Additive manufacturing of tissues and organs

[1]  Dietmar W Hutmacher,et al.  Direct Writing By Way of Melt Electrospinning , 2011, Advanced materials.

[2]  Harri Korhonen,et al.  Preparation of poly(ε-caprolactone)-based tissue engineering scaffolds by stereolithography. , 2011, Acta biomaterialia.

[3]  Dietmar W Hutmacher,et al.  The three-dimensional vascularization of growth factor-releasing hybrid scaffold of poly (epsilon-caprolactone)/collagen fibers and hyaluronic acid hydrogel. , 2011, Biomaterials.

[4]  Vladimir Mironov,et al.  Organ printing: from bioprinter to organ biofabrication line. , 2011, Current opinion in biotechnology.

[5]  Dietmar Werner Hutmacher,et al.  CAD/CAM-assisted breast reconstruction , 2011, Biofabrication.

[6]  Jeroen Rouwkema,et al.  In vitro platforms for tissue engineering: implications for basic research and clinical translation , 2011, Journal of tissue engineering and regenerative medicine.

[7]  Jos Malda,et al.  A Printable Photopolymerizable Thermosensitive p(HPMAm‐lactate)‐PEG Hydrogel for Tissue Engineering , 2011 .

[8]  J Malda,et al.  Bioprinting of hybrid tissue constructs with tailorable mechanical properties , 2011, Biofabrication.

[9]  Katja Schenke-Layland,et al.  In vitro human tissue models--moving towards personalized regenerative medicine. , 2011, Advanced drug delivery reviews.

[10]  P. R. van Weeren,et al.  Hyaluronic acid and dextran-based semi-IPN hydrogels as biomaterials for bioprinting. , 2011, Biomacromolecules.

[11]  Giovanni Vozzi,et al.  PAM2 (piston assisted microsyringe): a new rapid prototyping technique for biofabrication of cell incorporated scaffolds. , 2011, Tissue engineering. Part C, Methods.

[12]  A. Kirschning,et al.  Preparation and Evaluation of Hydrogel-Composites from Methacrylated Hyaluronic Acid, Alginate, and Gelatin for Tissue Engineering , 2011, The International journal of artificial organs.

[13]  Clemens A van Blitterswijk,et al.  Effects of the architecture of tissue engineering scaffolds on cell seeding and culturing. , 2010, Acta biomaterialia.

[14]  Dietmar W Hutmacher,et al.  Advanced Tissue Sciences Inc.: learning from the past, a case study for regenerative medicine. , 2010, Regenerative medicine.

[15]  Hod Lipson,et al.  Additive manufacturing for in situ repair of osteochondral defects , 2010, Biofabrication.

[16]  Katia Bertoldi,et al.  Mathematically defined tissue engineering scaffold architectures prepared by stereolithography. , 2010, Biomaterials.

[17]  Glenn D Prestwich,et al.  Bioprinting vessel-like constructs using hyaluronan hydrogels crosslinked with tetrahedral polyethylene glycol tetracrylates. , 2010, Biomaterials.

[18]  Ralf Pörtner,et al.  Expansion of Human Mesenchymal Stem Cells in a Fixed-Bed Bioreactor System Based on Non-Porous Glass Carrier – Part A: Inoculation, Cultivation, and Cell Harvest Procedures , 2010, The International journal of artificial organs.

[19]  F. Melchels,et al.  A review on stereolithography and its applications in biomedical engineering. , 2010, Biomaterials.

[20]  Bartley P Griffith,et al.  Reconstructing the Lung , 2010, Science.

[21]  R. Bashir,et al.  As Featured In: Title: Three-dimensional Photopatterning of Hydrogels Using Stereolithography for Long-term Cell Encapsulation Three-dimensional Photopatterning of Hydrogels Using Stereolithography for Long-term Cell Encapsulation † , 2022 .

[22]  A. Khademhosseini,et al.  Cell-laden microengineered gelatin methacrylate hydrogels. , 2010, Biomaterials.

[23]  F. Guillemot,et al.  High-throughput laser printing of cells and biomaterials for tissue engineering. , 2010, Acta biomaterialia.

