Thermal modeling, exergy analysis, performance of BIPV and BIPVT: A review
暂无分享,去创建一个
[1] Ursula Eicker,et al. Solar technologies for buildings , 2003 .
[2] Siddig Omer,et al. Advancements in hybrid photovoltaic systems for enhanced solar cells performance , 2015 .
[3] Xingxing Zhang,et al. Review of R&D progress and practical application of the solar photovoltaic/thermal (PV/T) technologies. , 2012 .
[4] Ewa Radziemska,et al. Performance Analysis of a Photovoltaic-Thermal Integrated System , 2009 .
[5] G. Vokas,et al. Hybrid photovoltaic–thermal systems for domestic heating and cooling—A theoretical approach , 2006 .
[6] Jie Ji,et al. Comparative experiment study on photovoltaic and thermal solar system under natural circulation of water , 2011 .
[7] Ellen G. Brehob,et al. Simulated and experimental performance of a heat pipe assisted solar wall , 2012 .
[8] Eric Savory,et al. Energy modeling of photovoltaic thermal systems with corrugated unglazed transpired solar collectors – Part 1: Model development and validation , 2014 .
[9] Kamaruzzaman Sopian,et al. Efficiencies and improvement potential of building integrated photovoltaic thermal (BIPVT) system , 2014 .
[10] Jayanta Deb Mondol,et al. Modelling and simulation of Building-Integrated solar thermal systems: Behaviour of the system , 2015 .
[11] Antonio Campo,et al. EXPERIMENTAL-BASED CORRELATIONS FOR THE CHARACTERIZATION OF FREE CONVECTION OF AIR INSIDE ISOSCELES TRIANGULAR CAVITIES WITH VARIABLE APEX ANGLES , 2005 .
[12] Marco Beccali,et al. Use of finite element models for estimating thermal performance of façade-integrated solar thermal collectors , 2016 .
[13] Guohui Gan,et al. Numerical determination of adequate air gaps for building-integrated photovoltaics , 2009 .
[14] Tin-Tai Chow,et al. A Review on Photovoltaic/Thermal Hybrid Solar Technology , 2010, Renewable Energy.
[15] Ankita Gaur,et al. Analytical expressions for temperature dependent electrical efficiencies of thin film BIOPVT systems , 2015 .
[16] Monika Woloszyn,et al. Three-dimensional simulation with a CFD tool of the airflow phenomena in single floor double-skin facade equipped with a venetian blind , 2005 .
[17] Keith Emery,et al. Spectral effects on PV-device rating , 1992 .
[18] Gilles Notton,et al. New Patented Solar Thermal Concept for High Building Integration: Test and Modeling , 2013 .
[19] W. Sprenger. Electricity yield simulation of complex BIPV systems , 2013 .
[20] Tapas K. Mallick,et al. Enhancing the performance of building integrated photovoltaics , 2011 .
[21] Michele De Carli,et al. Evaluation of various CFD modelling strategies in predicting airflow and temperature in a naturally ventilated double skin façade , 2011 .
[22] E. Akpinar,et al. Drying of mint leaves in a solar dryer and under open sun: modelling, performance analyses. , 2010 .
[23] Ying Huang,et al. Building-integrated photovoltaics (BIPV) in architectural design in China , 2011 .
[24] Vishal Verma,et al. Performance Enhancement of Building Integrated Photovoltaic Module using Thermoelectric Cooling , 2013 .
[25] Mervyn Smyth,et al. Long-term validated simulation of a building integrated photovoltaic system , 2005 .
[26] E. Blanco,et al. Energy performance of an open-joint ventilated façade compared with a conventional sealed cavity façade , 2011 .
[27] Arvind Tiwari,et al. Performance evaluation of solar PV/T system: An experimental validation , 2006 .
[28] B. von Roedern,et al. Thin-Film Si:H-Based Solar Cells , 2008, Renewable Energy.
[29] P. Amparo López-Jiménez,et al. Thermal behavior analysis of different multilayer façade: Numerical model versus experimental prototype , 2014 .
[30] Koray Ulgen,et al. An approach for energy modeling of a building integrated photovoltaic (BIPV) Trombe wall system , 2013 .
[31] Seunghwan Yoo,et al. Simulation for an optimal application of BIPV through parameter variation , 2011 .
[32] Michaël Kummert,et al. Cost-benefit analysis of integrating BIPV-T air systems into energy-efficient homes , 2016 .
[33] S. C. Solanki,et al. Photovoltaic modules and their applications: A review on thermal modelling , 2011 .
[34] Gilles Notton,et al. Life cycle analysis of a building-integrated solar thermal collector, based on embodied energy and embodied carbon methodologies , 2014 .
[35] M. Green. Solar Cells : Operating Principles, Technology and System Applications , 1981 .
