Research on IPMSM Drive System Control Technology for Electric Vehicle Energy Consumption

At present, most of the existing control strategies of motor drive system are based on the motor itself, without considering the electric vehicle energy consumption from the perspective of the whole vehicle. Hence, a motor drive system control strategy for electric vehicle energy consumption is proposed in this paper. Combining the electric vehicle driving state with the control of interior permanent magnet synchronous motor (IPMSM), the maximum torque per ampere (MTPA) control strategy of electric vehicle IPMSM based on optimization acceleration curve is established. Then, the proposed method is verified by both Matlab/Simulink simulation and experiment. The simulation and experimental results show that compared with the NEDC urban conditions, the driving range of the electric vehicle drive system control strategy based on optimization acceleration curve has been improved a lot, and the energy consumption per kilometer has also been reduced, which verifies the feasibility and effectiveness of the proposed control strategy.

[1]  Liu Ren Improved maximum torque per ampere control strategy study for PMSM used in electric vehicles , 2012 .

[2]  Ali Emadi,et al.  MTPA Fitting and Torque Estimation Technique Based on a New Flux-Linkage Model for Interior-Permanent-Magnet Synchronous Machines , 2017, IEEE Transactions on Industry Applications.

[3]  Hao Chen,et al.  Research on the Performances and Parameters of Interior PMSM Used for Electric Vehicles , 2016, IEEE Transactions on Industrial Electronics.

[4]  Jian Wang,et al.  A Novel MTPA Control Strategy for IPMSM Drives by Space Vector Signal Injection , 2017, IEEE Transactions on Industrial Electronics.

[5]  Kay Hameyer,et al.  High-Performance Adaptive Torque Control for an IPMSM With Real-Time MTPA Operation , 2017, IEEE Transactions on Energy Conversion.

[6]  Narayan C. Kar,et al.  Direct Calculation of Maximum-Torque-Per-Ampere Angle for Interior PMSM Control Using Measured Speed Harmonic , 2018, IEEE Transactions on Power Electronics.

[7]  Dietmar Göhlich,et al.  Energy-Efficient Toque Allocation Design of Traction and Regenerative Braking for Distributed Drive Electric Vehicles , 2018, IEEE Transactions on Vehicular Technology.

[8]  Seung-Ki Sul,et al.  Torque Control Strategy of an IPMSM Considering the Flux Variation of the Permanent Magnet , 2007, 2007 IEEE Industry Applications Annual Meeting.

[9]  Shoudao Huang,et al.  Maximum torque per ampere and flux-weakening control for PMSM based on curve fitting , 2010, 2010 IEEE Vehicle Power and Propulsion Conference.

[10]  S. Bolognani,et al.  Automatic tracking of MTPA trajectory in IPM motor drives based on AC current injection , 2009, 2009 IEEE Energy Conversion Congress and Exposition.

[11]  Seung-Ki Sul,et al.  Maximum Torque per Ampere (MTPA) Control of an IPM Machine Based on Signal Injection Considering Inductance Saturation , 2013, IEEE Transactions on Power Electronics.

[12]  Ambrish Chandra,et al.  Effects of Rotor Position Error in the Performance of Field-Oriented-Controlled PMSM Drives for Electric Vehicle Traction Applications , 2016, IEEE Transactions on Industrial Electronics.

[13]  Shigeo Morimoto,et al.  Direct Calculation Method of Reference Flux Linkage for Maximum Torque per Ampere Control in DTC-Based IPMSM Drives , 2017, IEEE Transactions on Power Electronics.

[14]  Ali Emadi,et al.  Speed Range Extended Maximum Torque Per Ampere Control for PM Drives Considering Inverter and Motor Nonlinearities , 2017, IEEE Transactions on Power Electronics.

[15]  Seung-Ki Sul,et al.  Online Minimum-Copper-Loss Control of an Interior Permanent-Magnet Synchronous Machine for Automotive Applications , 2006, IEEE Transactions on Industry Applications.

[16]  Bing Cheng,et al.  Torque Feedforward Control Technique for Permanent Magnet Synchronous Motors , 2007, IECON 2007 - 33rd Annual Conference of the IEEE Industrial Electronics Society.

[17]  Haipeng Liu,et al.  Power Management Comparison for a Dual-Motor-Propulsion System Used in a Battery Electric Bus , 2017, IEEE Transactions on Industrial Electronics.

[18]  Xin Ma,et al.  Realization of Maximum Torque per Ampere Control for IPMSM Based on Inductance Segmentation , 2018, IEEE Access.

[19]  Jiabin Wang,et al.  Maximum Torque Per Ampere (MTPA) Control for Interior Permanent Magnet Synchronous Machine Drives Based on Virtual Signal Injection , 2015, IEEE Transactions on Power Electronics.

[20]  Serhiy Bozhko,et al.  Maximum Torque-per-Amp Control for Traction IM Drives: Theory and Experimental Results , 2017, IEEE Transactions on Industry Applications.

[21]  Wu Xiao-yi STUDY OF A MAXIMUM RATIO OF TORQUE TO CURRENT CONTROL METHOD FOR PMSM , 2005 .

[22]  Shuang Wang,et al.  An Improved Position-Sensorless Control Method at Low Speed for PMSM Based on High-Frequency Signal Injection into a Rotating Reference Frame , 2019, IEEE Access.

[23]  Shigeo Morimoto,et al.  Maximum Torque Per Ampere Control of a Direct Torque-Controlled PMSM in a Stator Flux Linkage Synchronous Frame , 2016, IEEE Transactions on Industry Applications.

[24]  S. Morimoto,et al.  Mathematical Model for MTPA Control of Permanent-Magnet Synchronous Motor in Stator Flux Linkage Synchronous Frame , 2015, IEEE Transactions on Industry Applications.

[25]  Li Shuai Adaptive speed tracking control of electric vehicles driven by permanent magnet synchronous motor , 2011 .