Wire Arc Additive Manufacturing: Review on Recent Findings and Challenges in Industrial Applications and Materials Characterization

Wire arc additive manufacturing (WAAM) is a fusion manufacturing process in which the heat energy of an electric arc is employed for melting the electrodes and depositing material layers for wall formation or for simultaneously cladding two materials in order to form a composite structure. This directed energy deposition-arc (DED-arc) method is advantageous and efficient as it produces large parts with structural integrity due to the high deposition rates, reduced wastage of raw material, and low consumption of energy in comparison with the conventional joining processes and other additive manufacturing technologies. These features have resulted in a constant and continuous increase in interest in this modern manufacturing technique which demands further studies to promote new industrial applications. The high demand for WAAM in aerospace, automobile, nuclear, moulds, and dies industries demonstrates compatibility and reflects comprehensiveness. This paper presents a comprehensive review on the evolution, development, and state of the art of WAAM for non-ferrous materials. Key research observations and inferences from the literature reports regarding the WAAM applications, methods employed, process parameter control, optimization and process limitations, as well as mechanical and metallurgical behavior of materials have been analyzed and synthetically discussed in this paper. Information concerning constraints and enhancements of the wire arc additive manufacturing processes to be considered in terms of wider industrial applicability is also presented in the last part of this paper.

[1]  Alain Bernard,et al.  Weld bead modeling and process optimization in Hybrid Layered Manufacturing , 2011, Comput. Aided Des..

[2]  Bojin Qi,et al.  Microstructure and mechanical properties of wire + arc additively manufactured 2024 aluminum alloy components: As-deposited and post heat-treated , 2019, Journal of Manufacturing Processes.

[3]  Wang Yangfan,et al.  Microstructure and mechanical properties of Inconel 625 fabricated by wire-arc additive manufacturing , 2019, Surface and Coatings Technology.

[4]  Christoph Leyens,et al.  Deposition of Ti–6Al–4V using laser and wire, part I: Microstructural properties of single beads , 2011 .

[5]  J. Volpp,et al.  Fluctuation effects in Wire Arc Additive Manufacturing of aluminium analysed by high-speed imaging , 2020, Journal of Manufacturing Processes.

[6]  Chengyang Zhang,et al.  Influence of pulsed arc on the metal droplet deposited by projected transfer mode in wire-arc additive manufacturing , 2018, Journal of Materials Processing Technology.

[7]  Faiz Redza Ramli,et al.  Review of Wire Arc Additive Manufacturing for 3D Metal Printing , 2019, Int. J. Autom. Technol..

[8]  Z. Pan,et al.  Effect of interpass temperature on in-situ alloying and additive manufacturing of titanium aluminides using gas tungsten arc welding , 2015 .

[9]  Gianni Campatelli,et al.  Heat accumulation prevention in Wire-Arc-Additive-Manufacturing using air jet impingement , 2018, Manufacturing Letters.

[10]  P. Colegrove,et al.  Metal transfer modes in plasma Wire + Arc additive manufacture , 2019, Journal of Materials Processing Technology.

[11]  Y. Zhai,et al.  Micropore evolution in additively manufactured aluminum alloys under heat treatment and inter-layer rolling , 2020 .

[12]  Daniel T. Valentine,et al.  Study of mass transport in cold wire deposition for Wire Arc Additive Manufacturing , 2018, International Journal of Heat and Mass Transfer.

[13]  Seung Hwan Lee.  Optimization of Cold Metal Transfer-Based Wire Arc Additive Manufacturing Processes Using Gaussian Process Regression , 2020, Metals.

[14]  Stewart Williams,et al.  Development of Wire + Arc additive manufacture for the production of large-scale unalloyed tungsten components , 2019, International Journal of Refractory Metals and Hard Materials.

[15]  D. Fan,et al.  Arc deposition of wear resistant layer TiN on Ti6Al4V using simultaneous feeding of nitrogen and wire , 2020 .

[16]  Bintao Wu,et al.  Application of Multidirectional Robotic Wire Arc Additive Manufacturing Process for the Fabrication of Complex Metallic Parts , 2020, IEEE Transactions on Industrial Informatics.

