Experimental Investigations of Fused Filament Fabrication for Applications to Affordable Scientific Hardware

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvii

[1]  Joshua M. Pearce,et al.  3-D Printing of Open Source Appropriate Technologies for Self-Directed Sustainable Development , 2010, Journal of Sustainable Development.

[2]  Craig Alexander Holdaway.  Automation of pollen analysis using a computer microscope : a thesis presented in partial fulfilment of the requirements for the degree of Master of Engineering in Computer Systems Engineering at Massey University , 2004 .

[3]  Joshua M. Pearce,et al.  Open-Source 3-D Platform for Low-Cost Scientific Instrument Ecosystem , 2016, Journal of laboratory automation.

[4]  Daniel Güllmar,et al.  3D printing of MRI compatible components: why every MRI research group should have a low-budget 3D printer. , 2014, Medical engineering & physics.

[5]  Kara L Nelson,et al.  Assessment of a low-cost, point-of-use, ultraviolet water disinfection technology. , 2008, Journal of water and health.

[6]  Scott Davidson,et al.  Open-source hardware , 2004, IEEE Des. Test Comput..

[7]  Eric A. von Hippel,et al.  How Open Source Software Works: 'Free' User-to-User Assistance? , 2000 .

[8]  Chul B. Park,et al.  Poly(lactic acid) crystallization , 2012 .

[9]  D. Hongve,et al.  Comparison of nephelometric turbidity measurements using wavelengths 400–600 and 860 nm , 1998 .

[10]  Parisa Eslambolchilar,et al.  Open-source hardware for medical devices , 2016, BMJ Innovations.

[11]  Joshua M. Pearce,et al.  Multi-material additive and subtractive prosumer digital fabrication with a free and open-source convertible delta RepRap 3-D printer , 2015 .

[12]  Joshua M. Pearce.  Quantifying the Value of Open Source Hardware Development , 2014, Modern Economy.

[13]  B ShortDaniel,et al.  Use of 3D Printing by Museums: Educational Exhibits, Artifact Education, and Artifact Restoration , 2015 .

[14]  Joshua M. Pearce,et al.  Open-source, self-replicating 3-D printer factory for small-business manufacturing , 2016 .

[15]  Petr Grau.  Low cost wastewater treatment , 1996 .

[16]  Adam Spencer,et al.  Open source and DIY hardware for DNA nanotechnology labs. , 2015, Journal of biological methods.

[17]  Cheng-Kuan Su,et al.  Three-dimensional printed sample load/inject valves enabling online monitoring of extracellular calcium and zinc ions in living rat brains. , 2014, Analytica chimica acta.

[18]  Kevin G McGuigan,et al.  Solar disinfection of drinking water and diarrhoea in Maasai children: a controlled field trial , 1996, The Lancet.

[19]  Kazuo Yamamoto,et al.  A low cost technique of arsenic removal from drinking water by coagulation using ferric chloride salt and alum , 2002 .

[20]  Magnus Bergquist,et al.  A Historical Account of the Value of Free and Open Source Software: From Software Commune to Commercial Commons , 2011, OSS.

[21]  Joshua M. Pearce.  Open-Source Lab: How to Build Your Own Hardware and Reduce Research Costs , 2013 .

[22]  David N Mastronarde,et al.  Automated electron microscope tomography using robust prediction of specimen movements. , 2005, Journal of structural biology.

[23]  Eleanor J. Sullivan.  A revolution in the making , 1995 .

[24]  Joshua M. Pearce.  Applications of Open Source 3-D Printing on Small Farms , 2015 .

[25]  Joshua M. Pearce,et al.  Open-Source 3D-Printable Optics Equipment , 2013, PloS one.

[26]  David G. Pisano,et al.  iMSRC: converting a standard automated microscope into an intelligent screening platform , 2015, Scientific Reports.

[27]  Ye Jin,et al.  A model research for prototype warp deformation in the FDM process , 2007 .

[28]  Johannes E. Schindelin,et al.  The ImageJ ecosystem: An open platform for biomedical image analysis , 2015, Molecular reproduction and development.

[29]  C. L. Ventola.  Medical Applications for 3D Printing: Current and Projected Uses. , 2014, P & T : a peer-reviewed journal for formulary management.

[30]  Joshua M. Pearce.  Open-source nanotechnology: Solutions to a modern intellectual property tragedy , 2013 .

