Microstructure and mechanical properties of 2195 alloys prepared by traditional casting and spray forming

[1]  Guoqun Zhao,et al.  Effects of extrusion parameters and post-heat treatments on microstructures and mechanical properties of extrusion weld seams in 2195 Al-Li alloy profiles , 2020 .

[2]  M. Barati,et al.  Nonlinear forced vibrations of sandwich smart nanobeams with two-phase piezo-magnetic face sheets , 2019, The European Physical Journal Plus.

[3]  Guoqun Zhao,et al.  Effect of inter-annealing between two stages of extrusion on the microstructure and mechanical property for spray deposited Al–Cu–Li alloy 2195 , 2019, Journal of Materials Research and Technology.

[4]  M. Barati,et al.  Dynamic response of metal foam FG porous cylindrical micro-shells due to moving loads with strain gradient size-dependency , 2019, The European Physical Journal Plus.

[5]  N. Nayan,et al.  Effect of equal channel angular pressing (ECAP) on the evolution of texture, microstructure and mechanical properties in the Al-Cu-Li alloy AA2195 , 2019, Journal of Alloys and Compounds.

[6]  M. Barati,et al.  Dynamic response of functionally graded graphene nanoplatelet reinforced shells with porosity distributions under transverse dynamic loads , 2019, Materials Research Express.

[7]  Guoqun Zhao,et al.  Microstructure analysis and low-cycle fatigue behavior of spray-formed Al–Li alloy 2195 extruded plate , 2019, Materials Science and Engineering: A.

[8]  Xianfeng Li,et al.  Effects of nanosized particles on microstructure and mechanical properties of an aged in-situ TiB2/Al-Cu-Li composite , 2019, Materials Science and Engineering: A.

[9]  Shangwu Xiong,et al.  Characterization of hot extrusion and heat treatment on mechanical properties in a spray formed ultra-high strength Al-Zn-Mg-Cu alloy , 2018, Materials Characterization.

[10]  D. Song,et al.  Effect of equal-channel angular pressing and post-aging on impact toughness of Al-Li alloys , 2018, Materials Science and Engineering: A.

[11]  Z. Zheng,et al.  Effect of aging treatment on microstructures, tensile properties and intergranular corrosion behavior of Al–Cu–Li alloy , 2018, Materials Characterization.

[12]  Guoqun Zhao,et al.  Microstructures and mechanical properties of spray deposited 2195 Al-Cu-Li alloy through thermo-mechanical processing , 2018, Materials Science and Engineering: A.

[13]  Xuesong Zhang,et al.  Recent advances in the development of aerospace materials , 2018 .

[14]  Yong-bo Xu,et al.  Strengthening mechanisms, deformation behavior, and anisotropic mechanical properties of Al-Li alloys: A review , 2017, Journal of advanced research.

[15]  Sandeep Kumar,et al.  The Influence of Cold Forging Process on the Microstructure, Porosity and Wear Behavior of Spray Formed Al-Si Alloys , 2018 .

[16]  Pei Wang,et al.  Effects of Mg and Cu on microstructures and properties of spray-deposited Al-Zn-Mg-Cu alloys , 2017 .

[17]  A. Deschamps,et al.  Influence of Mg, Ag and Zn minor solute additions on the precipitation kinetics and strengthening of an Al-Cu-Li alloy , 2017 .

[18]  L. Ceschini,et al.  Thermal stability of the lightweight 2099 Al-Cu-Li alloy: Tensile tests and microstructural investigations after overaging , 2017 .

[19]  C. Luo,et al.  The influence of grain structure on the corrosion behaviour of 2A97-T3 Al-Cu-Li alloy , 2017 .

[20]  D. H. Li,et al.  Effect of Different Aging Processes on the Microstructure and Mechanical Properties of a Novel Al-Cu-Li Alloy , 2016 .