[24]  A. Khademhosseini,et al.  Micro‐Masonry: Construction of 3D Structures by Microscale Self‐Assembly , 2010, Advanced materials.

[25]  Chris Mason,et al.  Regenerative medicine cell therapies: numbers of units manufactured and patients treated between 1988 and 2010. , 2010, Regenerative medicine.

[26]  G. Prestwich,et al.  Photocrosslinkable hyaluronan-gelatin hydrogels for two-step bioprinting. , 2010, Tissue engineering. Part A.

[27]  Adrian Wilson,et al.  TruFit CB® bone plug: chondral repair, scaffold design, surgical technique and early experiences , 2010, Expert review of medical devices.

[28]  T. Sakai,et al.  Synthesis and Mechanical Properties of a Nanocomposite Gel Consisting of a Tetra-PEG/Clay Network , 2010 .

[29]  Federica Chiellini,et al.  Polymeric Materials for Bone and Cartilage Repair , 2010 .

[30]  D W Hutmacher,et al.  [Calvarial reconstruction by customized bioactive implant]. , 2010, Handchirurgie, Mikrochirurgie, plastische Chirurgie : Organ der Deutschsprachigen Arbeitsgemeinschaft fur Handchirurgie : Organ der Deutschsprachigen Arbeitsgemeinschaft fur Mikrochirurgie der Peripheren Nerven und Gefasse : Organ der V....

[31]  Ryan Wicker,et al.  Stereolithography of spatially controlled multi-material bioactive poly(ethylene glycol) scaffolds. , 2010, Acta biomaterialia.

[32]  Fabien Guillemot,et al.  In vivo bioprinting for computer- and robotic-assisted medical intervention: preliminary study in mice , 2010, Biofabrication.

[33]  J. E. Mark,et al.  Some hydrogels having novel molecular structures , 2010 .

[34]  Rena N. D'Souza,et al.  Self-assembling multidomain peptide hydrogels: designed susceptibility to enzymatic cleavage allows enhanced cell migration and spreading. , 2010, Journal of the American Chemical Society.

[35]  Dietmar W Hutmacher,et al.  Biomaterials offer cancer research the third dimension. , 2010, Nature materials.

[36]  T. Okano,et al.  Cell sheet engineering: a unique nanotechnology for scaffold‐free tissue reconstruction with clinical applications in regenerative medicine , 2010, Journal of internal medicine.

[37]  A Tirella,et al.  A phase diagram for microfabrication of geometrically controlled hydrogel scaffolds , 2009, Biofabrication.

[38]  Matthias P. Lutolf,et al.  Designing materials to direct stem-cell fate , 2009, Nature.

[39]  Wei Sun,et al.  Bioprinting endothelial cells with alginate for 3D tissue constructs. , 2009, Journal of biomechanical engineering.

[40]  L. Niklason,et al.  Scaffold-free vascular tissue engineering using bioprinting. , 2009, Biomaterials.

[41]  Jeroen Rouwkema,et al.  Tissue assembly and organization: developmental mechanisms in microfabricated tissues. , 2009, Biomaterials.

[42]  Hiroyuki Fujiki,et al.  Artificial cartilage made from a novel double-network hydrogel: In vivo effects on the normal cartilage and ex vivo evaluation of the friction property. , 2009, Journal of biomedical materials research. Part A.

[43]  Jos Malda,et al.  Strategies for zonal cartilage repair using hydrogels. , 2009, Macromolecular bioscience.

[44]  Ivan Martin,et al.  Bioreactor-based roadmap for the translation of tissue engineering strategies into clinical products. , 2009, Trends in biotechnology.

[45]  Jan Feijen,et al.  A poly(D,L-lactide) resin for the preparation of tissue engineering scaffolds by stereolithography. , 2009, Biomaterials.

[46]  C. V. van Blitterswijk,et al.  Rapid prototyping of anatomically shaped, tissue‐engineered implants for restoring congruent articulating surfaces in small joints , 2009, Cell proliferation.

[47]  Lawrence J Bonassar,et al.  Image-guided tissue engineering , 2009, Journal of cellular and molecular medicine.

