Transient analysis of an FHR coupled to a helium Brayton power cycle

The Fluoride salt-cooled High-temperature Reactor (FHR) features a passive decay heat removal system and a high-efficiency Brayton cycle for electricity generation. It typically employs an intermediate loop, consisting of an intermediate heat exchanger (IHX) and a secondary heat exchanger (SHX), to couple the primary system with the power conversion unit (PCU). In this study, a preliminary dynamic system model is developed to simulate transient characteristics of a prototypic 20-MWth Fluoride salt-cooled High-temperature Test Reactor (FHTR). The model consists of a series of differential conservation equations that are numerically solved using the MATLAB platform. For the reactor, a point neutron kinetics model is adopted. For the IHX and SHX, a fluted tube heat exchanger and an offset strip-fin heat exchanger are selected, respectively. Detailed geometric parameters of each component in the FHTR are determined based on the FHTR nominal steady-state operating conditions. Three initiating events are simulated in this study, including a positive reactivity insertion, a step increase in the mass flow rate of the PCU helium flow, and a step increase in the PCU helium inlet temperature to the SHX. The simulation results show that the reactor has inherent safety features for those three simulated scenarios. It is observed thatmore » the increase in the temperatures of the fuel pebbles and primary coolant is mitigated by the decrease in the reactor power due to negative temperature feedbacks. The results also indicate that the intermediate loop with the two heat exchangers plays a significant role in the transient progression of the integral reactor system.« less

[1]  D. F. Wilson,et al.  A modular design of a direct reactor auxiliary cooling system for AHTRs , 2011 .

[2]  S. Garimella,et al.  Heat Transfer and Pressure Drop Characteristics of Spirally Fluted Annuli: Part II—Heat Transfer , 1995 .

[3]  Piyush Sabharwall,et al.  Process Heat Exchanger Options for Fluoride Salt High Temperature Reactor , 2011 .

[4]  Rafiqul Gani,et al.  Design and analysis of chemical processes through DYNSIM , 1992 .

[5]  Charles W. Forsberg,et al.  The advanced high-temperature reactor: High-temperature fuel, liquid salt coolant, liquid-metal-reactor plant , 2005 .

[6]  S. Garimella,et al.  Experimental investigation of heat transfer and pressure drop characteristics of annuli with spirally-fluted inner tubes / , 1990 .

[7]  Eugenio Urquiza,et al.  Transient Thermal, Hydraulic, and Mechanical Analysis of a Counter Flow Offset Strip Fin Intermediate Heat Exchanger using an Effective Porous Media Approach , 2009 .

[8]  R. M. Manglik,et al.  Heat transfer and pressure drop correlations for the rectangular offset strip fin compact heat exchanger , 1995 .

[9]  Cristhian Galvez.  Design and Transient Analysis of Passive Safety Cooling Systems for Advanced Nuclear Reactors , 2011 .

[10]  Piyush Sabharwall,et al.  DRACS thermal performance evaluation for FHR , 2015 .

[11]  J. Kloosterman,et al.  Static design of a liquid-salt-cooled pebble bed reactor (LSPBR) , 2007 .

[12]  H. Johnstone,et al.  Heat and mass transfer in packed beds , 1955 .

[13]  Clayton Ray De Losier,et al.  The Parametric Study of an Innovative Offset Strip-Fin Heat Exchanger , 2007 .

[14]  S. Garimella,et al.  Heat Transfer and Pressure Drop Characteristics of Spirally Fluted Annuli: Part I—Hydrodynamics , 1995 .

[15]  J. Duderstadt,et al.  Nuclear reactor analysis , 1976 .