[31]  Johan Sderberg,et al.  Hacking Capitalism: The Free and Open Source Software Movement , 2007 .

[32]  Joshua M. Pearce,et al.  Substrate release mechanisms for gas metal arc weld 3D aluminum metal printing , 2014 .

[33]  Jeffrey M. Voas,et al.  Free and Open Source Software , 2009 .

[34]  R M Conroy,et al.  Solar disinfection of drinking water protects against cholera in children under 6 years of age , 2001, Archives of disease in childhood.

[35]  Fadi P. Deek,et al.  Open Source: Technology and Policy , 2007 .

[36]  Aneta Duda,et al.  3D PRINTERS – NEW POSSIBILITIES IN EDUCATION , 2014 .

[37]  Robert Winkler,et al.  'Plug and Play' assembly of a low-temperature plasma ionization mass spectrometry imaging (LTP-MSI) system. , 2014, Journal of proteomics.

[38]  Joshua M. Pearce,et al.  Building Research Equipment with Free, Open-Source Hardware , 2012, Science.

[39]  Joshua M. Pearce,et al.  Open-Source Wax RepRap 3-D Printer for Rapid Prototyping Paper-Based Microfluidics , 2016, Journal of laboratory automation.

[40]  Thomas Birtchnell,et al.  3D Printing for Development in the Global South: The 3D4D Challenge , 2014 .

[41]  Steven Weber,et al.  The Success of Open Source , 2004 .

[42]  Donald Garlotta,et al.  A Literature Review of Poly(Lactic Acid) , 2001 .

[43]  C Newton,et al.  Recirculating gravel filters: high-performance treatment at low cost for two small communities. , 2008, Water science and technology : a journal of the International Association on Water Pollution Research.

[44]  Erik Stokstad,et al.  Network science. Open-source ecology takes root across the world. , 2011, Science.

[45]  P. Pagès,et al.  Processing of poly(lactic acid): characterization of chemical structure, thermal stability and mechanical properties , 2010 .

[46]  Lucia L. Prieto-Godino,et al.  Open Labware: 3-D Printing Your Own Lab Equipment , 2015, PLoS biology.

[47]  Joshua M. Pearce,et al.  Optimizing the solar water disinfection (SODIS) method by decreasing turbidity with NaCl , 2012 .

[48]  Bryan Randolph Bruns,et al.  Open Sourcing Nanotechnology Research and Development: Issues and Opportunities , 2001 .

[49]  Jon M. Houck,et al.  CACTI: Free, Open-Source Software for the Sequential Coding of Behavioral Interactions , 2012, PloS one.

[50]  Adrian Bowyer,et al.  RepRap: The Replicating Rapid Prototyper: Maximizing Customizability by Breeding the Means of Production , 2010 .

[51]  Thomas Scheper,et al.  3D‐printed individual labware in biosciences by rapid prototyping: A proof of principle , 2015 .

[52]  J. Dambre,et al.  Neural network for blood cell classification in a holographic microscopy system , 2015, 2015 17th International Conference on Transparent Optical Networks (ICTON).

[53]  R M Conroy,et al.  Solar disinfection of water reduces diarrhoeal disease: an update , 1999, Archives of disease in childhood.

[54]  Rhys Jones,et al.  RepRap – the replicating rapid prototyper , 2011, Robotica.

[55]  G. Gage,et al.  The SpikerBox: A Low Cost, Open-Source BioAmplifier for Increasing Public Participation in Neuroscience Inquiry , 2012, PloS one.

[56]  R. Meierhofer,et al.  Health gains from solar water disinfection (SODIS): evaluation of a water quality intervention in Yaoundé, Cameroon. , 2010, Journal of water and health.

[57]  Lee Tin Sin,et al.  Polylactic Acid: PLA Biopolymer Technology and Applications , 2012 .

[58]  Alberto Valero-Gomez,et al.  A New Open Source 3D-Printable Mobile Robotic Platform for Education , 2012 .

[59]  Q. Mahmood,et al.  Development of low cost household drinking water treatment system for the earthquake affected communities in Northern Pakistan , 2011 .

[60]  John Irwin,et al.  Life-cycle economic analysis of distributed manufacturing with open-source 3-D printers , 2013, Mechatronics.

[61]  Jeremy J. Baumberg,et al.  A one-piece 3D printed microscope and flexure translation stage , 2015 .