[48]  C. V. van Blitterswijk,et al.  Evaluation of photocrosslinked Lutrol hydrogel for tissue printing applications. , 2009, Biomacromolecules.

[49]  Yongnian Yan,et al.  Gradient Hydrogel Construct Based on an Improved Cell Assembling System , 2009 .

[50]  Yongnian Yan,et al.  Direct Fabrication of a Hybrid Cell/Hydrogel Construct by a Double-nozzle Assembling Technology: , 2009 .

[51]  Robert L Sah,et al.  Tissue engineering of articular cartilage with biomimetic zones. , 2009, Tissue engineering. Part B, Reviews.

[52]  Kristi S. Anseth,et al.  Photodegradable Hydrogels for Dynamic Tuning of Physical and Chemical Properties , 2009, Science.

[53]  D. Hutmacher,et al.  The return of a forgotten polymer : Polycaprolactone in the 21st century , 2009 .

[54]  Vladimir Mironov,et al.  Organ printing: tissue spheroids as building blocks. , 2009, Biomaterials.

[55]  Georg N Duda,et al.  The challenge of establishing preclinical models for segmental bone defect research. , 2009, Biomaterials.

[56]  Hod Lipson,et al.  Design and analysis of digital materials for physical 3D voxel printing , 2009 .

[57]  Scott J Hollister,et al.  Scaffold engineering: a bridge to where? , 2009, Biofabrication.

[58]  P. Calvert.  Hydrogels for Soft Machines , 2009 .

[59]  R. Service.  Coming Soon to a Knee Near You: Cartilage Like Your Very Own , 2008, Science.

[60]  Brian Derby,et al.  Bioprinting: Inkjet printing proteins and hybrid cell-containing materials and structures , 2008 .

[61]  Marcin Maruszewski,et al.  Cell-based therapeutics from an economic perspective: primed for a commercial success or a research sinkhole? , 2008, Regenerative medicine.

[62]  Masayuki Yamato,et al.  Endothelial Cell Coculture Within Tissue-Engineered Cardiomyocyte Sheets Enhances Neovascularization and Improves Cardiac Function of Ischemic Hearts , 2008, Circulation.

[63]  Jeroen Rouwkema,et al.  Vascularization in tissue engineering. , 2008, Trends in biotechnology.

[64]  David J. Williams,et al.  Cell therapies: realizing the potential of this new dimension to medical therapeutics , 2008, Journal of tissue engineering and regenerative medicine.

[65]  G. Finkenzeller,et al.  In vivo engineering of a human vasculature for bone tissue engineering applications , 2008, Journal of cellular and molecular medicine.

[66]  David L. Kaplan,et al.  Direct‐Write Assembly of Microperiodic Silk Fibroin Scaffolds for Tissue Engineering Applications , 2008 .

[67]  Han Zhang,et al.  Microassembly Fabrication of Tissue Engineering Scaffolds With Customized Design , 2008, IEEE Transactions on Automation Science and Engineering.

[68]  S. Bryant,et al.  Cell encapsulation in biodegradable hydrogels for tissue engineering applications. , 2008, Tissue engineering. Part B, Reviews.

[69]  Jae Nam,et al.  Direct cell writing of 3D microorgan for in vitro pharmacokinetic model. , 2008, Tissue engineering. Part C, Methods.

[70]  Tao Xu,et al.  High-Throughput Production of Single-Cell Microparticles Using an Inkjet Printing Technology , 2008 .

[71]  A. Mata,et al.  Self-Assembly of Large and Small Molecules into Hierarchically Ordered Sacs and Membranes , 2008, Science.

[72]  N. Kotov,et al.  Three-dimensional cell culture matrices: state of the art. , 2008, Tissue engineering. Part B, Reviews.

[73]  Ana Jaklenec,et al.  Great expectations: private sector activity in tissue engineering, regenerative medicine, and stem cell therapeutics. , 2008, Tissue engineering. Part A.

[74]  W. Dhert,et al.  Three-dimensional fiber deposition of cell-laden, viable, patterned constructs for bone tissue printing. , 2008, Tissue engineering. Part A.

