Analytical model for tube hydro-bulging test, part I: Models for stress components and bulging zone profile

Abstract Hydro-bulging test is an advanced method for characterizing the mechanical properties of tubular materials under bi-axial stress state, by measuring the bulging height, pole thickness and internal pressure. This method has been investigated and applied over the past decades. However, different testing conditions and analytical models have been used in practice, which makes the tested results incomparable. In this paper, hydro-bulging tests with different constraining are first analyzed and compared, and a unified analytical model for stress components calculation is proposed for closed-ends and fixed-ends conditions. Finite element analysis of tube hydro-bulging with closed-ends and fixed-ends shows that both the stress and strain responses of the tubular specimen, i.e., the stress and strain components under different internal pressures, are almost identical to determine the stress–strain relations. Geometrical models for bulging zone are analyzed and compared with special attention on the calculation of the radius of axial curvature, which is one of the key parameters for both stress and strain components determination. A die-related ellipsoid model is presented and is well verified by experimental results on extruded AA6061 tubes.

[1]  Kengo Yoshida,et al.  Anisotropic plastic deformation of extruded aluminum alloy tube under axial forces and internal pressure , 2004 .

[2]  Stelios Kyriakides,et al.  Path-dependent failure of inflated aluminum tubes , 2009 .

[3]  Guo Cheng,et al.  Determination of stress–strain relationship of tubular material with hydraulic bulge test , 2008 .

[4]  Elisabetta Ceretti,et al.  The determination of flow stress of tubular material for hydroforming applications , 2008 .

[5]  Xu Chen,et al.  Cyclic multiaxial and shear finite deformation response of OFHC: Part I, experimental results , 2007 .

[6]  Pierrick Malécot,et al.  A simplified analytical model for post-processing experimental results from tube bulging test: Theory, experimentations, simulations , 2012 .

[7]  Edmund Chu,et al.  Hydroforming of aluminum extrusion tubes for automotive applications. Part I: buckling, wrinkling and bursting analyses of aluminum tubes , 2004 .

[8]  John J. Jonas,et al.  Deformation behavior of two Mg alloys during ring hoop tension testing , 2008 .

[9]  Shijian Yuan,et al.  Analytical model for tube hydro-bulging tests, part II: Linear model for pole thickness and its application , 2014 .

[10]  Taylan Altan,et al.  An inverse energy approach to determine the flow stress of tubular materials for hydroforming applications , 2004 .

[11]  Babak Farrokh,et al.  Multiaxial and non-proportional loading responses, anisotropy and modeling of Ti–6Al–4V titanium alloy over wide ranges of strain rates and temperatures , 2007 .

[12]  Toshihiko Kuwabara,et al.  Advances in experiments on metal sheets and tubes in support of constitutive modeling and forming simulations , 2007 .

[13]  Larsgunnar Nilsson,et al.  On constitutive modeling of aluminum alloys for tube hydroforming applications , 2005 .

[14]  Huilin Xing,et al.  Numerical analysis and design for tubular hydroforming , 2001 .

[15]  Yeong-Maw Hwang,et al.  Evaluation of Flow Stresses of Tubular Materials Considering Anisotropic Effects by Hydraulic Bulge Tests , 2007 .

[16]  W. R. Tyson,et al.  Ring Hoop Tension Test (RHTT): A Test for Transverse Tensile Properties of Tubular Materials , 2002 .

[17]  C. W. Wang,et al.  Flow stress evaluation of zinc copper and carbon steel tubes by hydraulic bulge tests considering their anisotropy , 2009 .

[18]  Mehdi Imaninejad,et al.  Influence of end-conditions during tube hydroforming of aluminum extrusions , 2004 .

[19]  Gang Liu,et al.  Formability testing of AZ31B magnesium alloy tube at elevated temperature , 2010 .

[20]  Weilong Hu.  Constitutive modeling of orthotropic sheet metals by presenting hardening-induced anisotropy , 2007 .

[21]  E. G. Price,et al.  Hydride orientation and tensile properties of Zr-2.5 wt% Nb pressure tubing hydrided while internally pressurized , 1972 .

[22]  Stelios Kyriakides,et al.  Inflation and burst of anisotropic aluminum tubes for hydroforming applications , 2008 .

[23]  Taylan Altan,et al.  Evaluation of tube formability and material characteristics: hydraulic bulge testing of tubes , 2000 .