Apparatus for accurate measurement of interface resistance of high performance thermal interface materials

This manuscript describes a systematic and rational design of an experimental apparatus based on ASTM D-5470 standard for thermal interface resistance measurement of high performance thermal interface materials (TIM). The apparatus is intended to provide measurement of TIM thermal resistance as low as 0.065 K-cm/sup 2//W within 10% experimental uncertainty. The key points addressed are: 1) Apparatus design to obtain accurate measurement of TIM surface temperatures and heat flux, 2) Effects of surface flatness and roughness, and 3) Importance of and methods for surface cleaning. Design criteria are presented for choosing temperature sensors, their installation method, meter-bar material and thickness. The temperature sensors in the meter-bars should be located a sufficient distance from the heaters to ensure uniform heat flux in the thermal sensor region. Cooling plate design specifications, and a method for applying interface pressure are described. Experimental data are presented on a new TIM having 0.058 K-cm/sup 2//W interface resistance with 138 kPa contact pressure, which is lower than commercially available thermal grease and phase change materials.

[1]  R. L. Webb,et al.  Performance and testing of thermal interface materials , 2003, Microelectron. J..

[2]  G. L. Solbrekken,et al.  The development of a tool to predict package level thermal interface material performance , 2000, ITHERM 2000. The Seventh Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (Cat. No.00CH37069).

[3]  M. Kedzierski,et al.  Design and Machining of Copper Specimens with Micro Holes for Accurate Heat Transfer Measurements , 1993 .

[4]  Frank P. Incropera,et al.  Fundamentals of Heat and Mass Transfer , 1981 .

[5]  B. Rauch.  Understanding the performance characteristics of phase-change thermal interface materials , 2000, ITHERM 2000. The Seventh Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (Cat. No.00CH37069).

[6]  Jing Wen Tzeng,et al.  Technical review on thermal conductivity measurement techniques for thin thermal interfaces , 2000, Sixteenth Annual IEEE Semiconductor Thermal Measurement and Management Symposium (Cat. No.00CH37068).

[7]  Robert J. Moffat,et al.  Describing the Uncertainties in Experimental Results , 1988 .

[8]  R. Webb,et al.  Low melting point thermal interface material , 2002, ITherm 2002. Eighth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (Cat. No.02CH37258).