[17]  Jean Pierre Bergmann,et al.  Wire arc additive manufacturing of hot work tool steel with CMT process , 2019, Journal of Materials Processing Technology.

[18]  I. R. Pashby,et al.  Deposition of Ti–6Al–4V using a high power diode laser and wire, Part I: Investigation on the process characteristics , 2008 .

[19]  Bojin Qi,et al.  Microstructure and mechanical properties of double-wire + arc additively manufactured Al-Cu-Mg alloys , 2018 .

[20]  Chen Zhang,et al.  Workpiece vibration augmented wire arc additive manufacturing of high strength aluminum alloy , 2019, Journal of Materials Processing Technology.

[21]  D. Fan,et al.  Droplet transfer behavior in bypass-coupled wire arc additive manufacturing , 2020 .

[22]  F. Deschaux-Beaume,et al.  Effect of process parameters on the quality of aluminium alloy Al5Si deposits in wire and arc additive manufacturing using a cold metal transfer process , 2018 .

[24]  Imre Horváth,et al.  Enhanced beads overlapping model for wire and arc additive manufacturing of multi-layer multi-bead metallic parts , 2018 .

[25]  Jinglong Li,et al.  Geometric Limitation and Tensile Properties of Wire and Arc Additive Manufacturing 5A06 Aluminum Alloy Parts , 2017, Journal of Materials Engineering and Performance.

[26]  J. Watts,et al.  The influence of build parameters and wire batch on porosity of wire and arc additive manufactured aluminium alloy 2319 , 2018, Journal of Materials Processing Technology.

[27]  Daryush K. Aidun,et al.  Thermal modeling and characterization of wire arc additive manufactured duplex stainless steel , 2019, Journal of Materials Processing Technology.

[28]  Xin Lin,et al.  Effects of deposition strategies on macro/microstructure and mechanical properties of wire and arc additive manufactured Ti 6Al 4V , 2019, Materials Science and Engineering: A.

[29]  Ming Gao,et al.  Wire arc additive manufacturing of Al-6Mg alloy using variable polarity cold metal transfer arc as power source , 2018 .

[30]  Xin Lin,et al.  Influence of travel speed on microstructure and mechanical properties of wire + arc additively manufactured 2219 aluminum alloy , 2020, Journal of Materials Science & Technology.

[31]  Qiang Wang,et al.  Correlation between arc mode, microstructure, and mechanical properties during wire arc additive manufacturing of 316L stainless steel , 2019, Materials Science and Engineering: A.

[32]  Huimin Gu,et al.  The Influence of Heat Input on the Microstructure and Properties of Wire-Arc-Additive-Manufactured Al-Cu-Sn Alloy Deposits , 2020, Metals.

[33]  Klaus Thiele,et al.  Design and Parameter Identification of Wire and Arc Additively Manufactured (WAAM) Steel Bars for Use in Construction , 2019, Metals.

[34]  Bintao Wu,et al.  Effect of Magnetic Arc Oscillation on the geometry of single-pass multi-layer walls and the process stability in wire and arc additive manufacturing , 2020 .

[35]  Sameehan S. Joshi,et al.  Effect of pulsed metal inert gas (pulsed-MIG) and cold metal transfer (CMT) techniques on hydrogen dissolution in wire arc additive manufacturing (WAAM) of aluminium , 2020, The International Journal of Advanced Manufacturing Technology.

[36]  Guangjun Zhang,et al.  Adaptive control of deposited height in GMAW-based layer additive manufacturing , 2014 .

[37]  K. Narayana,et al.  OPTIMIZATION OF MECHANICAL PROPERTIES OF WIRE ARC ADDITIVE MANUFACTURED SPECIMENS USING GREY-BASED TAGUCHI METHOD , 2020, Journal of critical reviews.

[38]  A. De,et al.  Residual stresses in wire-arc additive manufacturing – Hierarchy of influential variables , 2020 .