[75]  Kristi S Anseth,et al.  Macromolecular Monomers for the Synthesis of Hydrogel Niches and Their Application in Cell Encapsulation and Tissue Engineering. , 2008, Progress in polymer science.

[76]  Minna Kellomäki,et al.  A review of rapid prototyping techniques for tissue engineering purposes , 2008, Annals of medicine.

[77]  Aleksandr Ovsianikov,et al.  Two‐photon polymerization technique for microfabrication of CAD‐designed 3D scaffolds from commercially available photosensitive materials , 2007, Journal of tissue engineering and regenerative medicine.

[78]  Guoping Chen,et al.  Cellular control of tissue architectures using a three-dimensional tissue fabrication technique. , 2007, Biomaterials.

[79]  W. Hennink,et al.  Hydrogels as extracellular matrices for skeletal tissue engineering: state-of-the-art and novel application in organ printing. , 2007, Tissue engineering.

[80]  Hod Lipson,et al.  Fab@Home: the personal desktop fabricator kit , 2007 .

[81]  C. Laurencin,et al.  Biodegradable polymers as biomaterials , 2007 .

[82]  Phil G Campbell,et al.  Tissue engineering with the aid of inkjet printers , 2007, Expert opinion on biological therapy.

[83]  F. Lin,et al.  Rapid Prototyping Three-Dimensional Cell/Gelatin/Fibrinogen Constructs for Medical Regeneration: , 2007 .

[84]  Sarit B. Bhaduri,et al.  Drop-on-demand printing of cells and materials for designer tissue constructs , 2007 .

[85]  S. Bhatia,et al.  Fabrication of 3D hepatic tissues by additive photopatterning of cellular hydrogels , 2007, FASEB journal : official publication of the Federation of American Societies for Experimental Biology.

[86]  E. Jabbari,et al.  Material properties and cytocompatibility of injectable MMP degradable poly(lactide ethylene oxide fumarate) hydrogel as a carrier for marrow stromal cells. , 2007, Biomacromolecules.

[87]  Wayne A Morrison,et al.  An arteriovenous loop in a protected space generates a permanent, highly vascular, tissue‐engineered construct , 2007, FASEB journal : official publication of the Federation of American Societies for Experimental Biology.

[88]  Ali Khademhosseini,et al.  Micromolding of shape-controlled, harvestable cell-laden hydrogels. , 2006, Biomaterials.

[89]  Jennifer L. West,et al.  Three‐Dimensional Biochemical and Biomechanical Patterning of Hydrogels for Guiding Cell Behavior , 2006 .

[90]  Ralph Müller,et al.  Recombinant protein-co-PEG networks as cell-adhesive and proteolytically degradable hydrogel matrixes. Part II: biofunctional characteristics. , 2006, Biomacromolecules.

[91]  G. Spagnuolo,et al.  Downloaded from jdr.sagepub.com at PENNSYLVANIA STATE UNIV on February 21, 2013 For personal use only. No other uses without permission. International and American Associations for Dental ResearchCRITICAL REVIEWS IN ORAL BIOLOGY & MEDICINE Genetic and Cel , 2006 .

[92]  Toru Takehisa,et al.  Control of cell cultivation and cell sheet detachment on the surface of polymer/clay nanocomposite hydrogels. , 2006, Biomacromolecules.

[93]  Dietmar W Hutmacher,et al.  Co-culture of bone marrow fibroblasts and endothelial cells on modified polycaprolactone substrates for enhanced potentials in bone tissue engineering. , 2006, Tissue engineering.

[94]  Milica Radisic,et al.  A photolithographic method to create cellular micropatterns. , 2006, Biomaterials.

[95]  Ryan B. Wicker,et al.  Stereolithography of Three-Dimensional Bioactive Poly(Ethylene Glycol) Constructs with Encapsulated Cells , 2006, Annals of Biomedical Engineering.

[96]  Jos Malda,et al.  Microcarriers in the engineering of cartilage and bone. , 2006, Trends in biotechnology.

[97]  Hod Lipson,et al.  Direct Freeform Fabrication of Seeded Hydrogels in Arbitrary Geometries , 2022 .

