DEVELOPMENT OF A FINITE ELEMENT MODEL OF THE NECK

Head neck responses from volunteer experiments, as obtained in various loading directions by the Naval Biodynamics Laboratory (NBDL), represent a unique set of data in the biomechanical research field. From this a set of volunteer thoracic (TI) and head responses were selected as a reference for this study. The objective of the study is to develop a finite element model (FEM) of the human neck in frontal and lateral directions. The number of elements in the model were kept low in order to reduce the processing time for simulation and to minimize damping problems. The structure of the model is as follows: the vertebrae and the head were considered as rigid bodies. The interface between vertebrae such as discs and different ligaments are modelled by brick and spring elements. The passive action of the muscles are taken into account when determining the stiffness characteristics of the ligaments. Satisfactory results were obtained in terms of kinematic responses of the head (comparison with NBDL data) in frontal and lateral directions. Further investigations are needed for modelling the muscles to allow for injury prediction. The paper describes the characteristics of this model, the rationale behind the definition of model elements, and the performance compared with the volunteer reference. For the covering abstract of the conference see IRRD 879189.

[1]  A. Sances,et al.  Tensile Strength of Spinal Ligaments , 1988, Spine.

[2]  H. J. Woltring,et al.  Omni-Directional Human Head-Neck Response , 1986 .

[3]  A. Sances,et al.  Dynamic Response of Human Cervical Spine Ligaments , 1989, Spine.

[4]  E. B. Becker Preliminary Discussion of an Approach to Modeling Living Human Head and Neck to −Gx Impact Acceleration , 1973 .

[5]  William H. Muzzy,et al.  Comparison of Human and Hybrid III Head and Neck Dynamic Response , 1986 .

[6]  Lars G. Gilbertson,et al.  Ligamentous laxity across C0-C1-C2 complex. Axial torque-rotation characteristics until failure. , 1990 .

[7]  J. M. Porter,et al.  Enquête anthropométrique sur les conducteurs français (Anthropometric survey of French drivers): Roger Rebiffé, Jacques Guillien and Patrick Pasquet Laboratoire de physiologie et de biomecanique de L'association Peugeot-Renault , 1985 .

[8]  T Belytschko,et al.  Theory and application of a three-dimensional model of the human spine. , 1978, Aviation, space, and environmental medicine.

[9]  W Goldsmith,et al.  Response of a human head/neck/upper-torso replica to dynamic loading--II. Analytical/numerical model. , 1987, Journal of biomechanics.

[10]  T Merrill,et al.  Three-dimensional response of a lumped parameter head-neck model due to impact and impulsive loading. , 1984, Journal of biomechanics.

[11]  Lawrence W. Schneider,et al.  Simulation analysis of head and neck dynamic response , 1984 .

[12]  G. C. Willems,et al.  The Effect of Duration, Rate of Onset, and Peak Sled Acceleration on the Dynamic Response of the Human Head and Neck , 1976 .

[13]  Nathalie Maurel Modelisation geometrique et mecanique tridimensionnelle par elements finis du rachis cervical inferieur , 1993 .

[14]  D. H. Robbins,et al.  Development of anthropometrically based design specifications for an advanced adult anthropomorphic dummy family, volume 1 , 1983 .

[15]  R L Huston,et al.  Numerical advances in gross-motion simulations of head/neck dynamics. , 1987, Journal of biomechanical engineering.

[16]  J G Reber,et al.  Analysis of large head-neck motions. , 1979, Journal of biomechanics.

[17]  M. Panjabi,et al.  Three-Dimensional Movements of the Upper Cervical Spine , 1988, Spine.