[39]  V. Anandakrishnan,et al.  Experimental investigations on the effect of wire arc additive manufacturing process parameters on the layer geometry of Inconel 825 , 2020 .

[40]  Jun Xiong,et al.  Finite element analysis and experimental validation of thermal behavior for thin-walled parts in GMAW-based additive manufacturing with various substrate preheating temperatures , 2017 .

[41]  Vimal Dhokia,et al.  Invited review article: Strategies and processes for high quality wire arc additive manufacturing , 2018, Additive Manufacturing.

[42]  Dongqing Yang,et al.  Forming characteristics of thin-wall steel parts by double electrode GMAW based additive manufacturing , 2016 .

[43]  M. Murua,et al.  Design and integration of WAAM technology and in situ monitoring system in a gantry machine , 2017 .

[44]  Zhe Sun,et al.  Microstructural evolution and mechanical property of Ti-6Al-4V wall deposited by continuous plasma arc additive manufacturing without post heat treatment. , 2017, Journal of the mechanical behavior of biomedical materials.

[45]  John Ahmet Erkoyuncu,et al.  Designing a WAAM based manufacturing system for defence applications , 2015 .

[46]  Helen Lockett,et al.  A modular path planning solution for Wire + Arc Additive Manufacturing , 2019, Robotics Comput. Integr. Manuf..

[47]  Jianxun Zhang,et al.  Comparative study on the microstructures and properties of wire+arc additively manufactured 5356 aluminium alloy with argon and nitrogen as the shielding gas , 2020 .

[49]  I. Horváth,et al.  GMAW-based additive manufacturing of inclined multi-layer multi-bead parts with flat-position deposition , 2018, Journal of Materials Processing Technology.

[50]  Paul A. Colegrove,et al.  Thermo-mechanical analysis of Wire and Arc Additive Layer Manufacturing process on large multi-layer parts , 2011 .

[51]  Helen Lockett,et al.  Design for Wire + Arc Additive Manufacture: design rules and build orientation selection , 2017 .

[52]  Xizhang Chen,et al.  Effect of heat input on microstructure and mechanical properties of Al-Mg alloys fabricated by WAAM , 2019, Applied Surface Science.

[53]  C. Dharmendra,et al.  Wire-arc additive manufacturing of nickel aluminum bronze/stainless steel hybrid parts – Interfacial characterization, prospects, and problems , 2020 .

[54]  A. Azar,et al.  Heat source management in wire-arc additive manufacturing process for Al-Mg and Al-Si alloys , 2019, Additive Manufacturing.

[55]  Z. Pan,et al.  Phase constituent control and correlated properties of titanium aluminide intermetallic alloys through dual-wire arc additive manufacturing , 2019, Materials Letters.

[56]  Ana María Camacho,et al.  Preliminary development of a Wire and Arc Additive Manufacturing system (WAAM) , 2017 .

[57]  Xin Lin,et al.  Optimisation of interpass temperature and heat input for wire and arc additive manufacturing 5A06 aluminium alloy , 2017 .

[58]  Hanguang Fu,et al.  Characterization of wire arc additive manufacturing 2Cr13 part: Process stability, microstructural evolution, and tensile properties , 2018 .

[59]  Gustavo Franco Barbosa,et al.  Additive Manufacturing of Metal Parts by Welding , 2015 .

[60]  F. Martina,et al.  Grain refinement in an unalloyed tantalum structure by combining Wire+Arc additive manufacturing and vertical cold rolling , 2020 .

[61]  H. Sasahara,et al.  Thermal sensing and heat input control for thin-walled structure building based on numerical simulation for wire and arc additive manufacturing , 2020 .

[62]  Paul A. Colegrove,et al.  Analytical process model for wire + arc additive manufacturing , 2018 .

[63]  B. Nyhus,et al.  Additive manufacturing using WAAM with AA5183 wire , 2018, Journal of Materials Processing Technology.

[64]  Yi Luo,et al.  Energy characteristics of droplet transfer in wire-arc additive manufacturing based on the analysis of arc signals , 2019, Measurement.