[98]  Krishnendu Roy,et al.  A digital micro-mirror device-based system for the microfabrication of complex, spatially patterned tissue engineering scaffolds. , 2006, Journal of biomedical materials research. Part A.

[99]  M. C. Rowland,et al.  Photolithographic patterning of polyethylene glycol hydrogels. , 2006, Biomaterials.

[100]  Alison P McGuigan,et al.  Vascularized Organoid Engineered by Modular Assembly Enables Blood Perfusion , 2006, Proceedings of the National Academy of Sciences of the United States of America.

[101]  Gernot Brockmann,et al.  Optimization of 3-Dimensional Imaging of the Breast Region With 3-Dimensional Laser Scanners , 2006, Annals of plastic surgery.

[102]  F. Lin,et al.  Generation of three-dimensional hepatocyte/gelatin structures with rapid prototyping system. , 2006, Tissue engineering.

[103]  Huan Li,et al.  Mechanical Properties and Structure of Polymer−Clay Nanocomposite Gels with High Clay Content , 2006 .

[104]  Geraldine Mitchell,et al.  The influence of architecture on degradation and tissue ingrowth into three-dimensional poly(lactic-co-glycolic acid) scaffolds in vitro and in vivo. , 2006, Biomaterials.

[105]  Richard Archer,et al.  Why tissue engineering needs process engineering , 2005, Nature Biotechnology.

[106]  Krishnendu Roy,et al.  Laser-layered microfabrication of spatially patterned functionalized tissue-engineering scaffolds. , 2005, Journal of biomedical materials research. Part B, Applied biomaterials.

[107]  Colleen L Flanagan,et al.  Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering. , 2005, Biomaterials.

[108]  H. Seitz,et al.  Three-dimensional printing of porous ceramic scaffolds for bone tissue engineering. , 2005, Journal of biomedical materials research. Part B, Applied biomaterials.

[109]  S. Hollister.  Porous scaffold design for tissue engineering , 2005, Nature materials.

[110]  Etienne Burdet,et al.  Microrobotics and MEMS-based fabrication techniques for scaffold-based tissue engineering. , 2005, Macromolecular bioscience.

[111]  D. Kohane,et al.  Engineering vascularized skeletal muscle tissue , 2005, Nature Biotechnology.

[112]  Aldo R Boccaccini,et al.  Bioactive composite materials for tissue engineering scaffolds , 2005, Expert review of medical devices.

[113]  Yongnian Yan,et al.  Direct Construction of a Three-dimensional Structure with Cells and Hydrogel , 2005 .

[114]  Roland Hetzer,et al.  TISSUE ENGINEERING OF VASCULAR CONDIUTS: FABRICATION OF CUSTOM-MADE SCAFFOLD USING RAPID PROTOTYPING TECHNIQUE , 2005 .

[115]  K. Shakesheff,et al.  Three‐Dimensional Bioactive and Biodegradable Scaffolds Fabricated by Surface‐Selective Laser Sintering , 2005, Advanced materials.

[116]  Wei Sun,et al.  Multi‐nozzle deposition for construction of 3D biopolymer tissue scaffolds , 2005 .

[117]  Thomas Boland,et al.  Rapid prototyping of tissue-engineering constructs, using photopolymerizable hydrogels and stereolithography. , 2004, Tissue engineering.

[118]  Stuart K Williams,et al.  Three-dimensional bioassembly tool for generating viable tissue-engineered constructs. , 2004, Tissue engineering.

[119]  Hollis G Potter,et al.  Magnetic resonance imaging after total hip arthroplasty: evaluation of periprosthetic soft tissue. , 2004, The Journal of bone and joint surgery. American volume.

[120]  T. Boland,et al.  Inkjet printing for high-throughput cell patterning. , 2004, Biomaterials.

[121]  Ali Khademhosseini,et al.  Layer-by-layer deposition of hyaluronic acid and poly-L-lysine for patterned cell co-cultures. , 2004, Biomaterials.

[122]  E. Ritman.  Micro-computed tomography-current status and developments. , 2004, Annual review of biomedical engineering.

[123]  D. Mooney,et al.  Controlling rigidity and degradation of alginate hydrogels via molecular weight distribution. , 2004, Biomacromolecules.

