Shortcut methods for nonideal multicomponent distillation: 2. Complex columns

Shortcut methods are a prerequisite for the fast evaluation of alternatives in process design. The rectification body method (RBM) for calculating the minimum energy demand of homogeneous, azeotropic multicomponent distillation processes is presented. The new method incorporates both the classical Underwood technique and certain previously proposed techniques as special cases. It employs all pinch point branches of both column sections and thus requires no a priori selection of active pinch points. It is entirely general and can be applied to any type of split of nonideal and azeotropic mixtures irrespective of the number of components. Hence, it significantly extends previous results and practical applicability. Its features are highlighted through examples of nonideal separations with three, four, and five components.

[1]  Arthur W. Westerberg,et al.  A review of process synthesis , 1981 .

[3]  E. Blass,et al.  Minimum reflux calculations for nonideal mixtures using the reversible distillation model , 1991 .

[4]  P. Pöllmann,et al.  Investigation of vapour—liquid equilibrium of non-ideal multicomponent systems , 1996 .

[5]  L. M. Welch,et al.  Rectification in Ternary Systems Containing Binary Azeotropes , 1945 .

[6]  Michael F. Malone,et al.  New complex column arrangements for ideal distillation , 1986 .

[7]  Johann Stichlmair,et al.  Superstructures for the mixed integer optimization of nonideal and azeotropic distillation processes , 1996 .

[8]  E. Blass,et al.  Best products of homogeneous azeotropic distillations , 1994 .

[9]  E. Blass,et al.  A review on minimum energy calculations for ideal and nonideal distillations , 1995 .

[10]  Arthur W. Westerberg,et al.  Algorithm for Generating the Distillation Regions for Azeotropic Multicomponent Mixtures , 1997 .

[11]  Dale F. Rudd,et al.  Parametric studies in industrial distillation: Part I. Design comparisons , 1978 .

[12]  Arthur W. Westerberg,et al.  Shortcut methods for complex distillation columns. 1. Minimum reflux , 1981 .

[13]  Michael F. Malone,et al.  Approximate design of multiple-feed/side-stream distillation systems , 1987 .

[14]  J. M. Douglas,et al.  Simple, analytical criteria for the sequencing of distillation columns , 1985 .

[15]  Michael F. Malone,et al.  Nonideal Multicomponent Distillation: Use of Bifurcation Theory for Design , 1991 .

[16]  M. Doherty,et al.  On the dynamics of distillation processes-V: The topology of the boiling temperature surface and its relation to azeotropic distillation , 1984 .

[17]  B. Lu,et al.  On the determination of minimum reflux ratio for a multicomponent distillation column with any number of side-cut streams , 1970 .

[18]  William L. Luyben,et al.  Economics of Alternative Distillation Configurations for the Separation of Ternary Mixtures , 1978 .

[19]  Michael F. Doherty,et al.  Geometric behavior and minimum flows for nonideal multicomponent distillation , 1990 .

[20]  C. Floudas,et al.  Synthesis of general distillation sequences : nonsharp separations , 1990 .

[21]  S. Glanz,et al.  Calculating minimum reflux of nonideal multicomponent distillation using eigenvalue theory , 1994 .

[22]  A. W. Westerberg,et al.  The product composition regions of single-feed azeotropic distillation columns , 1992 .

[23]  Michael F. Malone Optimality Regions for Complex Column Alternatives in Distillation Systems , 1988 .

[24]  Rüdiger Seydel,et al.  Role of continuation in engineering analysis , 1987 .

[25]  Y. A. Liu,et al.  Studies in chemical process design and synthesis: Part V: A simple heuristic method for systematic synthesis of initial sequences for multicomponent separations , 1983 .

[26]  Zhi-Yong Liu,et al.  Heuristic procedure for the synthesis of distillation sequences with multicomponent products , 1995 .

[27]  Michael F. Doherty,et al.  Design and synthesis of homogeneous azeotropic distillations. 2. Minimum reflux calculations for nonideal and azeotropic columns , 1985 .

[28]  M. F. Malone,et al.  Feasibility of separations for distillation of nonideal ternary mixtures , 1993 .

[29]  Michael F. Malone,et al.  A geometric design method for side-stream distillation columns , 1996 .

[30]  Thomas Kuen,et al.  Minimum energy demand for distillations with distributed components and side-product withdrawals , 1994 .

[31]  Michael F. Doherty,et al.  On the dynamics of distillation processes—I: The simple distillation of multicomponent non-reacting, homogeneous liquid mixtures , 1978 .

[32]  Christodoulos A. Floudas,et al.  Synthesis of distillation sequences with several multicomponent feed and product streams , 1988 .

[33]  E. Kreuzer Numerische Untersuchung nichtlinearer dynamischer Systeme , 1987 .

[34]  Michael F. Malone,et al.  Minimum Vapor Flows in a Distillation Column with a Sidestream Stripper , 1985 .

[35]  Minimum reflux behavior of complex distillation columns , 1988 .

[36]  Arthur W. Westerberg,et al.  Temperature-heat diagrams for complex columns. 2. Underwood's method for side strippers and enrichers , 1989 .

[37]  Michael F. Malone,et al.  Design of Sidestream Distillation Columns , 1985 .

[38]  Wolfgang Marquardt,et al.  Minimum energy demand for nonideal multicomponent distillations in complex columns , 1996 .

[39]  J. Stichlmair,et al.  Zerlegung von Dreistoffgemischen durch Rektifikation , 1988 .

[40]  Z. Fidkowski,et al.  Minimum energy requirements of thermally coupled distillation systems , 1987 .