论文信息 - Fabrication and Characteristics of HTS Induction Motor by the Use of Bi-2223/Ag Squirrel-Cage Rotor

Fabrication and Characteristics of HTS Induction Motor by the Use of Bi-2223/Ag Squirrel-Cage Rotor

HTS squirrel-cage induction motor was fabricated and tested in this study. Both of rotor bars and end rings were made of Bi-2223/Ag multifilamentary tapes in order to realize superconducting current loops, and the conventional (normal conducting) stator, 3-phase and 4-pole, was utilized. Rotating characteristics of the fabricated motor were tested for different input voltages at 60 Hz. The performances were also analyzed by means of the theoretical method based on the electrical equivalent circuit. It was shown that the minimum starting voltage was experimentally confirmed and agreed semi-quantitatively with the analysis result. The rotation at synchronous speed was realized by applying the load, at least, 1.5 Nm

[1] F. Irie,et al. Characteristics of critical current distributions for oxide superconductors estimated from V-I characteristics using Weibull function , 1992 .

[2] Ji-kwang Lee,et al. Test of an induction motor with HTS wire at end ring and bars , 2003 .

[3] Jungwook Sim,et al. Development of a HTS squirrel cage induction motor with HTS rotor bars , 2004, IEEE Transactions on Applied Superconductivity.