Experimental analysis and computational modelling of damage and fracture
暂无分享,去创建一个
[1] J. Karger‐Kocsis,et al. Comparison of the failure mode in short and long glass fiber-reinforced injection-molded polypropylene composites by acoustic emission , 1993 .
[2] D. A. Dillard,et al. Embedded piezoelectric sensors to measure peel stresses in adhesive joints , 1994 .
[3] Fu-Pen Chiang,et al. Moiré methods of strain analysis , 1979 .
[4] Hans Muhlhaus,et al. A variational principle for gradient plasticity , 1991 .
[5] K A Stetson,et al. Heterodyne readout of specklegram halo interference fringes. , 1980, Applied optics.
[6] J. Mazars. APPLICATION DE LA MECANIQUE DE L'ENDOMMAGEMENT AU COMPORTEMENT NON LINEAIRE ET A LA RUPTURE DU BETON DE STRUCTURE , 1984 .
[7] K. Friedrich,et al. Fracture toughness and fatigue crack propagation of single fibre-bundle reinforced model composites , 1987 .
[8] M. J. Clarke,et al. A study of incremental-iterative strategies for non-linear analyses , 1990 .
[9] A Macovski,et al. Time-lapse interferometry and contouring using television systems. , 1971, Applied optics.
[10] E. Dvorkin,et al. Finite elements with displacement interpolated embedded localization lines insensitive to mesh size and distortions , 1990 .
[11] Z. Bažant,et al. Nonlocal Continuum Damage, Localization Instability and Convergence , 1988 .
[12] Gouri Dhatt,et al. Incremental displacement algorithms for nonlinear problems , 1979 .
[13] R. Rowlands,et al. Determination of individual stresses thermoelastically , 1990 .
[14] M. S. Dadkhah,et al. Direct Measurement of Transformation Zone Strains in Toughened Zirconia , 1991 .
[15] Zdeněk P. Bažant,et al. Comparison of various models for strain‐softening , 1988 .
[16] Heinz Zamzow,et al. Hentschel random access tracking system HSG 84.30 , 1990, Other Conferences.
[17] M. Crisfield. A FAST INCREMENTAL/ITERATIVE SOLUTION PROCEDURE THAT HANDLES "SNAP-THROUGH" , 1981 .
[18] Y. Y. Zhu,et al. A fully coupled elasto-visco-plastic damage theory for anisotropic materials , 1995 .
[19] G. Papadopoulos. Fracture Mechanics: The Experimental Method of Caustics and the Det.-Criterion of Fracture , 1996 .
[20] R. Borst,et al. On Gradient-Enhanced Damage Theories , 1997 .
[21] J. Williams,et al. European group on fracture: Kc and Gc methods for polymers , 1990 .
[22] J. Lemaitre,et al. Mécanique des matériaux solides , 1996 .
[23] J. Karger‐Kocsis,et al. Comparison of the fracture and failure behavior of polypropylene composites reinforced by long glass fibers and by glass mats , 1995 .
[24] E. Aifantis. On the Microstructural Origin of Certain Inelastic Models , 1984 .
[25] Ted Belytschko,et al. A general finite element procedure for problems with high gradients , 1990 .
[26] S. Saha. Speckle interferometry , 1999, astro-ph/9910506.
[27] A. Eringen. Mechanics of micromorphic materials , 1966 .
[28] T. Holden,et al. Application of Neutron Diffraction to Engineering Problems , 1988 .
[29] J. Karger‐Kocsis,et al. Assignment of acoustic emission to the failure sequence and damage zone growth in glass fiber strand mat-reinforced structural nylon RIM composites , 1992 .
[30] Mgd Marc Geers,et al. Computing strain fields from discrete displacement fields in 2D-solids , 1996 .
[31] Gilles Pijaudier-Cabot,et al. CONTINUUM DAMAGE THEORY - APPLICATION TO CONCRETE , 1989 .
[32] Issam Doghri,et al. Numerical implementation and analysis of a class of metal plasticity models coupled with ductile damage , 1995 .
[33] G. G. Peters,et al. Tools for the measurement of stress and strain fields in soft tissue : application to the elbow joint , 1987 .
[34] Wam Marcel Brekelmans,et al. Comparison of nonlocal approaches in continuum damage mechanics , 1995 .
[35] Arkady S. Voloshin,et al. Enhancement of the shadow-moiré method through digital image processing , 1993 .
