Ionic Polymer-metal Composites for Underwater Operation

The ionic polymer-metal composite (IPMC) for flexible hydrodynamic propulsor blades can provide many new opportunities in navy platforms, especially in unmanned, robotic vehicles used in surveillance and combat. When in operation, the IPMC materials are very quiet since they have no vibration causing components, i.e., gears, motors, shafts, etc. For small autonomous underwater vehicles (AUV), this feature is truly attractive. IPMCs are friendly to solid-state electronics and have digital programming capabilities; thus, active control is possible. Another advantage of these materials is that they can be operational in a self-oscillatory manner. However, there are several issues that still need to be addressed: propulsor design, testing, robotic control, and the theoretical modeling of the appropriate design. Currently, the IPMC is being investigated for propulsor blade applications and a propulsor model with a robust control scheme. An analytical model of a segmented IPMC propulsor was formulated to be a building block for accommodating the relaxation behavior of IPMCs and for describing the dynamics of the flexible IPMC bending actuator.

[1]  Kwang J. Kim,et al.  Low temperature characteristics of ionic polymermetal composite actuators , 2005 .

[2]  Kinji Asaka,et al.  Bending of polyelectrolyte membrane platinum composites by electric stimuli. Part II. Response kinetics , 2000 .

[3]  Kwang J. Kim,et al.  An Equivalent Circuit Model for Ionic Polymer-Metal Composites and their Performance Improvement by a Clay-Based Polymer Nano-Composite Technique , 2003 .

[4]  K. Kim,et al.  A novel method of manufacturing three-dimensional ionic polymer–metal composites (IPMCs) biomimetic sensors, actuators and artificial muscles , 2002 .

[5]  Mohsen Shahinpoor,et al.  Ionic polymer–metal composites: III. Modeling and simulation as biomimetic sensors, actuators, transducers, and artificial muscles , 2004 .

[6]  K. Kim,et al.  The effect of surface-electrode resistance on the performance of ionic polymer-metal composite (IPMC) artificial muscles , 2000 .

[7]  J.W. Paquette,et al.  Ionomeric electroactive polymer artificial muscle for naval applications , 2004, IEEE Journal of Oceanic Engineering.

[8]  K. Kim,et al.  Ionic polymer–metal composites: IV. Industrial and medical applications , 2005 .

[9]  Mohsen Shahinpoor,et al.  Mechanoelectric effects in ionic gels , 2000 .

[10]  K. Kim,et al.  Ionic polymer-metal composites: I. Fundamentals , 2001 .

[11]  Donald J. Leo,et al.  Feedback control of the bending response of ionic polymer-metal composite actuators , 2001, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[12]  Mohsen Shahinpoor,et al.  Mass Transfer Induced Hydraulic Actuation in Ionic Polymer-Metal Composites , 2002 .

[13]  S. Abdel-Khalik,et al.  Modeling the transport processes within multichannel molten carbonate fuel cells , 2003 .

[14]  K. Kim,et al.  Ionic polymer–metal composites: II. Manufacturing techniques , 2003 .

[15]  Promode R. Bandyopadhyay,et al.  A Biomimetic Propulsor for Active Noise Control: Experiments , 2002 .

[16]  Yoseph Bar-Cohen,et al.  Measurements and macro models of ionomeric polymer-metal composites (IPMC) , 2002, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[17]  Woosoon Yim,et al.  The Behavior of Ionic Polymer-Metal Composites in a Multi-Layer Configuration , 2005 .

[18]  Woosoon Yim,et al.  Adaptive control of projectile fin angle using piezoelectric beam actuator , 2004, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[19]  Mohsen Shahinpoor,et al.  Effective diffusivity of nanoscale ion–water clusters within ion-exchange membranes determined by a novel mechano-electrical technique , 2003 .

[20]  Hubert H. Girault,et al.  Coplanar Interdigitated Band Electrodes for Electrosynthesis Part 4 : Application to Sea Water Electrolysis , 1998 .