A flexible electro-rheological microvalve (FERV) based on SU-8 cantilever structures and its application to microactuators

On purpose to realize flexible electro-rheological microactuators (FERMA), this paper presents a MEMS-based flexible ER microvalve (FERV) by integrating thin SU-8 cantilever structures and the SU-8-sandwiched microfluidic channels for homogeneous ER fluids. The structure of the FERV is the fluidic channel-embedded cantilever. The FERV is successfully fabricated with 5 mm in length, 2.4 mm in width and 0.2 mm in thickness and the bending of the FERV shows enough flexibility. The static and dynamic characteristics of the FERV are experimentally investigated. The controllable pressure change rate of the FERV is about 70% of the supply pressure and the step-up response time is about 0.25 s. There is not such a difference of the static and dynamic performance between a straight FERV and a bent FERV, showing that bending does not affect the characteristics of the FERV. A bellows-type FERMA is realized and its elongation is 4.8 mm. The experimental results prove the feasibility of FERMA.

[1]  Nicholas K. Petek.  An Electronically Controlled Shock Absorber Using Electrorheological Fluid , 1992 .

[2]  Kazuhiro Yoshida,et al.  An In-Pipe Mobile Micromachine Using Fluid Power : A Mechanism Adaptable to Pipe Diameters , 2000 .

[3]  Eckhard Wendt,et al.  A New Type of Hydraulic Actuator Using Electrorheological Fluids , 1999 .

[4]  R. D. Ervin,et al.  A preliminary parametric study of electrorheological dampers , 1994 .

[5]  Seung-Bok Choi,et al.  Feedback Control of Tension in a Moving Tape Using an ER Brake Actuator , 1997 .

[6]  Kazuhiro Yoshida,et al.  Study of Valve-Integrated Microactuator Using Homogeneous Electro-Rheological Fluid , 2005 .

[7]  Seung-Bok Choi,et al.  PERFORMANCE ANALYSIS OF AN ENGINE MOUNT FEATURING ER FLUIDS AND PIEZOACTUATORS , 1996 .

[8]  S. Konishi,et al.  Thin flexible end-effector using pneumatic balloon actuator , 2000 .

[9]  W. M. Winslow.  Induced Fibration of Suspensions , 1949 .

[10]  S. Yokota,et al.  Fabrication of micro electro-rheological valves (ER valves) by micromachining and experiments , 2002 .

[11]  Ulrike Wallrabe,et al.  Mechanical properties of silicones for MEMS , 2008 .

[12]  Dominiek Reynaerts,et al.  The use of liquid crystals as electrorheological fluids in microsystems : model and measurements , 2006 .

[13]  H. Tanaka,et al.  Applying a flexible microactuator to robotic mechanisms , 1992, IEEE Control Systems.

[14]  D. Askeland,et al.  The science and engineering of materials , 1984 .

[15]  Andrea Manuello Bertetto,et al.  A Novel Fluidic Bellows Manipulator , 2004, J. Robotics Mechatronics.

[16]  Shin Morishita,et al.  An electronically controlled engine mount using electro-rheological fluid , 1992 .

[17]  M. Despont,et al.  SU-8: a low-cost negative resist for MEMS , 1997 .

[18]  Dong-Woo Cho,et al.  Development of a micro-bellows actuator using micro-stereolithography technology , 2006 .

[19]  Alain Blouin,et al.  All-optical measurement of in-plane and out-of-plane Young's modulus and Poisson's ratio in silicon wafers by means of vibration modes , 2004 .