[21]  Huijun Li,et al.  Microstructural evolution, mechanical property and thermal stability of Al–Li 2198-T8 alloy processed by high pressure torsion , 2016 .

[22]  Ravi Kumar,et al.  Effect of scandium addition on the microstructure, mechanical and wear properties of the spray formed hypereutectic aluminum–silicon alloys , 2015 .

[23]  Jizi Liu,et al.  Formation mechanism of precipitate T1 in AlCuLi alloys , 2015 .

[24]  W. Zeng,et al.  Ageing response of a Al–Cu–Li 2198 alloy , 2014 .

[25]  N. Nayan,et al.  Mechanical properties of aluminium–copper–lithium alloy AA2195 at cryogenic temperatures , 2014 .

[26]  Constantinos Soutis,et al.  Recent developments in advanced aircraft aluminium alloys , 2014 .

[27]  C. Bolfarini,et al.  Microstructure and mechanical properties of a spray formed and extruded AA7050 recycled alloy , 2014 .

[28]  G. Appa Rao,et al.  Influence of Hot Isostatic Pressing on the Microstructure and Mechanical Properties of a Spray-Formed Al-4.5 wt.% Cu Alloy , 2014, Journal of Materials Engineering and Performance.

[29]  P. Ma,et al.  Hot deformation behavior of spray-deposited Al-Zn-Mg-Cu alloy , 2014 .

[30]  Y. Lin,et al.  Microstructures and properties of 2099 Al-Li alloy , 2013 .

[31]  N. Nayan,et al.  Processing and characterization of Al–Cu–Li alloy AA2195 undergoing scale up production through the vacuum induction melting technique , 2013 .

[32]  A. Deschamps,et al.  The influence of Cu/Li ratio on precipitation in Al-Cu-Li-x alloys , 2013 .

[33]  R. Rioja,et al.  The Evolution of Al-Li Base Products for Aerospace and Space Applications , 2012, Metallurgical and Materials Transactions A.

[34]  N. Nayan,et al.  Processing and Characterization of Al-Cu-Li Alloy AA2195 , 2012 .

[35]  A. Deschamps,et al.  Atomic structure of T1 precipitates in Al–Li–Cu alloys revisited with HAADF-STEM imaging and small-angle X-ray scattering , 2011 .

[36]  B. P. Kashyap,et al.  Processing map for hot working of spray formed and hot isostatically pressed Al–Li alloy (UL40) , 2009 .

[37]  P. Grant,et al.  Pitting corrosion of spray formed Al–Li–Mg alloys , 2008 .

[38]  A. Harsha,et al.  Spray forming of aluminum alloys and its composites: an overview , 2008 .

[39]  P. Grant,et al.  Solidification in Spray Forming , 2007 .

[40]  S. Tsurekawa,et al.  Grain boundary hardening and triple junction hardening in polycrystalline molybdenum , 2005 .

[41]  E. A. Starke,et al.  Progress in structural materials for aerospace systems , 2003 .

[42]  N. Prasad,et al.  Mechanical behaviour of aluminium-lithium alloys , 2003 .

[43]  E. Lavernia,et al.  Chapter 7 Spray-forming , 1999 .

[44]  E. Lavernia,et al.  Low-pressure spray forming of 2024 aluminum alloy , 1998 .

[45]  B. Cantor,et al.  Development of microstructure in spray formed alloys , 1997 .

[46]  M. Wu,et al.  An energy analysis of triple junction crack nucleation due to the wedging action of grain boundary dislocations , 1996 .

[47]  S. Annavarapu,et al.  Inhibited coarsening of solid-liquid microstructures in spray casting at high volume fractions of solid , 1995 .

[48]  R. Rioja,et al.  TB precipitates in an Al-Cu-Li alloy , 1991 .

[49]  B. Cantor,et al.  Spray forming of aluminium-copper alloys , 1991 .

[50]  E. Lavernia,et al.  Spray deposition of metals: A review , 1988 .