Energetic and exergetic evaluation of flat plate solar collectors

Energy efficiency is generally used as one of the most important parameters in order to introduce and compare thermal systems including flat plate solar collectors despite of the fact that the first law of thermodynamics is not solely capable of demonstrating quantitative and qualitative performance of such systems. In this paper, a theoretical and comprehensive model for energy and exergy analysis of flat plate solar collectors is presented through which the effect of the entire design parameters on performance can be examined. Upon the verification and confirmation of the model based on the experimental data, effect of parameters such as fluid flow rate and temperature, type of working fluid and thickness of the back insulation on the energy and exergy efficiency of the collector has been examined and based on the analysis and comparison of results, the optimal working condition of the system has been determined. According to the results, designing the system with inlet water temperature approximately 40° more than the ambient temperature as well as a lower flow rate will enhance the overall performance.

[1]  Majdi Hazami,et al.  Energetic and exergetic performances of an economical and available integrated solar storage collector based on concrete matrix , 2010 .

[2]  Akio Suzuki,et al.  General theory of exergy-balance analysis and application to solar collectors , 1988 .

[3]  A. Bejan.  Fundamentals of exergy analysis, entropy generation minimization, and the generation of flow architecture , 2002 .

[4]  Y. Çengel,et al.  Thermodynamics : An Engineering Approach , 1989 .

[5]  R. Petela.  Exergy of Heat Radiation , 1964 .

[6]  Said Farahat,et al.  Exergetic optimization of flat plate solar collectors , 2009 .

[7]  Akio Suzuki,et al.  A Fundamental Equation for Exergy Balance on Solar Collectors , 1988 .

[8]  Arif Hepbasli,et al.  Exergetic modeling and performance evaluation of solar water heating systems for building applications , 2007 .

[9]  Han Kwong Wing,et al.  A second law concept of an equivalent solar collector , 1991 .

[10]  Hüseyin Benli,et al.  Experimentally derived efficiency and exergy analysis of a new solar air heater having different surface shapes , 2013 .

[11]  W. Beckman,et al.  Solar Engineering of Thermal Processes , 1985 .

[12]  M. Imtiaz Hussain,et al.  Experimental and numerical studies of a U-shaped solar energy collector to track the maximum CPV/T system output by varying the flow rate , 2015 .

[13]  J. Buzás,et al.  Transfer functions of solar collectors for dynamical analysis and control design , 2014 .

[14]  Deniz Alta,et al.  Experimental investigation of three different solar air heaters: Energy and exergy analyses , 2010 .

[15]  S. C. Kaushik,et al.  Exergetic performance evaluation and parametric studies of solar air heater , 2008 .

[16]  L. Fara,et al.  Determination of the optimal operation mode of a flat solar collector by exergetic analysis and numerical simulation , 2005 .

[17]  Fatih Koçyiğit,et al.  Energy and exergy analysis of a new flat-plate solar air heater having different obstacles on absorber plates , 2010 .