[65]  Bintao Wu,et al.  Mitigation of thermal distortion in wire arc additively manufactured Ti6Al4V part using active interpass cooling , 2019, Science and Technology of Welding and Joining.

[66]  Brandon A. Krick,et al.  Wire and arc additive manufactured steel: Tensile and wear properties , 2017 .

[67]  S. Williams,et al.  Microstructure, hardness and mechanical properties of two different unalloyed tantalum wires deposited via wire + arc additive manufacture , 2019, International Journal of Refractory Metals and Hard Materials.

[68]  Xiao Huang,et al.  Effect of wire and arc additive manufacturing (WAAM) process parameters on bead geometry and microstructure , 2019, Additive Manufacturing.

[69]  Matthew Roy,et al.  Residual stress of as-deposited and rolled wire+arc additive manufacturing Ti–6Al–4V components , 2016 .

[70]  Kehong Wang,et al.  The double-wire feed and plasma arc additive manufacturing process for deposition in Cr-Ni stainless steel , 2018, Journal of Materials Processing Technology.

[71]  Gianni Campatelli,et al.  Optimization of WAAM Deposition Patterns for T-crossing Features , 2016 .

[72]  H. Coules,et al.  Wire + Arc Additively Manufactured Inconel 718: Effect of post-deposition heat treatments on microstructure and tensile properties , 2019, Materials & Design.

[73]  Chuansong Wu,et al.  Investigating the generation process of molten droplets and arc plasma in the confined space during compulsively constricted WAAM , 2020 .

[74]  Simon Radel,et al.  CAM for On-line Control for Wire Arc Additive Manufacturing , 2018, Computer-Aided Design and Applications.

[75]  U. Reisgen,et al.  Increasing the manufacturing efficiency of WAAM by advanced cooling strategies , 2020, Welding in the World.

[76]  Huijun Li,et al.  A multi-bead overlapping model for robotic wire and arc additive manufacturing (WAAM) , 2015 .

[77]  Paolo Claudio Priarone,et al.  Multi-criteria environmental and economic impact assessment of wire arc additive manufacturing , 2020 .

[78]  Paul A. Colegrove,et al.  Residual stress and texture control in Ti-6Al-4V wire + arc additively manufactured intersections by stress relief and rolling , 2018, Materials & Design.

[79]  Kun Liu,et al.  Design and cracking susceptibility of additively manufactured Al-Cu-Mg alloys with tandem wires and pulsed arc , 2018, Journal of Materials Processing Technology.

[80]  Xin Lin,et al.  Microstructure and mechanical properties of wire and arc additive manufactured AZ31 magnesium alloy using cold metal transfer process , 2020 .

[81]  A. Kaplan,et al.  Laser enhancement of wire arc additive manufacturing , 2019, Journal of Laser Applications.

[82]  Jinglong Li,et al.  Optimization of wire feed for GTAW based additive manufacturing , 2017 .

[83]  S. Chandrasekaran,et al.  Wire arc additive manufacturing of functionally graded material for marine risers , 2020, Materials Science and Engineering: A.

[84]  Hiroyuki Sasahara,et al.  Layer geometry control for the fabrication of lattice structures by wire and arc additive manufacturing , 2019, Additive Manufacturing.

[85]  Yanhu Wang,et al.  In-situ wire-feed additive manufacturing of Cu-Al alloy by addition of silicon , 2019, Applied Surface Science.

[86]  Hui Chen,et al.  Fabrication of inclined thin-walled parts in multi-layer single-pass GMAW-based additive manufacturing with flat position deposition , 2017 .

[87]  Stewart Williams,et al.  Enhancing mechanical properties of wire + arc additively manufactured INCONEL 718 superalloy through in-process thermomechanical processing , 2018, Materials & Design.

[88]  F. Martina,et al.  Wire plus arc additive manufactured functional steel surfaces enhanced by rolling , 2020 .

[89]  Huimin Gu,et al.  Effect of Heat Input on Formability, Microstructure, and Properties of Al–7Si–0.6Mg Alloys Deposited by CMT-WAAM Process , 2019 .