A Surface Normal On-Machine Measuring Method Using Eddy-Current (EC) Sensor Array

[1]  John E. Inman,et al.  ONCE (ONe-sided Cell End effector) Robotic Drilling System , 2002 .

[2]  Fang-Jung Shiou,et al.  Calculation of the Normal Vector using the 3 × 3 Moving Mask Method for Freeform Surface Measurement and its Application , 2002 .

[3]  Tsunemoto Kuriyagawa,et al.  Development of Non-Destructive Technology for Detecting Grinding Burns , 2013, Int. J. Autom. Technol..

[4]  Xiujuan Li,et al.  The study of MovingTarget tracking based on Kalman-CamShift in the video , 2010, The 2nd International Conference on Information Science and Engineering.

[5]  Fang-Jung Shiou,et al.  Multi-beam laser probe for measuring position and orientation of freeform surface , 2011 .

[6]  Yoshiro Iwai,et al.  A method for detecting bearing wear in a drain pump utilizing an eddy-current displacement sensor , 2003 .

[7]  K. S. Chana,et al.  The Use of Eddy Current Sensors for the Measurement of Rotor Blade Tip Timing: Sensor Development and Engine Testing , 2008 .

[8]  Gui Yun Tian,et al.  The design of miniaturised displacement transducers for deep hole diameter measurement , 1999 .

[9]  Wenhe Liao,et al.  Auto-normalization algorithm for robotic precision drilling system in aircraft component assembly , 2013 .

[10]  Haidong Yu,et al.  Stiffness Analysis and Optimization of Supporting Mechanism Based on Tricept for Thin-walled Part Milling System , 2015 .

[11]  Xiao-Wei Zhang,et al.  Profile Measurement of Polished Surface with Respect to a Lattice Plane of a Silicon Crystal Using a Self-Referenced Lattice Comparator , 2011, Int. J. Autom. Technol..

[12]  Peng Wang,et al.  A frameless eddy current sensor for cryogenic displacement measurement , 2010 .

[13]  Y. Le Bihan,et al.  Lift-off and tilt effects on eddy current sensor measurements: a 3-D finite element study , 2002 .