Unconventional wearable energy harvesting from human horizontal foot motion

This paper presents an unconventional flat-type linear permanent magnetic generator based energy harvesting system which employs a cascaded boost-buck two-stage converter, with a maximum power control algorithm optimized for low frequency human horizontal foot motion, for Li-Ion battery charging. The dynamic model of the linear generator is built and the analytical equations for maximum power generation of non-resonant applications like human foot motion are derived. A double-sided stator linear machine with moving permanent magnet and soft magnetic spacer is designed. The Finite Element Analysis (FEA) is carried out on the designed geometric model to estimate the real-time voltage of energy harvester. A cascaded boost-buck converter with appropriate control is proposed to abstract maximum power from the linear generator and charge the Li-Ion battery with constant current at the same time. Under the typical human horizontal foot motion velocity of 4.5 m/s, the proposed energy harvester with the designed power conditioning circuit has power density as high as 8.5 mW/cm3.

[1]  Jan M. Rabaey,et al.  Improving power output for vibration-based energy scavengers , 2005, IEEE Pervasive Computing.

[2]  Penglin Niu,et al.  Design and Performance of Linear Biomechanical Energy Conversion Devices , 2006 .

[3]  Thad Starner,et al.  Human-Powered Wearable Computing , 1996, IBM Syst. J..

[4]  D. Winter,et al.  Biomechanical walking pattern changes in the fit and healthy elderly. , 1990, Physical therapy.

[5]  W. Thomson Theory of vibration with applications , 1965 .

[6]  R. McN. Alexander,et al.  Simple Models of Human Movement , 1995 .

[7]  Heath Hofmann,et al.  Adaptive piezoelectric energy harvesting circuit for wireless, remote power supply , 2001 .

[8]  Gerhard Tröster,et al.  Design and optimization of a linear vibration-driven electromagnetic micro-power generator , 2007 .

[9]  Alireza Khaligh,et al.  Dynamic Modeling and Optimum Load Control of a PM Linear Generator for Ocean Wave Energy Harvesting Application , 2009, 2009 Twenty-Fourth Annual IEEE Applied Power Electronics Conference and Exposition.

[10]  I. Batarseh,et al.  Maximum Energy Harvesting Control for Oscillating Energy Harvesting Systems , 2007, 2007 IEEE Power Electronics Specialists Conference.

[11]  Yang Xu,et al.  A hybrid energy scavenging topology for human-powered mobile electronics , 2008, 2008 34th Annual Conference of IEEE Industrial Electronics.

[12]  Peng Zeng,et al.  Kinetic Energy Harvesting Using Piezoelectric and Electromagnetic Technologies—State of the Art , 2010, IEEE Transactions on Industrial Electronics.

[13]  Joseph A. Paradiso,et al.  Energy Scavenging with Shoe-Mounted Piezoelectrics , 2001, IEEE Micro.

[14]  Jacek F. Gieras,et al.  Permanent magnet motor technology : design and applications , 1996 .

[15]  Joseph A. Paradiso,et al.  Parasitic power harvesting in shoes , 1998, Digest of Papers. Second International Symposium on Wearable Computers (Cat. No.98EX215).

[16]  M. Duffy,et al.  Electromagnetic generators for power harvesting , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[17]  Alireza Khaligh,et al.  A novel grid-tied, solar powered residential home with plug-in hybrid electric vehicle (PHEV) loads , 2009, 2009 IEEE Vehicle Power and Propulsion Conference.

[18]  Taeseung D. Yoo,et al.  Generating Electricity While Walking with Loads , 2022 .

[19]  M R Shorten,et al.  The energetics of running and running shoes. , 1993, Journal of biomechanics.

[20]  Alireza Khaligh,et al.  Three phase linear permanent magnet energy scavenger based on foot horizontal motion , 2010, 2010 Twenty-Fifth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).