The role of inorganic fillers in silicone rubber for outdoor insulation alumina tri-hydrate or silica

A systematic study to understand how alumina tri-hydrate (ATH) and silica fillers improve the erosion resistance of silicone rubber during dry band arcing showed that the thermal conductivity of the resulting composite material is the main criterion governing material erosion. The thermal conductivity of the composite material is dependent on the thermal conductivity, concentration, particle size, and bonding of the filler particles to the silicone matrix. In this context, either filler can be shown to perform better than the other, depending on the formulation, in the ASTM inclined plane tracking and erosion test. Therefore, the industry perception that ATH filler imports better erosion resistance than silica in silicone rubber can be misleading. The release of water of hydration from ATH appears to have a secondary effect that may be more relevant in silicone compositions having a low concentration of a filler.

[1]  R. Chang,et al.  Analysis of electrical activity associated with inclined-plane tracking and erosion of insulating materials , 2000 .

[2]  E. Cherney,et al.  Thermal characteristics of filled silicone rubber under laser heating , 2003, 2003 Annual Report Conference on Electrical Insulation and Dielectric Phenomena.

[3]  R. Hackam,et al.  The loss and recovery of hydrophobicity of RTV silicone rubber insulator coatings , 1990 .

[4]  R. Hackam,et al.  The electrical performance of polymeric insulating materials under accelerated aging in a fog chamber , 1988 .

[5]  R. Landel,et al.  Mechanical Properties of Polymers and Composites , 1993 .

[6]  Sigbritt Karlsson,et al.  Aging of silicone rubber under ac or dc voltages in a coastal environment , 2001 .

[7]  A. El-Hag,et al.  Fundamental and low frequency harmonic components of leakage current as a diagnostic tool to study aging of RTV and HTV silicone rubber in salt-fog , 2003 .

[8]  R. Hackam.  Outdoor HV composite polymeric insulators , 1999, IEEE Transactions on Dielectrics and Electrical Insulation.

[9]  M. Shah,et al.  Polymer outdoor insulating materials. Part III-Silicone elastomer considerations , 1997 .

[10]  J. Mackevich,et al.  Polymer outdoor insulating materials. II. Material considerations , 1997 .

[11]  R. Hackam,et al.  Effects of filler level in RTV silicone rubber coatings used in HV insulators , 1992 .

[12]  W. Duley,et al.  Thermal characteristics of silicone rubber filled with ATH and silica under laser heating , 2002, Annual Report Conference on Electrical Insulation and Dielectric Phenomena.

[13]  R. Hackam,et al.  Performance of Polymeric Insulating Materials in Salt-Fog , 1987, IEEE Transactions on Power Delivery.

[14]  N. Yoshimura,et al.  Tracking and erosion of HTV silicone rubber and suppression mechanism of ATH , 2001 .

[15]  D. Koenig,et al.  Multifactor-surface-tests of organic insulating materials in the early stage of degradation , 1996, Conference Record of the 1996 IEEE International Symposium on Electrical Insulation.

[16]  J. C. Jaeger,et al.  Conduction of Heat in Solids , 1952 .

[17]  E. Cherney,et al.  Correlation of damage, dry band arcing energy, and temperature in inclined plane testing of silicone rubber for outdoor insulation , 2004, IEEE Transactions on Dielectrics and Electrical Insulation.

[18]  N. Yoshimura,et al.  Tracking and erosion of HTV silicone rubbers of different thickness , 2001 .