Identification and Control of an Industrial Thickener Using Historical Data

In the mining industry, thickeners are used to increase density of slurries by removing water. When a thickener is in operation, the underflow slurry density should follow a given setpoint and stay inside a boundary layer. In general, thickeners are manually controlled. However, industrial experience has shown that manual control is not sufficient. For this reason, an advanced process control strategy is proposed in this paper. On the one hand, using historical data, a linear dynamic model of the studied thickener is developed. In this regard, data is collected, prepared, and data informativity is studied to ensure model identifiability and interpretability. On the other hand, a model predictive control is designed to control the process by manipulating the feed and the underflow slurry flowrates. The simulation results show that the method can be successfully used to control the underflow slurry density in the presence of feed variations and unmeasured disturbances.

[1]  Kim-Chuan Toh,et al.  On the Implementation and Usage of SDPT3 – A Matlab Software Package for Semidefinite-Quadratic-Linear Programming, Version 4.0 , 2012 .

[2]  Lennart Ljung,et al.  System Identification: Theory for the User , 1987 .

[3]  Tianyou Chai,et al.  An intelligent switching control for a mixed separation thickener process , 2016 .

[4]  Felipe Núñez,et al.  Neural Network-Based Model Predictive Control of a Paste Thickener Over an Industrial Internet Platform , 2020, IEEE Transactions on Industrial Informatics.

[5]  Lana E. Melkumova,et al.  Comparing Ridge and LASSO estimators for data analysis , 2017 .

[6]  Román Salmerón-Gómez,et al.  Transformation of variables and the condition number in ridge estimation , 2018, Comput. Stat..

[7]  Luis Bergh,et al.  Expert Control Tuning of an Industrial Thickener , 2015 .

[8]  Xavier Bombois,et al.  Data informativity for the open-loop identification of MIMO systems in the prediction error framework , 2020, Autom..

[9]  Daniel Sbarbaro,et al.  On the control of sludge level and underflow concentration in industrial thickeners , 2011 .

[10]  Stephen J. Wright.  Efficient Convex Optimization for Linear MPC , 2018, Handbook of Model Predictive Control.

[11]  M. Eichler.  Causal inference in time series analysis , 2012 .

[12]  Ning Xu,et al.  An intelligent control strategy for thickening process , 2015 .

[13]  R. Salmerón,et al.  Variance Inflation Factor and Condition Number in multiple linear regression , 2018 .

[14]  Jie Bao,et al.  Model Predictive Control of a Paste Thickener in Coal Handling and Preparation Plants , 2013 .

[15]  Hong Wang,et al.  An Intelligent Switching Control for the Intervals of Concentration and Flow-rate of Underflow Slurry in a Mixed Separation Thickener , 2014 .

[16]  Jie Bao,et al.  Studies on parameter estimation and model predictive control of paste thickeners , 2015 .

[17]  Jie Bao,et al.  A study on model predictive control in paste thickeners with rake torque constraint , 2017 .

[18]  D. C. Dixon.  Capacity and control of clarifiers and thickeners , 1985 .