[36] K. Li,et al. The interferometric strain rosette technique , 1996 .
[37] D. Borst,et al. Fundamental issues in finite element analyses of localization of deformation , 1993 .
[38] T. Belytschko,et al. A finite element with embedded localization zones , 1988 .
[39] R. Borst. SIMULATION OF STRAIN LOCALIZATION: A REAPPRAISAL OF THE COSSERAT CONTINUUM , 1991 .
[40] Y. Liu,et al. Mesh-dependence and stress singularity in finite element analysis of creep crack growth by continuum damage mechanics , 1994 .
[41] H. Schreyer,et al. On nonlocal damage models for interface problems , 1994 .
[42] Zdenek P. Bazant,et al. Why Continuum Damage is Nonlocal: Micromechanics Arguments , 1991 .
[43] C. E. Taylor,et al. An application of pattern mapping to plane motion , 1990 .
[44] Brian Schwarz,et al. Experimental modal analysis , 1999 .
[45] Rhj Ron Peerlings,et al. Gradient‐enhanced damage modelling of concrete fracture , 1998 .
[46] David L. Atherton,et al. The application of neutron diffraction to stress mapping around a blind-hole defect in stressed pipeline steel , 1994 .
[47] H. Pih,et al. Birefringent-fluid-flow method in engineering , 1980 .
[48] H Fessler. An assessment of frozen stress photoelasticity , 1992 .
[49] J-Integral Measurement Using Moire Interferometry. , 1988 .
[50] Robert J. Sanford,et al. DeterminingK and related stress-field parameters from displacement fields , 1985 .
[51] 이강용. Acoustic Emission 방법의 공학적 응용 , 1993 .
[52] J. Karger‐Kocsis,et al. Determination of the Damage Zone Size in Textile Fabric Reinforced Polypropylene Composites by Locating the Acoustic Emission , 1993, Engineering Plastics.
[53] Yasuyuki Seguchi,et al. Two-dimensional moiré method and grid method using Fourier transform , 1989 .
[54] Rhj Ron Peerlings. Gradient damage for quasi-brittle materials , 1994 .
[55] Kenneth Runesson,et al. Cohesive crack models for semi-brittle materials derived from localization of damage coupled to plasticity , 1994 .
[56] R. Borst,et al. CONTINUUM MODELS FOR DISCONTINUOUS MEDIA , 1991 .
[57] Zhen Chen,et al. A numerical solution scheme for softening problems involving total strain control , 1990 .
[58] E. Deprettere. SVD and signal processing: algorithms, applications and architectures , 1989 .
[59] P. Ifju,et al. High Sensitivity Moiré: Experimental Analysis for Mechanics and Materials , 1995 .
[60] N. Burlion,et al. Damage and localisation in elastic materials with voids , 1996 .
[61] Luciano Pirodda,et al. Shadow And Projection Moire Techniques For Absolute Or Relative Mapping Of Surface Shapes , 1982 .
[62] A Hasman,et al. Noise reduction in estimating cardiac deformation from marker tracks. , 1990, The American journal of physiology.
[63] Ted Belytschko,et al. Continuum Theory for Strain‐Softening , 1984 .
[64] C. Wykes,et al. Holographic and Speckle Interferometry: A Discussion of the Theory, Practice and Application of the Techniques , 1983 .
[65] Eann A. Patterson,et al. Towards full field automated photoelastic analysis of complex components , 1991 .
[66] L. Baker. Thermoelastic stress analysis , 1981, IEEE Journal of Quantum Electronics.
[67] R. K. Müller,et al. Complete automatic analysis of photoelastic fringes , 1979 .
[68] Vlado A. Lubarda,et al. An analysis of large-strain damage elastoplasticity , 1994 .
[69] René de Borst,et al. Gradient-dependent plasticity: formulation and algorithmic aspects , 1992 .
[70] C. J. Tay,et al. Determination of the plastic zone by laser-speckle correlation , 1991 .
[71] A. Needleman. Material rate dependence and mesh sensitivity in localization problems , 1988 .
[72] W. F. Ranson,et al. Designing with scattered-light photoelasticity , 1980 .
[73] Daniel Post. Sharpening and multiplication of moiré fringes , 1967 .
[74] Jan Cernosek,et al. Three-dimensional photoelasticity by stress freezing , 1980 .
[75] M. Crisfield. An arc‐length method including line searches and accelerations , 1983 .
