov,et al.  Designing and Calculation of Extruded Sections of an Inhomogeneous Composition , 2019 .

[39]  V. S. Zhamurova,et al.  Fatty Acid Composition And Biological Value of Milk of Holstein Cows at Different Lactation Seasons , 2019, Journal of Physics: Conference Series.

[40]  I. Kapitonov,et al.  ENERGY SECURITY OF TERRITORIES AS A FACTOR OF SUSTAINABLE DEVELOPMENT UNDER THE CONDITIONS OF ECONOMIC CHANGES , 2019, International Journal of Energy Economics and Policy.

[41]  G. M. Grigorenko,et al.  Structurization of Coatings in the Plasma Arc Spraying Process Using B4C + (Cr, Fe)7C3-Cored Wires , 2019, Powder Metallurgy and Metal Ceramics.

[42]  L. N. Rabinskii,et al.  3D Printing of Components for the Gas-Discharge Chamber of Electric Rocket Engines , 2019, Russian Engineering Research.

[43]  O. Tushavina,et al.  The use of jet penetrators for movement in the lunar soil , 2019, INCAS BULLETIN.

[44]  L. Rabinskiy,et al.  The dependence of the appearance of the aircraft on the conditions of the Arctic basing , 2019, INCAS BULLETIN.

[45]  Vladimir А. Zagovorchev,et al.  Selection of temperature and power parameters for multi-modular lunar jet penetrator , 2019, INCAS BULLETIN.

[46]  Y. Solyaev,et al.  Optimization of Thermal Protection Panels Subjected to Intense Heating and Mechanical Loading , 2019, Lobachevskii Journal of Mathematics.

[47]  I. Kapitonov,et al.  DEVELOPMENT OF DIGITAL ECONOMY IN THE ENERGY INDUSTRY-SPECIFIC MODERNIZATION , 2019, International Journal of Energy Economics and Policy.

[48]  Ali Abd Almisreb,et al.  DoS and DDoS vulnerability of IoT: A review , 2019, Sustainable Engineering and Innovation.

[49]  M. Ulewicz,et al.  Environmental aspects of heat recovery systems of boiler plants , 2019, E3S Web of Conferences.

[50]  N. Fialko,et al.  Reducing nitrogen oxide emissions in boilers at moistening of blowing air in heat recovery systems , 2019, E3S Web of Conferences.

[51]  L. Rabinskiy,et al.  INVESTIGATION OF PROCESSES OF DEFORMATION OF PLASTIC MATERIALS WITH THE HELP OF DIGITAL IMAGE PROCESSING , 2019, Periódico Tchê Química.

[52]  L. Rabinskiy,et al.  DESIGN CALCULATION TECHNIQUE FOR THICK-WALLED COMPOSITE CONSTRUCTIONS OPERATING UNDER HIGH-SPEED LOADING , 2019, Periódico Tchê Química.

[53]  L. Rabinskiy,et al.  ASSESSMENT OF DURABILITY OF COATINGS IN DIFFICULT STRESS CONDITIONS , 2019, Periódico Tchê Química.

[54]  I. Kapitonov.  Legal Support for Integration of Renewable Energy Sources in the Energy Law of the Countries from the International Legal Position , 2019 .

[55]  Z. Yang,et al.  Ground freezing impact on laterally loaded pile foundations considering strain rate effect , 2019, Cold Regions Science and Technology.

[56]  Dmitriy Topchiy,et al.  Unified classification of defects detected by the technical examination , 2019, E3S Web of Conferences.

[57]  I. Kapitonov.  Peculiarities of Applying the Theory of International Business by Russian Oil and Gas Companies , 2018, Space and Culture, India.

[58]  I. Cherunova,et al.  Development of the calculation method of polymer compound mass to be applied onto the textile garment pieces , 2018, IOP Conference Series: Materials Science and Engineering.

[59]  Irina Cherunova,et al.  Automation of Deformed Fibrous Materials Thermal Characteristics Accounting Process in Garments Production , 2018, 2018 International Russian Automation Conference (RusAutoCon).

[60]  Alla Merkulova,et al.  Development of Automation Algorithm for Step of Designing Technology of Static Electricity Protection Clothing , 2018, 2018 International Russian Automation Conference (RusAutoCon).

[61]  A Tokarskiy,et al.  Designing of structural and functional organizational systems, formed during the re-profiling of industrial facilities , 2018, IOP Conference Series: Materials Science and Engineering.

[62]  I. Dubina,et al.  Methodology for Assessing the Competitive Advantages of Agriculture in the Northern Regions of Kazakhstan , 2018 .

[63]  Xuyang Wu,et al.  A novel refrigerant system to reduce refreezing time of cast-in-place pile foundation in permafrost regions , 2018 .