[36] Andreas K. Athienitis,et al. A Study of Design Options for a Building Integrated Photovoltaic/thermal (BIPV/T) System with Glazed Air Collector and Multiple Inlets , 2014 .
[37] K. Sopian,et al. Performance and cost benefits analysis of double-pass solar collector with and without fins , 2013 .
[38] Andreas K. Athienitis,et al. A Study of Design Options for a Building Integrated Photovoltaic/thermal (BIPV/T) System with Glazed Air Collector and Multiple Inlets , 2012 .
[39] R. Mishra,et al. Energy matrices analyses of hybrid photovoltaic thermal (HPVT) water collector with different PV technology , 2013 .
[40] Kamaruzzaman Sopian,et al. Energy analysis and improvement potential of finned double-pass solar collector , 2013 .
[41] Mike Duke,et al. Estimation of photovoltaic conversion efficiency of a building integrated photovoltaic/thermal (BIPV/T) collector array using an artificial neural network , 2012 .
[42] Andreas K. Athienitis,et al. Numerical and Experimental Study of Heat Transfer in a BIPV-Thermal System , 2007 .
[43] S. K. Tyagi,et al. Recent advances in solar photovoltaic systems for emerging trends and advanced applications , 2016 .
[44] Jong-ho Yoon,et al. Practical application of building integrated photovoltaic (BIPV) system using transparent amorphous silicon thin-film PV module , 2011 .
[45] Fangliang Chen,et al. Fabrication and laboratory-based performance testing of a building-integrated photovoltaic-thermal roofing panel , 2016 .
[46] K. F. Fong,et al. Annual performance of building-integrated photovoltaic/water-heating system for warm climate application , 2009 .
[47] G. N. Tiwari,et al. Optimizing the energy and exergy of building integrated photovoltaic thermal (BIPVT) systems under cold climatic conditions , 2010 .
[48] Melissa M. Bilec,et al. Design and zonal building energy modeling of a roof integrated solar chimney , 2013 .
[49] Francesco Calise,et al. BIPVT systems for residential applications: An energy and economic analysis for European climates , 2016 .
[50] Prashant Baredar,et al. Comparison of BIPV and BIPVT: A review , 2017, Resource-Efficient Technologies.
[51] Arvind Tiwari,et al. Exergy analysis of integrated photovoltaic thermal solar water heater under constant flow rate and constant collection temperature modes , 2009 .
[52] David Moser,et al. BiPV System Performance and Efficiency Drops: Overview on PV Module Temperature Conditions of Different Module Types , 2014 .
[53] Durg Singh Chauhan,et al. A Novel investigation of building integrated photovoltaic thermal (BiPVT) system: A comparative study , 2016 .
[54] Jianhui Hu,et al. Experimental studies on summer performance and feasibility of a BIPV/T ethylene tetrafluoroethylene (ETFE) cushion structure system , 2014 .
[55] F. Haghighat,et al. Modeling ventilated double skin façade—A zonal approach , 2008 .
[56] Jun-Gu Kang,et al. Experimental Performance of Heating System with Building-integrated PVT (BIPVT) Collector , 2014 .
[57] Gilles Notton,et al. A building integrated solar collector: Performances characterization and first stage of numerical calculation , 2013 .
[58] A. Johary,et al. Heat Transfer During Wind Flow over Rectangular Bodies in the Natural Environment , 1981 .
[59] L. Aelenei,et al. Innovative solutions for net zero-energy building: BIPV-PCM system - Modeling, design and thermal performance , 2013, 2013 4th International Youth Conference on Energy (IYCE).
[60] G. N. Tiwari,et al. Energy and exergy analysis of a building integrated semitransparent photovoltaic thermal (BISPVT) system , 2012 .
[61] H. Manz,et al. Available remodeling simulation for a BIPV as a shading device , 2011 .
[62] Isabel Pérez-Grande,et al. Influence of glass properties on the performance of double-glazed facades , 2005 .
[63] Bengt Perers,et al. Performance of a multifunctional PV/T hybrid solar window , 2010 .
[64] Andreas K. Athienitis,et al. Investigation of the Thermal Performance of a Passive Solar Test-Room with Wall Latent Heat Storage , 1997 .
[65] Fang Tang,et al. Performance evaluations and applications of photovoltaic–thermal collectors and systems , 2014 .
[66] Sujata Nayak,et al. Energy and exergy analysis of photovoltaic/thermal integrated with a solar greenhouse , 2008 .
[67] Eduard Egusquiza,et al. Performance and influence of numerical sub-models on the CFD simulation of free and forced convection in double-glazed ventilated façades , 2008 .
[68] Seishiro Mizukami,et al. Experimental investigation on generated power of amorphous PV module for roof azimuth , 2001 .
[69] Samar Jaber,et al. Optimum design of Trombe wall system in mediterranean region , 2011 .