[76] T. Belytschko,et al. Localization limiters in transient problems , 1988 .
[77] J. Pamin,et al. Gradient-dependent plasticity in numerical simulation of localization phenomena , 1994 .
[78] Colin Walker,et al. Heterodyne moiré interferometry for automated strain measurement , 1994 .
[79] W. Brekelmans. Nonlocal formulation of the evolution of damage in a one-dimensional configuration , 1993 .
[80] D. Borst,et al. New horizons in computer analysis of damage and fracture in quasi-brittle materials , 1994 .
[81] L. J. Sluys,et al. Wave propagation, localisation and dispersion in softening solids : proefschrift , 1992 .
[82] M. Frémond,et al. Damage, gradient of damage and principle of virtual power , 1996 .
[83] T. G. Voevodkina,et al. [Holographic interferometry]. , 1985, Laboratornoe delo.
[84] Jan-Anders E. Månson,et al. Impregnation technology for thermoplastic matrix composites , 1992 .
[85] J. M. Dulieu-Smith,et al. The determination of crack-tip parameters from thermoelastic data , 1996 .
[86] Ares J. Rosakis,et al. A coherent gradient sensor for crack tip deformation measurements: analysis and experimental results , 1991 .
[87] H. Saunders,et al. Finite element procedures in engineering analysis , 1982 .
[88] Alberto Taliercio,et al. Anisotropic damage model for the multiaxial static and fatigue behaviour of plain concrete , 1996 .
[89] L. J. Sluys,et al. On gradient-enhanced damage and plasticity models for failure in quasi-brittle and frictional materials , 1995 .
[90] A. Maji,et al. Electronic speckle pattern interferometry for fracture mechanics testing , 1991 .
[91] Zhen Chen,et al. Secant structural solution strategies under element constraint for incremental damage , 1991 .
[92] Anthony G. Evans,et al. A simple method for measuring surface strains around cracks , 1996 .
[93] Rhj Ron Peerlings,et al. Some observations on localisation in non-local and gradient damage models , 1996 .
[94] S. Yokozeki,et al. Moiré interferometry. , 1979, Applied optics.
[95] E. Landis,et al. Detection of microcracking in concrete by acoustic emission , 1991 .
[96] Z. Bažant,et al. Strain-softening bar and beam: Exact non-local solution , 1988 .
[97] Ted Belytschko,et al. The spectral overlay on finite elements for problems with high gradients , 1990 .
[98] B. Frieden,et al. Laser speckle and related phenomena , 1984, IEEE Journal of Quantum Electronics.
[99] T. Mackin,et al. The use of thermoelasticity to evaluate stress redistribution and notch sensitivity in ceramic matrix composites , 1996 .
[100] P. Benson Shing,et al. Embedded representation of fracture in concrete with mixed finite elements , 1995 .
[101] Kazushi Yamanaka,et al. IN ACOUSTIC MICROSCOPY , 1982 .
[102] L. Ek,et al. A recording and display system for hologram interferometry with low resolution imaging devices , 1975 .
[103] Gilles Pijaudier-Cabot,et al. Measurement of Characteristic Length of Nonlocal Continuum , 1989 .
[104] I. Ward,et al. A comparison of short glass fiber reinforced polypropylene plates made by conventional injection molding and using shear controlled injection molding , 1996 .
[105] R. Hill. A general theory of uniqueness and stability in elastic-plastic solids , 1958 .
[106] J. Karger‐Kocsis,et al. Fracture behaviour of glass-fibre mat-reinforced structural nylon RIM composites studied by microscopic and acoustic emission techniques , 1993 .
[107] R. Smith,et al. THE USE OF SPATE TO MEASURE RESIDUAL STRESSES AND FATIGUE CRACK GROWTH , 1989 .
[108] Rolf Mahnken,et al. A unified approach for parameter identification of inelastic material models in the frame of the finite element method , 1996 .
[109] J. Karger‐Kocsis,et al. Dynamic Mechanical Analysis of Glass Mat-Reinforced Polypropylene (GMT-PP) , 1994 .
[110] J. C. Simo,et al. Strain- and stress-based continuum damage models—I. Formulation , 1987 .
[111] P. Rastogi,et al. Measurement of the length of fracture process zone in fiber-reinforced concrete using holographic Moiré , 1994 .
[112] H.L.J. Pang. Experimental stress analysis of fatigue cracks by SPATE , 1993 .