[64]  I. Kapitonov,et al.  Competitiveness and Competitive Advantages of Enterprises in the Energy Sector , 2018 .

[65]  V. Sydorets,et al.  On the Thermal and Electrical Characteristics of the Hybrid Plasma-MIG Welding Process , 2017 .

[66]  V. Sydorets,et al.  Welding Technology in Additive Manufacturing Processes of 3D Objects , 2017 .

[67]  I. Pioro,et al.  CFD Study on Specifics of Flow and Heat Transfer in Vertical Bare Tubes Cooled With Water at Supercritical Pressures , 2017 .

[68]  V. Korzhyk,et al.  Analysis of the current state of additive welding technologies for manufacturing volume metallic products (review) , 2017 .

[69]  E. Lysenkov,et al.  Features of Thermal Conductivity of Composites Based on Thermoplastic Polymers and Aluminum Particles , 2017 .

[70]  X. Liu,et al.  New Equipment for Production of Super Hard Spherical Tungsten Carbide and other High-Melting Compounds Using the Method of Plasma Atomization of Rotating Billet , 2017 .

[71]  I. Pioro,et al.  Computer Simulation of Flow and Heat Transfer in Bare Tubes at Supercritical Parameters , 2016 .

[72]  O. Grishchenko,et al.  The Structure of the Share Capital and the Interests of the Majority Shareholder , 2016 .

[73]  Kasthurirangan Gopalakrishnan,et al.  Perspectives on using Basalt Fiber Filaments in the Construction and Rehabilitation of Highway Pavements and Airport Runways , 2016 .

[74]  V. Zubov,et al.  IDENTIFICATION OF KINETIC PARAMETERS OF THE MODEL OF INTERPHASE LAYER GROWTH IN A FIBROUS COMPOSITE , 2016 .

[75]  Katerina Krayushkina,et al.  Method of Increasing the Roughness of the Existing Road , 2016 .

[76]  Andrii Bieliatynskyi,et al.  Modern Technologies and Materials for Cement Concrete Pavement's Repair , 2016 .

[77]  Andrii Bieliatynskyi,et al.  Peculiarities of City Street-Road Network Modelling , 2016 .

[78]  Andrii Bieliatynskyi,et al.  The Different Methods of Displacement Monitoring at Loading Tests of Bridges or Different Structures , 2016 .

[79]  I. Krivtsun,et al.  Arc-Plasma Wire Spraying: An Optical Study of Process Phenomenology , 2015, Journal of Thermal Spray Technology.

[80]  I. Krivtsun,et al.  Simulation of Motion, Heating, and Breakup of Molten Metal Droplets in the Plasma Jet at Plasma-Arc Spraying , 2015, Journal of Thermal Spray Technology.

[81]  I. Krivtsun,et al.  Dynamic Model of the Wire Dispersion Process in Plasma-Arc Spraying , 2014, Journal of Thermal Spray Technology.

[82]  Olegas Prentkovskis,et al.  Methods for numerical calculation of parameters pertaining to the microscopic following-the-leader model of traffic flow: using the fast spline transformation , 2013 .

[83]  Wargha Peiman,et al.  Current Status and Future Applications of Supercritical Pressures in Power Engineering , 2012 .

[84]  U. Kaatze,et al.  Scaling function of critical binary mixtures: Nitrobenzene–n-hexane data revisited , 2012 .

[85]  Abdelmalek Bouazza,et al.  Technological advances and applications of geothermal energy pile foundations and their feasibility in Australia , 2010 .

[86]  Olegas Prentkovskis,et al.  A Study of the Deflections of Metal Road Guardrail Post , 2010 .

[87]  M. Zavhorodnii,et al.  [Dependence of biological activity of N-acyl derivates of 6-alkoxy-2-methyl-4-mercaptoquinoline on the nature of substituents in the position 6 of the heterocycle]. , 2010, Ukrains'kyi biokhimichnyi zhurnal.

[88]  V. Zhovtyansky,et al.  Electric arc steam plasma conversion of medicine waste and carbon containing materials , 2008, 2008 17th International Conference on Gas Discharges and Their Applications.

[89]  N. M. Fialko,et al.  Effective method for construction of low-dimensional models for heat transfer process , 2004 .

[90]  U. Kaatze,et al.  Dynamic scaling in the ultrasonic attenuation spectra of critical binary mixtures , 2000 .

[91]  Y. Borisov,et al.  Effect of coating porosity on the process of heat transfer with gas-thermal deposition , 1993 .

[92]  E. A. Astakhov,et al.  Structure and properties of gas-thermal coatings of Fe-B-C and Fe-Ti-B-C alloys , 1987 .

[93]  N. I. Kobasko,et al.  Numerical determination of the duration of the nucleate-boiling phase in the course of steel-plate hardening , 1984 .

[94]  H. Weller.  Building with Lime , 1943 .