Geometrical optimization and electrical performance comparison of thin-film tandem structures based on pm-Si:H and μc-Si:H using computer simulation

This article investigates the optimal efficiency of a photovoltaic system based on a silicon thin film tandem cell using polymorphous and microcrystalline silicon for the top and bottom elementary cells, respectively. Two ways of connecting the cells are studied and compared: (1) a classical structure in which the two cells are electrically and optically coupled; and (2) a new structure for which the “current-matching” constraint is released by the electrical decoupling of the two cells. For that purpose, we used a computer simulation to perform geometrical optimization of the studied structures as well as their electrical performance evaluation. The simulation results show that the second structure is more interesting in terms of efficiency.

[1]  W. Palz,et al.  Photovoltaic solar energy conference , 1981 .

[2]  A. Shah,et al.  Thin‐film silicon solar cell technology , 2004 .

[3]  Arvind Shah,et al.  Amorphous solar cells, the micromorph concept and the role of VHF-GD deposition technique , 2004 .

[4]  Gilles Patriarche,et al.  Synthesis of silicon nanocrystals in silane plasmas for nanoelectronics and large area electronic devices , 2007 .

[5]  C. Wronski,et al.  Effect of midgap states in intrinsic hydrogenated amorphous silicon on sub‐band‐gap photoconductivity , 1991 .

[6]  R. Street,et al.  States in the Gap in Glassy Semiconductors , 1975 .

[7]  P. Cabarrocas,et al.  Why does the open-circuit voltage in a micro-crystalline silicon PIN solar cell decrease with increasing crystalline volume fraction? , 2008 .

[8]  Madoka Takai,et al.  Control of plasma chemistry for preparing highly stabilized amorphous silicon at high growth rate , 2003 .

[9]  D. Staebler,et al.  Reversible conductivity changes in discharge‐produced amorphous Si , 1977 .

[10]  Jean-Paul Kleider,et al.  Device grade hydrogenated polymorphous silicon deposited at high rates , 2008 .

[11]  Modeling of reverse bias dark currents in pin structures using amorphous and polymorphous silicon , 2004 .

[12]  Jean-Paul Kleider,et al.  Properties of a new a-Si:H-like material: hydrogenated polymorphous silicon , 1998 .

[13]  C. Privato,et al.  Influence of microcrystalline silicon bottom cell on micromorph tandem solar cell performance , 2008 .

[14]  Jean-Paul Kleider,et al.  Very low densities of localized states at the Fermi level in hydrogenated polymorphous silicon from capacitance and space-charge-limited current measurements , 1999 .

[15]  M. Kondo,et al.  Thin film solar cells incorporating microcrystalline Si1–xGex as efficient infrared absorber: an application to double junction tandem solar cells , 2010 .

[16]  Brent P. Nelson,et al.  Amorphous silicon films and solar cells deposited by HWCVD at ultra-high deposition rates , 2002 .

[17]  Remo Guidieri.  Res , 1995, RES: Anthropology and Aesthetics.

[18]  Yuzo Mori,et al.  Characterization of intrinsic amorphous silicon layers for solar cells prepared at extremely high rates by atmospheric pressure plasma chemical vapor deposition , 2005 .

[19]  Andrew G. Glen,et al.  APPL , 2001 .

[20]  Diego Fischer,et al.  Microcrystalline/micromorph silicon thin-film solar cells prepared by VHF-GD technique , 2001 .

[21]  The open-circuit voltage in microcrystalline silicon solar cells of different degrees of crystallinity , 2008 .

[22]  Winer,et al.  Defect equilibria in undoped a-Si:H. , 1989, Physical review. B, Condensed matter.

[23]  F. A. Rubinelli,et al.  Characteristic curves of hydrogenated amorphous silicon based solar cells modeled with the defect pool model , 2007 .

[24]  Jean-Paul Kleider,et al.  Midgap density of states in hydrogenated polymorphous silicon , 1999 .