[113] Zhen Chen,et al. One-Dimensional Softening With Localization , 1986 .
[114] Ming L. Wang,et al. Strain measurements using real time X-ray images , 1995 .
[115] Vincent J. Parks,et al. The range of speckle metrology , 1980 .
[116] J. Dally. An introduction to dynamic photoelasticity , 1980 .
[117] A. Kobayashi. PHOTOELASTIC STUDIES OF FRACTURE , 1971 .
[118] Zdeněk P. Bažant,et al. Cracking and damage: strain localization and size effect , 1989 .
[119] H. Tippur,et al. Measurement of interfacial fracture parameters using coherent gradient sensing (CGS) , 1995 .
[120] Nelson N. Hsu,et al. Approach to Acoustic Emission Signal Analysis - Theory and Experiment , 1978 .
[121] R. Pidaparti. Microdamage simulation in a bone tissue using finite element analysis , 1997 .
[122] The role of strain measurement technology in structural evaluation , 1994 .
[123] Zdenek P. Bazant,et al. Imbricate continuum and its variational derivation , 1984 .
[124] Gary Cloud,et al. Optical Methods of Engineering Analysis , 1996 .
[125] Nicolas Triantafyllidis,et al. A gradient approach to localization of deformation. I. Hyperelastic materials , 1986 .
[126] Siegfried F. Stiemer,et al. Improved arc length orthogonality methods for nonlinear finite element analysis , 1987 .
[127] S. Xia,et al. A nonlocal damage theory , 1987 .
[128] M. Ortiz,et al. A finite element method for localized failure analysis , 1987 .
[129] R. Borst,et al. Experimental monitoring of strain localization and failure behaviour of composite materials , 1996 .
[130] A. J. Durelli,et al. The moiré method—a review , 1983 .
[131] Ekkehard Ramm,et al. Strategies for Tracing the Nonlinear Response Near Limit Points , 1981 .
[132] Alex S. Redner,et al. Photoelastic coatings , 1980 .
[133] C. W. Smith,et al. Patterns of U and V Displacements Around Cracks in Aluminum by Moire Interferometry , 1984 .
[134] Milan Jirásek,et al. Nonlocal Model Based on Crack Interactions: A Localization Study , 1994 .
[135] J. Karger‐Kocsis. Fracture mechanical characterization and damage zone development in glass fiber mat-reinforced thermoplastics , 1993 .
[136] E. Aifantis. On the role of gradients in the localization of deformation and fracture , 1992 .
[137] Reinhold Ritter,et al. Speckle interferometry in material testing and dimensioning of structures , 1994, Optics & Photonics.
[138] J. Oliyer. Continuum modelling of strong discontinuities in solid mechanics using damage models , 1995 .
[139] J. Karger‐Kocsis,et al. Failure Mode and Damage Zone Development in a GMT-PP by Acoustic Emission and Thermography , 1994 .
[140] A. Chulya,et al. An improved automatic incremental algorithm for the efficient solution of nonlinear finite element equations , 1987 .
[141] T. G. Ryall,et al. Performance of the FAST system for stress analysis , 1995 .
[142] S. Takezono,et al. A nonlocal damage approach to analysis of the fracture process zone , 1994 .
[143] D. S. Mountain,et al. Stress Pattern Analysis By Thermal Emission (SPATE) , 1979, Other Conferences.
[144] Ioannis Vardoulakis,et al. A gradient flow theory of plasticity for granular materials , 1991 .
[145] S. H. Choi,et al. Determination of stress-intensity factors by the method of caustics in anisotropic materials , 1995 .
[146] P. Feenstra. Computational aspects of biaxial stress in plain and reinforced concrete : proefschrift , 1993 .
[147] R. de Borst,et al. Non-linear analysis of frictional materials , 1986 .
[148] Christof Rohrbach,et al. Handbuch für experimentelle Spannungsanalyse , 1989 .
[149] J. Devaux,et al. Bifurcation Effects in Ductile Metals With Nonlocal Damage , 1994 .
[150] Gilles Pijaudier-Cabot,et al. Progressive damage in discrete models and consequences on continuum modelling , 1996 .
[151] R. J. Sanford,et al. A general method for determining mixed-mode stress intensity factors from isochromatic fringe patterns , 1979 .
[152] Hermann Engles,et al. Numerical quadrature and cubature , 1980 .