Influence of operational parameters on the performance of PEMFCs with serpentine flow field channels having different (rectangular and trapezoidal) cross-section shape

Abstract The effect of operational parameters on the performance of PEMFCs by using serpentine flow field channels with different (rectangular and trapezoidal) cross-section shape has been investigated. More than cell temperature and pressure, reactant humidification temperature (Tha,c) has a significant influence on the effect of serpentine channels with trapezoidal cross-section on cell performance. The high capability of water removal by serpentine channels with trapezoidal cross-section positively affects the fuel cell performance when the water content in the system is high, as in the case of the reactant humidification temperature higher than cell temperature (Tc). On the contrary, when the water content in the cell is low, as in the case of Tha,c = Tc, the high ability of water removal of serpentine channels with trapezoidal cross-section results in a less effective membrane/cathode hydration. Conversely, the effect of Tha,c on the performance of the cell with serpentine channels with rectangular cross-section is negligible.

[1]  Ned Djilali,et al.  Numerical investigation of water droplet dynamics in a low-temperature fuel cell microchannel: Effect of channel geometry , 2010 .

[2]  Thomas A. Trabold,et al.  Effects of Flow Field and Diffusion Layer Properties on Water Accumulation in a PEM Fuel Cell , 2007 .

[3]  C. Rayment,et al.  Introduction to Fuel Cell Technology , 2003 .

[4]  W. Lehnert,et al.  Development of a stack having an optimized flow field structure with low cross transport effects , 2006 .

[5]  Lan Sun,et al.  A numerical study of channel-to-channel flow cross-over through the gas diffusion layer in a PEM-fuel-cell flow system using a serpentine channel with a trapezoidal cross-sectional shape , 2006 .

[6]  M. Garmendia Mujika,et al.  Numerical analysis of the influence of the channel cross-section aspect ratio on the performance of a PEM fuel cell with serpentine flow field design , 2011 .

[7]  Ramana G. Reddy,et al.  Effect of channel dimensions and shape in the flow-field distributor on the performance of polymer electrolyte membrane fuel cells , 2003 .

[8]  Edson A. Ticianelli,et al.  Development and electrochemical studies of gas diffusion electrodes for polymer electrolyte fuel cells , 1996 .

[9]  D. Wilkinson,et al.  Anode and cathode overpotentials and temperature profiles in a PEMFC , 2012 .

[10]  E. Antolini,et al.  Review in Applied Electrochemistry. Number 54 Recent Developments in Polymer Electrolyte Fuel Cell Electrodes , 2004 .

[11]  Suresh G. Advani,et al.  On the relative influence of convection in serpentine flow fields of PEM fuel cells , 2006 .

[12]  Byungki Ahn,et al.  Parametric study of the channel design at the bipolar plate in PEMFC performances , 2008 .

[13]  Werner Lehnert,et al.  Investigation on the influence of channel geometries on PEMFC performance , 2006 .

[14]  Jiujun Zhang,et al.  A review of water flooding issues in the proton exchange membrane fuel cell , 2008 .

[15]  Brant A. Peppley,et al.  Modeling the Influence of GDL and flow-field plate parameters on the reaction distribution in the PEMFC cathode catalyst layer , 2005 .

[16]  Xianguo Li,et al.  Review of bipolar plates in PEM fuel cells: Flow-field designs , 2005 .

[17]  Hyung Jin Sung,et al.  Effects of channel geometrical configuration and shoulder width on PEMFC performance at high current density , 2006 .

[18]  Chang-Soo Kim,et al.  Effects of channel and rib widths of flow field plates on the performance of a PEMFC , 2005 .

[19]  Xabier Garikano,et al.  Influence of geometric parameters of the flow fields on the performance of a PEM fuel cell. A review , 2012 .

[20]  Ay Su,et al.  A three-dimensional full-cell CFD model used to investigate the effects of different flow channel designs on PEMFC performance , 2007 .

[21]  Sirivatch Shimpalee,et al.  The impact of channel path length on PEMFC flow-field design , 2006 .

[22]  Lin Wang,et al.  A parametric study of PEM fuel cell performances , 2003 .

[23]  Soosan Rowshanzamir,et al.  Effects of operating parameters on performance of a proton exchange membrane fuel cell , 2006 .