[124]  Michael J Lysaght,et al.  Tissue engineering: the end of the beginning. , 2004, Tissue engineering.

[125]  J A Barron,et al.  Biological Laser Printing: A Novel Technique for Creating Heterogeneous 3-dimensional Cell Patterns , 2004, Biomedical microdevices.

[126]  Jeffrey A. Hubbell,et al.  Cell-Demanded Liberation of VEGF121 From Fibrin Implants Induces Local and Controlled Blood Vessel Growth , 2004, Circulation research.

[127]  J. Lewis,et al.  Microperiodic structures: Direct writing of three-dimensional webs , 2004, Nature.

[128]  J. Xi,et al.  Modeling and processing of functionally graded materials for rapid prototyping , 2004 .

[129]  Martin Ehrbar,et al.  Cell‐demanded release of VEGF from synthetic, biointeractive cell‐ingrowth matrices for vascularized tissue growth , 2003, FASEB journal : official publication of the Federation of American Societies for Experimental Biology.

[130]  Dietmar W Hutmacher,et al.  Invention and business performance in the tissue-engineering industry. , 2003, Tissue engineering.

[131]  K Masuda,et al.  Tissue engineering of stratified articular cartilage from chondrocyte subpopulations. , 2003, Osteoarthritis and cartilage.

[132]  T. Kurokawa,et al.  Double‐Network Hydrogels with Extremely High Mechanical Strength , 2003 .

[133]  T. Boland,et al.  Cell and organ printing 2: fusion of cell aggregates in three-dimensional gels. , 2003, The anatomical record. Part A, Discoveries in molecular, cellular, and evolutionary biology.

[134]  W Cris Wilson,et al.  Cell and organ printing 1: protein and cell printers. , 2003, The anatomical record. Part A, Discoveries in molecular, cellular, and evolutionary biology.

[135]  A. Metters,et al.  Synthetic matrix metalloproteinase-sensitive hydrogels for the conduction of tissue regeneration: Engineering cell-invasion characteristics , 2003, Proceedings of the National Academy of Sciences of the United States of America.

[136]  Malcolm N. Cooke,et al.  Use of stereolithography to manufacture critical-sized 3D biodegradable scaffolds for bone ingrowth. , 2003, Journal of biomedical materials research. Part B, Applied biomaterials.

[137]  E. Hoffman,et al.  Performance evaluation of A-SPECT: a high resolution desktop pinhole SPECT system for imaging small animals , 2002 .

[138]  Manabu Mizutani,et al.  Liquid acrylate-endcapped biodegradable poly(epsilon-caprolactone-co-trimethylene carbonate). II. Computer-aided stereolithographic microarchitectural surface photoconstructs. , 2002, Journal of biomedical materials research.

[139]  Aaron Bouchie,et al.  Tissue engineering firms go under , 2002, Nature Biotechnology.

[140]  C. Contag,et al.  Advancing animal models of neoplasia through in vivo bioluminescence imaging. , 2002, European journal of cancer.

[141]  Jason A Burdick,et al.  Photoencapsulation of osteoblasts in injectable RGD-modified PEG hydrogels for bone tissue engineering. , 2002, Biomaterials.

[142]  Carlos Alberto Brebbia,et al.  Design and Nature : Comparing Design in Nature with Science and Engineering , 2002 .

[143]  D. Hutmacher,et al.  Scaffold development using 3D printing with a starch-based polymer , 2002 .

[144]  S. T. Tan,et al.  Representation and CAD modeling of heterogeneous objects , 2002 .

[145]  Scott J Hollister,et al.  Mechanical and in vivo performance of hydroxyapatite implants with controlled architectures. , 2002, Biomaterials.

[146]  I. Zein,et al.  Fused deposition modeling of novel scaffold architectures for tissue engineering applications. , 2002, Biomaterials.

[147]  L. Griffith,et al.  Tissue Engineering--Current Challenges and Expanding Opportunities , 2002, Science.

[148]  D. Mooney,et al.  Polymeric system for dual growth factor delivery , 2001, Nature Biotechnology.