[62]  James Clements,et al.  Foldscope: Origami-Based Paper Microscope , 2014, PloS one.

[63]  P. Gruber,et al.  Polylactic Acid Technology , 2000 .

[64]  Paul G. McMenamin,et al.  Emerging Applications of Bedside 3D Printing in Plastic Surgery , 2015, Front. Surg..

[65]  Joshua M. Pearce,et al.  Mobile Open-Source Solar-Powered 3-D Printers for Distributed Manufacturing in Off-Grid Communities , 2014 .

[66]  Johannes E. Schindelin,et al.  TrakEM2 Software for Neural Circuit Reconstruction , 2012, PloS one.

[67]  Miklas Scholz,et al.  Application of solar disinfection for treatment of contaminated public water supply in a developing country: field observations. , 2013, Journal of water and health.

[68]  Joshua M. Pearce,et al.  Free and open-source control software for 3-D motion and processing , 2016 .

[69]  Richard W. Hamming,et al.  Error detecting and error correcting codes , 1950 .

[70]  Egon Villumsen,et al.  An open source hardware-based mechatronics project: The replicating rapid 3-D printer , 2011, 2011 4th International Conference on Mechatronics (ICOM).

[72]  J. J. Simonis,et al.  Manufacture of a low-cost ceramic microporous filter for the elimination of microorganisms causing common diseases , 2013 .

[73]  Joshua M. Pearce,et al.  Distributed manufacturing with 3-D printing: a case study of recreational vehicle solar photovoltaic mounting systems , 2015 .

[74]  Catarina Mota,et al.  The rise of personal fabrication , 2011, C&C '11.

[75]  J. Herbsleb,et al.  Two case studies of open source software development: Apache and Mozilla , 2002, TSEM.

[76]  Tim Caffrey,et al.  Wohlers report 2013 : additive manufacturing and 3D printing state of the industry : annual worldwide progress report , 2013 .

[77]  Joshua M. Pearce,et al.  Open-Source Syringe Pump Library , 2014, PloS one.

[78]  P. Azimi,et al.  Ultrafine particle emissions from desktop 3D printers , 2013 .

[79]  David Bulnes-Abundis,et al.  3D‐printed individual labware in biosciences by rapid prototyping: In vitro biocompatibility and applications for eukaryotic cell cultures , 2015 .

[80]  Joshua M. Pearce,et al.  Open-Source 3-D Printing Technologies for Education: Bringing Additive Manufacturing to the Classroom , 2015, J. Vis. Lang. Comput..

[81]  Joshua M. Pearce,et al.  The RepRap 3-D Printer Revolution in STEM Education , 2014 .

[82]  Joshua M. Pearce,et al.  Open-Source Colorimeter , 2013, Sensors.

[83]  Peter H. Schultz,et al.  Printing Space: Using 3D Printing of Digital Terrain Models in Geosciences Education and Research , 2014 .

[84]  BowyerAdrian,et al.  3D Printing and Humanity's First Imperfect Replicator , 2014 .

[85]  B. Kogut,et al.  Open-source Software Development and Distributed Innovation , 2001 .

[86]  Steven L. Goldman.  Reinventing Discovery: The New Era of Networked Science , 2014 .

[87]  Daniel Kahn,et al.  An Affordable Open-Source Turbidimeter , 2014, Sensors.

[88]  Tatjana Dostalova,et al.  Possibility of reconstruction of dental plaster cast from 3D digital study models , 2013, Biomedical engineering online.

[89]  Joshua M. Pearce.  The case for open source appropriate technology , 2012, Environment, Development and Sustainability.

[90]  Mark D Sobsey,et al.  Microbiological effectiveness of locally produced ceramic filters for drinking water treatment in Cambodia. , 2010, Journal of water and health.

[91]  Bethany C Gross,et al.  Evaluation of 3D printing and its potential impact on biotechnology and the chemical sciences. , 2014, Analytical chemistry.

[92]  Joshua M. Pearce,et al.  Total U.S. cost evaluation of low-weight tension-based photovoltaic flat-roof mounted racking , 2015 .

[93]  Liu Xinhua,et al.  An investigation on distortion of PLA thin-plate part in the FDM process , 2015 .

[94]  Matheus Carvalho de Carvalho,et al.  A low cost, easy to build, portable, and universal autosampler for liquids , 2013 .

[95]  Hermann Seitz,et al.  Fabrication of biodegradable, porous scaffolds using a low-cost 3D printer , 2014 .

