How hydrofractures become arrested

Fluids in the earth's crust are commonly transported by hydrofractures, such as dykes and mineral veins, many of which become arrested at various crustal depths. Hydrofractures are commonly arrested – some showing blunt tips – at contacts between soft (low Young's modulus) and stiff (high Young's modulus) layers. For example, many dyke tips are arrested at contacts between soft pyroclastic rocks and stiff basaltic lava flows, and vein tips at contacts between soft marl and stiff limestone. Theoretical models indicate that overpressured, buoyant hydrofractures in homogeneous, isotropic host rocks should normally reach the surface. In layered host rocks, however, abrupt changes in Young's moduli, horizontal discontinuities, and layers with unusually high fracture-perpendicular stresses encourage hydrofracture arrest. It is proposed that for layer-parallel loading, stiff layers favour hydrofracture arrest during active compression but soft layers during extension. It is concluded that for hydrofracture propagation to occur, the stress field along its potential pathway must be essentially homogenous.

[1]  Norman R. Warpinski.  Measurement of Width and Pressure in a Propagating Hydraulic Fracture , 1985 .

[2]  C. Neuzil,et al.  Groundwater in Geologic Processes , 1998 .

[3]  Laura Marinoni,et al.  Injection and arrest of dykes: implications for volcanic hazards , 1999 .

[4]  D. Maugis.  Rupture and Adherence of Elastic Solids , 2000 .

[5]  Agust Gudmundsson.  Emplacement of dikes, sills and crustal magma chambers at divergent plate boundaries , 1990 .

[6]  Agust Gudmundsson,et al.  Dykes, faults and palaeostresses in the Teno and Anaga massifs of Tenerife (Canary Islands) , 2000 .

[7]  M. Bonafede,et al.  On tensile cracks close to and across the interface between two welded elastic half-spaces , 1999 .

[8]  Agust Gudmundsson.  Effect of tensile stress concentration around magma chambers on intrusion and extrusion frequencies , 1988 .

[9]  D. Maugis.  Contact, Adhesion and Rupture of Elastic Solids , 2000 .

[10]  M. Bonafede,et al.  Displacement and gravity anomaly produced by a shallow vertical dyke in a cohesionless medium , 1995 .

[11]  Bezalel C. Haimson,et al.  Hydrofracturing stress measurements in the Iceland Research Drilling Project drill hole at Reydarfjordur, Iceland , 1982 .

[12]  Agust Gudmundsson,et al.  Fracture networks and fluid transport in active fault zones , 2001 .

[13]  T. Dahm.  Numerical simulations of the propagation path and the arrest of fluid‐filled fractures in the Earth , 2000 .

[14]  M. Bonafede,et al.  Near-field modifications of stress induced by dyke injection at shallow depth , 1997 .

[15]  Emmanuel M Detournay,et al.  The Tip Region of a Fluid-Driven Fracture in an Elastic Medium , 2000 .

[16]  Rodney J. Clifton,et al.  Containment of massive hydraulic fractures , 1978 .

[17]  E. Hauksson,et al.  Role of fluids in faulting inferred from stress field signatures , 1999, Science.

[18]  R. Schultz.  Limits on strength and deformation properties of jointed basaltic rock masses , 1995 .

[19]  Bernard Amadei,et al.  Rock stress and its measurement , 1997 .

[20]  Agust Gudmundsson.  Dynamics of Volcanic Systems in Iceland: Example of Tectonism and Volcanism at Juxtaposed Hot Spot and Mid-Ocean Ridge Systems , 2000 .

[21]  C. Yew.  Chapter One – Fracturing of a Wellbore and 2-D Fracture Models , 1997 .

[22]  Peter P. Valko,et al.  Hydraulic fracture mechanics , 1995 .