[149]  I Zein,et al.  Mechanical properties and cell cultural response of polycaprolactone scaffolds designed and fabricated via fused deposition modeling. , 2001, Journal of biomedical materials research.

[150]  T. Okano,et al.  Rapid cell sheet detachment from poly(N-isopropylacrylamide)-grafted porous cell culture membranes. , 2000, Journal of biomedical materials research.

[151]  Andreas Hein,et al.  Application of stereolithography for scaffold fabrication for tissue engineered heart valves. , 2000 .

[152]  D. Odde,et al.  Laser-guided direct writing for applications in biotechnology. , 1999, Trends in biotechnology.

[153]  M. Cima,et al.  Modeling and designing functionally graded material components for fabrication with local composition control , 1999 .

[154]  J. Hubbell,et al.  A sensitivity study of the key parameters in the interfacial photopolymerization of poly(ethylene glycol) diacrylate upon porcine islets. , 1998, Biotechnology and bioengineering.

[155]  J H Keyak,et al.  Automated three-dimensional finite element modelling of bone: a new method. , 1990, Journal of biomedical engineering.

[156]  R. Tompkins,et al.  Hepatocyte function and extracellular matrix geometry: long‐term culture in a sandwich configuration , 1989, FASEB journal : official publication of the Federation of American Societies for Experimental Biology.

[157]  P. Benya,et al.  Dedifferentiated chondrocytes reexpress the differentiated collagen phenotype when cultured in agarose gels , 1982, Cell.

[158]  Ibrahim T. Ozbolat,et al.  Engineered tissue scaffolds with variational porous architecture. , 2011, Journal of biomechanical engineering.

[159]  Boris N. Chichkov,et al.  Photonic and Biomedical Applications of the Two-Photon Polymerization Technique , 2011 .

[160]  Robert Langer,et al.  High throughput methods applied in biomaterial development and discovery. , 2010, Biomaterials.

[161]  Mikaël M. Martino,et al.  Biomimetic materials in tissue engineering , 2010 .

[162]  F. Melchels,et al.  Poly(D,L-lactide)/hydroxyapatite composite tissue engineering scaffolds prepared by stereolithography , 2009 .

[163]  M. Alini,et al.  Cells and biomaterials in cartilage tissue engineering. , 2009, Regenerative medicine.

[164]  Serena M. Best,et al.  Bioceramics: Past, present and for the future , 2008 .

[165]  J. West,et al.  Rapid Prototyping of Hydrogels to Guide Tissue Formation , 2008 .

[166]  B. Derby,et al.  Delivery of human fibroblast cells by piezoelectric drop-on-demand inkjet printing. , 2008, Biomaterials.

[167]  Vladimir Mironov,et al.  Organ printing: promises and challenges. , 2008, Regenerative medicine.

[168]  S. Bhatia,et al.  Assessment of hepatocellular function within PEG hydrogels. , 2007, Biomaterials.

[169]  Makoto Nakamura,et al.  Fabrication of 3D Cell Supporting Structures With Multi-Materials Using the Bio-Printer , 2007 .

[170]  C. V. van Blitterswijk,et al.  The effect of PEGT/PBT scaffold architecture on the composition of tissue engineered cartilage. , 2005, Biomaterials.

[171]  T. Boland,et al.  Inkjet printing of viable mammalian cells. , 2005, Biomaterials.

[172]  S. Bryant,et al.  Hydrogel properties influence ECM production by chondrocytes photoencapsulated in poly(ethylene glycol) hydrogels. , 2002, Journal of biomedical materials research.

[173]  G. Whitesides,et al.  Soft Lithography. , 1998, Angewandte Chemie.

[174]  M. Cima,et al.  Mechanical properties of dense polylactic acid structures fabricated by three dimensional printing. , 1996, Journal of biomaterials science. Polymer edition.

[175]  Jeffrey A. Hubbell,et al.  Bioerodible hydrogels based on photopolymerized poly(ethylene glycol)-co-poly(.alpha.-hydroxy acid) diacrylate macromers , 1993 .

[176]  J. Vacanti,et al.  Tissue engineering : Frontiers in biotechnology , 1993 .