The design of an electrical capacitance tomography sensor for use with media of high dielectric permittivity

This paper concerns the application of electrical capacitance tomography (ECT) for media of high dielectric permittivity such as water. The performance of an ECT sensor was analysed numerically for a range of dielectric materials (1≤er≤80) and geometrical parameters. On the basis of numerical simulations an ECT sensor with internal electrodes was built. Experimental results concerned with imaging air voids in distilled water and water-continuous dispersions of oil, using a commercially available PTL tomography system, are presented. Effects arising from the conductivity of water are studied and prospects of using the ECT system in an `electrical resistivity' mode for weakly conductive solutions are outlined.

[1]  Wuqiang Yang,et al.  Hardware design of electrical capacitance tomography systems , 1996 .

[2]  Sanowar H. Khan,et al.  Finite element modelling of electrostatic fields in process tomography capacitive electrode systems for flow response evaluation , 1993 .

[3]  Maurice Beck,et al.  Capacitance-based instrumentation for multi-interface level measurement , 1991 .

[4]  Tomasz Dyakowski,et al.  RAPID COMMUNICATION: A capacitance probe for interface detection in oil and gas extraction plant , 1999 .

[5]  Tomasz Dyakowski,et al.  Applications of electrical tomography for gas-solids and liquid-solids flows : a review , 2000 .

[6]  Tomasz Dyakowski,et al.  An algorithm based on perturbation theory for electrical capacitance tomography , 1999 .

[7]  T. S. Ramu,et al.  On the Evaluation of Conductivity of Mixtures of Liquid Dielectrics , 1973, IEEE Transactions on Electrical Insulation.

[8]  Maurice Beck,et al.  A multi-interface level measurement system using a segmented capacitance sensor for oil separators , 1994 .

[9]  Tomasz Dyakowski,et al.  TOMOGRAPHIC STUDIES OF FLOW PATTERNS WITHIN A CIRCULATING FLUIDIZED BED , 1999 .

[10]  Xiaodong Jia,et al.  Analysis and flow regime identification of bubble column dynamics , 1999 .

[11]  R. C. Waterfall,et al.  Calibration of capacitance tomography systems for liquid-liquid dispersions , 1998 .

[12]  Brian S. Hoyle,et al.  Electrical capacitance tomography for flow imaging: system model for development of image reconstruction algorithms and design of primary sensors , 1992 .

[13]  Reidar Barfod Schüller,et al.  Advanced Profile Gauge for Multiphase Systems , 1999 .

[14]  Dieter Mewes,et al.  Investigation of the Two-Phase Countercurrent Flow In Structured Packings Using Capacitance Tomography , 1999 .

[15]  Denis Weaire,et al.  Measurement of Foam Density Profiles Using AC capacitance , 1995 .

[16]  Robert M. Fano,et al.  Electromagnetic Fields, Energy, and Forces , 1968 .

[17]  Wuqiang Yang,et al.  Electrical Capacitance Tomography — from Design to Applications , 1995 .

[18]  Richard A Williams,et al.  Real time visualisation and analysis of dense phase powder conveying , 1999 .