论文信息 - Failure analysis of a reheater tube dissimilar metal weld failure in a 500 MW power plant - 字舞流文

Failure analysis of a reheater tube dissimilar metal weld failure in a 500 MW power plant

A. Varma | R. K. Yadavalli

[1] Jianan Hu,et al. Effect of weld angle on the creep rupture life of ferritic/austenitic dissimilar weld interfaces under remote mode I fracture , 2019, Engineering Fracture Mechanics.

[2] Jianan Hu,et al. Modelling of creep rupture of ferritic/austenitic dissimilar weld interfaces under mode I fracture , 2018 .

[3] Jianan Hu,et al. An evaluation of creep rupture strength of ferritic/austenitic dissimilar weld interfaces using cohesive zone modelling , 2016 .

[4] A. Malik,et al. Premature failure of dissimilar metal weld joint at intermediate temperature superheater tube , 2015 .

[5] Mohsen A. Hassan,et al. High operating steam pressure and localized overheating of a primary superheater tube , 2012 .

[6] M. D. Mathew,et al. A Comparison of Creep Rupture Strength of Ferritic/Austenitic Dissimilar Weld Joints of Different Grades of Cr-Mo Ferritic Steels , 2012, Metallurgical and Materials Transactions A.

[7] Ahmad Kamal Kadir,et al. Failure analysis of high temperature superheater tube (HTS) of a pulverized coal-fired power station , 2011 .

[8] M. Tabuchi,et al. Creep Rupture Properties of Welded Joints of Heat Resistant Steels , 2008 .

[9] R. L. Klueh,et al. Austenitic stainless steel-ferritic steel weld joint failures , 1982 .