Direction sensitive bending sensors based on multi-wall carbon nanotube/epoxy nanocomposites

In the present work, a direction sensitive bending strain sensor consisting of a single block of epoxy/multi-wall carbon nanotube composite was developed. Moreover, the manufacturing could be realized in a straightforward single-step processing route. The directional sensitivity to bending deformations is related to the change in electrical resistance, which becomes positive or negative, depending on the direction of bending deflection. This effect is achieved by generating a gradient in electrical conductivity throughout the material. The resistance versus strain behaviour of these devices is investigated in detail and related to the microstructure of the nanocomposites.

[1]  I. Kinloch,et al.  Ultra-low electrical percolation threshold in carbon-nanotube-epoxy composites , 2003 .

[2]  P. Sheng,et al.  Observation of fluctuation modulation of tunnel junctions by applied ac stress in carbon polyvinylchloride composites , 1981 .

[3]  J. Zavickis,et al.  Polyisoprene—multi-wall carbon nanotube composites for sensing strain , 2007 .

[4]  K. Schulte,et al.  Carbon nanotube-reinforced epoxy-composites: enhanced stiffness and fracture toughness at low nanotube content , 2004 .

[5]  S. Radhakrishnan.  Effect of fillers on the electrical conduction in polymers: theory of internal conduction mechanism , 1985 .

[6]  Mark J. Schulz,et al.  A carbon nanotube strain sensor for structural health monitoring , 2006 .

[7]  Tsu-Wei Chou,et al.  Carbon nanotube-based health monitoring of mechanically fastened composite joints , 2008 .

[8]  N. Hu,et al.  Tunneling effect in a polymer/carbon nanotube nanocompositestrain sensor , 2008 .

[9]  K. Schulte,et al.  Can carbon nanotubes be used to sense damage in composites , 2004 .

[10]  Karl Schulte,et al.  Non-destructive testing of FRP by d.c. and a.c. electrical methods , 2001 .

[11]  J. M. Kikkawa,et al.  Very Low Conductivity Threshold in Bulk Isotropic Single‐Walled Carbon Nanotube–Epoxy Composites , 2005 .

[12]  Ping Sheng,et al.  Fluctuation-Induced Tunneling Conduction in Carbon-Polyvinylchloride Composites , 1978 .

[13]  Chunyu Li,et al.  Dominant role of tunneling resistance in the electrical conductivity of carbon nanotube-based composites , 2007 .

[14]  S. Paulson,et al.  In situ resistance measurements of strained carbon nanotubes , 1999, cond-mat/9905304.

[15]  Hiroaki Yanagida,et al.  Hybrid composites with self-diagnosing function for preventing fatal fracture , 2001 .

[16]  K. Schulte,et al.  Two percolation thresholds in carbon nanotube epoxy composites , 2007 .

[17]  A. Sircar,et al.  Electrical Properties of Stretched Carbon Black Loaded Vulcanizates , 1969 .

[18]  W Zhang,et al.  Carbon nanotube/polycarbonate composites as multifunctional strain sensors. , 2006, Journal of nanoscience and nanotechnology.

[19]  Tsu-Wei Chou,et al.  Real-time in situ sensing of damage evolution in advanced fiber composites using carbon nanotube networks , 2008, Nanotechnology.

[20]  Panchanan Pramanik,et al.  Effect of extensional strain on the resistivity of electrically conductive nitrile-rubber composites filled with carbon filler , 1993 .

[21]  Werner J. Blau,et al.  Experimental observation of scaling laws for alternating current and direct current conductivity in polymer-carbon nanotube composite thin films , 2002 .

[22]  C. Gómez-Navarro,et al.  Studying electrical transport in carbon nanotubes by conductance atomic force microscopy , 2006 .

[23]  Ping Sheng,et al.  Fluctuation-induced tunneling conduction in disordered materials , 1980 .

[24]  D.D.L. Chung,et al.  Short-carbon-fiber-reinforced epoxy as a piezoresistive strain sensor , 1995 .

[25]  Karl Schulte,et al.  Load and health monitoring in glass fibre reinforced composites with an electrically conductive nanocomposite epoxy matrix , 2008 .

[26]  T. Chou,et al.  Carbon Nanotube Networks: Sensing of Distributed Strain and Damage for Life Prediction and Self Healing , 2006 .

[27]  N. Koratkar,et al.  In situ health monitoring and repair in composites using carbon nanotube additives , 2007 .