[96]  Joshua M. Pearce,et al.  Evaluating the geographic viability of the solar water disinfection (SODIS) method by decreasing turbidity with NaCl: A case study of South Sudan , 2014 .

[97]  Peter G. Schultz,et al.  Meister Antimalarial Drug Discovery Liver Stages to Drive Next-Generation Plasmodium Imaging of , 2012 .

[98]  U. Liebel,et al.  Generation of orientation tools for automated zebrafish screening assays using desktop 3D printing , 2014, BMC Biotechnology.

[99]  R. Buamah,et al.  Adsorption of fluoride from aqueous solution using low cost adsorbent , 2013 .

[100]  M. Chopra,et al.  Diarrhoea: why children are still dying and what can be done , 2010, The Lancet.

[101]  Isaac CH Fung,et al.  Water, sanitation and hygiene for the prevention of diarrhoea , 2010, International journal of epidemiology.

[102]  Lucia Gauchia,et al.  High-Efficiency Solar-Powered 3-D Printers for Sustainable Development , 2016 .

[103]  Chua Chee Kai,et al.  Rapid prototyping issues in the 21st century , 1999 .

[104]  Satya N. Atluri,et al.  A Meshless Local Petrov-Galerkin Method for Solving the Bending Problem of a Thin Plate , 2002 .

[105]  Joshua M. Pearce.  Return on investment for open source scientific hardware development , 2016 .

[106]  Joshua M. Pearce,et al.  Open-source mobile water quality testing platform , 2014 .

[107]  Joshua M. Pearce,et al.  The effects of PLA color on material properties of 3-D printed components , 2015 .

[108]  Joshua M. Pearce.  Laboratory equipment: Cut costs with open-source hardware , 2014, Nature.

[109]  Souheng Wu.  Polymer Interface and Adhesion , 2017 .

[110]  Bridget M Kuehn.  Clinicians Embrace 3D Printers to Solve Unique Clinical Challenges. , 2016, JAMA.

[111]  María del Mar Espinosa,et al.  Bricking: A New Slicing Method to Reduce Warping , 2015 .

[112]  Joshua M. Pearce,et al.  Open Design-Based Strategies to Enhance Appropriate Technology Development , 2010 .

[113]  Wolfgang Christian,et al.  Open Source Physics , 2011, Science.

[114]  J. Kruth,et al.  Residual stresses in selective laser sintering and selective laser melting , 2006 .

[115]  S. Ameer-Beg,et al.  The Gray Institute ‘open’ high-content, fluorescence lifetime microscopes , 2013, Journal of microscopy.

[116]  Joshua M. Pearce,et al.  A Low-Cost Open-Source Metal 3-D Printer , 2013, IEEE Access.

[117]  Daniel A. Fletcher,et al.  Point-of-care quantification of blood-borne filarial parasites with a mobile phone microscope , 2015, Science Translational Medicine.

[118]  Jurgen A Riedl,et al.  Interlaboratory Reproducibility of Blood Morphology Using the Digital Microscope , 2015, Journal of laboratory automation.

[119]  D. Sandham.  A revolution in the making? [WiMax standards] , 2006 .

[120]  Luigi Vanfretti,et al.  The OpenPMU Platform for Open-Source Phasor Measurements , 2013, IEEE Transactions on Instrumentation and Measurement.

[121]  J. Nesland,et al.  Use of automated microscopy for the detection of disseminated tumor cells in bone marrow samples. , 2001, Cytometry.

[122]  Joshua M. Pearce,et al.  Viability of Small-Scale Arsenic-Contaminated Water Purification Technologies for Sustainable Development in Pakistan , 2011 .

[123]  J. Potash,et al.  Effects of improved water supply and sanitation on ascariasis, diarrhoea, dracunculiasis, hookworm infection, schistosomiasis, and trachoma. , 1991, Bulletin of the World Health Organization.

[124]  Hong Jiao,et al.  Getting started with open‐hardware: Development and control of microfluidic devices , 2014, Electrophoresis.

[125]  Trudie Lang,et al.  Advancing Global Health Research Through Digital Technology and Sharing Data , 2011, Science.

[126]  Jaques Reifman,et al.  AGeS: A Software System for Microbial Genome Sequence Annotation , 2011, PloS one.

[127]  Matthew H Todd,et al.  Open science is a research accelerator. , 2011, Nature chemistry.